Camileo P100 goes off when it is plugged to the PC

Similar Questions

• Satellite Pro L10: USB on and goes off when I try to use the USB modem

  I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
  When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

  I'm on XP Pro and usb Sockets work very well for a USB and a printer.
  I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

  It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
  I flashed the bios and updated as well as seems relevant that I can.
  I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

  A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

  Hey Buddy,

  T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

  Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

  Would appreciate feedback of your regarding your question.

  Greetings

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

  So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

  Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

  Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

  https://www.YouTube.com/watch?v=xc6Hwgedqmo

  This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

  My Acer Aspire V5 552 Specs are.
  Windows 7 X 64
  8 GB RAM
  AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
  AMD 8550G GPU
  I have all the latest drivers and updates installed.

  The charger is not damaged, it is original one supplied with the notebook.

  Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

  No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

• Windows Media Player does not open and I'm not find 'Turn windows features turn on or off' when I'm looking for the beginning. I need quick help.

  Windows media player not open yet

  Regarding "I'm not find 'Turn windows features turn on or off' when I'm looking for the start." ...

  Start > Control Panel > column to the left, choose Classic view > programs and features > column to the left, you will see turn windows features turn on or off the option. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• Windows 7 turns adapter wireless off when ethernet is plugged.

  I am running windows 7 on my laptop, and whenever I plug an ethernet cable into it automatically turns off my wireless adapter. I want to use networks wired and wireless at the same time but cannot find a setting to stop windows to do this. Any ideas?

  I am running windows 7 on my laptop, and whenever I plug an ethernet cable into it automatically turns off my wireless adapter. I want to use networks wired and wireless at the same time but cannot find a setting to stop windows to do this. Any ideas?

  You have a laptop HP or Compaq? If so, check your BIOS settings. Some portable HP/Compaq have a setting in the BIOS for LAN/WAN switching. It's the Wireless Assistant HP support on my HP laptop.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/LAN%5E_WLAN-switching.PNG

  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• At the start of my imac I type my password it starts to load then goes off when half way... advice?

  When you try to start my imac, it begins to read the files, then off to half way.

  One of the reasons could be an extension conflict. This happens when you see icons in the lower part of the loading screen? No difference if you press and hold down the SHIFT key during startup? Knowing the exact iMac model and the version of the operating system would be useful. Since this has been posted under Mac OS Classic (OS9, OS8 & System 7), I assume that the computer is running Mac OS 8.x or 9.x.

• Why a black line does not appear when I turn it on, but goes off when I start a program

  When I turn on my machine, I get a vertical black line on my back drop. When I select a program the line disappears. Can you please help me with this problem. Thank you

  Hello Georgehebden,

  Thanks for your post.  Try to start computer in Safe Mode with network and download / install the latest video driver for your computer.  Please let us know the results so that we can better help you get this issue resolved.

  See you soon

• (Dell LCD) screen goes blank when I connect. Requires the switching on of the screen on and outside

  (Dell LCD) screen goes blank when I connect.  Requires power to the power on and off screen, at least 15 to 20 times before picture stays on.  Any suggestions? No to the problem site so don't have the model numbers.  Dell computer and about 8 years.

  Looks like your monitor is having problems sync-ing for the resolution settings that you have defined for your monitor.  When you get your screen is displayed, right-click on an empty area of your desktop-> properties-> (tab) settings.

  Then, in the 'Screen Resolution' area, try to move the cursor to the end of 'Less' and click 'apply '.  It will then try to change to this new resolution.  If your screen is empty for now, just wait about 30 seconds and it will return to the previous resolution (which can mean that you need to power cycle your monitor you have done to get it back)-otherwise accept the settings if your display looks OK.  Try to find a solution that works with your monitor.  It is also possible that your monitor is going bad.

  HTH,

  JW

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• Satellite P100-347 off when moved - AC adapter is plugged

  Recently I had problems with what most likely seems to be the power cable and adapter on my laptop. Whenever I go to pass the laptop during its only on AC it seems bad connection and turned it.

  The battery will not charge also and when the machine is frequently on it toggles between the very low battery and an unreliable power!

  How can I fix it? The laptop is not very old, so I'm still under warranty and I assume therefore eligible for a replacement power cable and transformer?

  Hello

  Here in the forum, it is not easy to give an accurate diagnosis. The fact is that the described issue is not normal and we can only speculate on what the problem may be: AC adapter / CC or maybe the card electronics.

  Believe me the best thing you can do is contact services partners in your country. They check your laptop properly. Each part hardware replacement or repair is covered under warranty.

• Power supply Dell Optiplex 790 SFF cycles power on and off when it is plugged

  My new to me SFF Optiplex 790 does not start - pressing power causes a switch to send amber for a few seconds, the 1 + 2 diagnostic lights shine briefly, and then the system turns off. But wait... with power plugged in, it will try to restart every 10 seconds or until I have unplug the unit.

  System lasted about 30-40 minutes when I tested it, but it starts then power cycling.

  Power supply passes with built-in 'green light' regardless of any internal or external devices connected. I bought a sweater 'work' PSU, no change.

  Ideas for testing? System is stock, no mods or upgrades of what I see.

  Hello

  This system is out of warranty period so that any replacement of parts will be payable. That's why we can help you with the replacement of the part by sending the request for quote for parts and service or, Alternatively, you can buy the part of any provider of local service from dell.

  Serial number of the system also has information on the customers system so donot share it as a public message, send it out via private only message.

  Kind regards

• Power goes off when the PC is turned on, it says "disabled keyboard", Vista does not START or reinstall.

  My PC with Vista Home premium does not START because the keyboard does not work. It's a Dell Dimesion E521 PC with Vista.

  This happened after a power failure; I get a black screen that says «disabled keyboard» The key board works and the USB ports have power to them.

  The START menu was initially protected by Word, but I have the game ENTER the PASSWORD off the black screen by removing the battery inside the PC.

  She said a THERMAL cut-out has occurred. Does anyone have any info or ideas?

  Thanks for your time in advance!

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1e228424-E520-4ec5-AF99-252a6e645f75/

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Sound goes off when a game is open.

  Any time I open World of Warcraft or League of Legends, the sound goes out on my Presario F700 Compaq. IF I have music or ventrillo running in the background that goes out. I spoke with another player of World of Warcraft and they have the same problems and we all run Windows Vista. After that I have to restart or restart the sound works fine, but at any time if I open these programs simply sound cuts and forces me to restart. Any ideas? And yes I updated my sound cards and other from the website of the manufacturer.

  Hello

  Make sure you have the latest drivers, but I suspect that these are questions that need to be
  addressed by the authors of the game so I would check with their respective support options.

  -----------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version.
  Now click on update drivers who cannot do anything as long as MS is far behind the certification of drivers.
  Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1 site of the manufacturer of the system and look for the latest driver download - SAVE - spend to do a right-click on
  and RUN AS ADMIN (this is your rescue.) REBOOT after each installation of driver.

  NOTE: Sound drivers often of restoration in order to check the version after installation and the
  reboot to see if the version you have installed is there, otherwise repeat the installation - restart
  until it is. It may take several tries depending on the recommitments how much he makes.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.