Can a T310 to 4 disks?

Can a T310 to 4 disks?  I know that this is impossible with the S300, but what of the H700?

Yes, the H700 supports over 2 TB disks. The H200, but the H700 is a controller of a lot better.

Tags: Dell Servers

Similar Questions

  • Portege A100: where can I get the recovery disk?

    Anyone know where I can get the recovery for my portege a100 disc as my one was lost in a recent move of House as well as all my other software.
    any help would be received with gratitude

    Hello

    You can order the Toshiba recovery disks in the Toshiba authorized service partner in your country.
    Before posting questions, you should use the advanced search for similar topics. This similar issue was published a long time here in the forum

    Cordially ;)

  • Satellite A300D - where can I get a recovery disk?

    Hello

    I'm new here and I have a problem.
    my daughter bought an A300D-18 PSAHCE 00C00PGR in April 09.
    She says now, she tried to create a disc of recovery at the same time, but he failed.

    Now, I'm looking for a recovery for his vista disk Home premium SP2.
    Someone know where I can get a recovery for her disc?

    Hello

    I can only say ;) to check your user manual

    If you don t have a recovery disc, you can order directly into a new to Toshiba:
    https://backupmedia.Toshiba.EU/landing.aspx

    If the pre-installed operating system is still installed you can try create the recovery disk. I can recommend the DVD-R media, it worked for me.

  • Satellite A300-1BZ - where can I buy a recovery disk?

    I lost the recovery disk that I created all first & I'm now in place the crack after vista crashed on my. I was able to recharge it, but have some hardware problems serious that I can't solve such as inability to connect to the internet, etc.

    Can someone indicate where to buy a recovery disc please?

    Thanks in advance

    Hello

    Of course, you can buy a new recovery disk. Just click on the following link and order a new one:
    https://backupmedia.Toshiba.EU/landing.aspx

    In addition, you can download all the drivers and tools on the site of Toshiba, if you installed Windows on a drive of Microsoft:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Welcome them

  • Satallite 4100XCDT: where can I find the HARD disk?

    Hello

    I bought a Toshiba Satallite 4100XCDT Notebook in ebay. Now, I have to change my drive HARD, but where can I find the HARD disk?
    Please, I need the laptop in 2 days.

    I downloaded the manual, but I Didna´t there find hdd.

    Thanks for help

    see you soon,
    Dominik

    Hello

    The HARD drive should be placed on the left side of the laptop.
    I think that it of one near the port of slot and PCMCIA modem.
    At the bottom of the unit, you should find a screw holding the cover of the HARD drive.
    Remove the two black screws and lift the cover of the HARD drive location.
    Remove the two black screws, secure the HARD drive into the HARD drive slot.
    Grasp the HARD-drive carrier handle and pull forward to disconnect and remove the
    HARD DRIVE.
    Remove the four screws flat head of the HARD-drive bracket and lift the HARD drive.

    That s all ;)

  • How can I get a driver disk?

    Hi all.

    I have a situation.  I'm with CVI 8.0.1 with NOR-DAQmx version 8.1.0f1.  I am creating a distribution kit onto another machine to control the operation & collect data.  The machine that I put my software on a 6.9.2f8 OR-DAQmx & I tried to run my software on this & failed.

    When I try to compile the distkit, he invites me to the disc "May 2006."  I do not have the disc & can't get my IT Department. (that is another story).  I have records 2003, 2007 and 2008 None are accepted by the manufacturer of the kit.  I download the DAQmx 8.1 from your Web site and hope you can tell me how to do disk I put it on the shows until May 2006.

    I really need this project & I'm sorta myself here, any help would be appreciated...

    Thank you

    Rob

    You will not be able to give the DAQmx 8.1 disk system if she asks May 2006 driver disk. It's very particular about what discs he wants, because he doesn't know if all the components it needs can be found on another disk. This behavior has been somewhat improved in the new versions of the CVI, but in your case, if she asked in May 2006, you need to provide in May 2006. Unfortunately, I don't think there's any standard channel for you to get a new copy of this disc. It might be possible if you called to support, but I wouldn't count on that yet. I see two options:

    1. use one of the disks of the driver that you have (2007 or 2008) to upgrade the version of NOR-DAQ on your development computer. Presumably, this will upgrade all components which should have from the disk of May 2006, and the distribution build process should ask for one (or more) discs 2007 instead.

    2. do not include OR-DAQ in your distribution. Use your discs 2007 or 2008 to install NOR-DAQ on your target machine separately.

    A. Mert

    National Instruments

  • If my computer falls down can I use a backup disk to retrieve

    If my computer falls down can I use a backup disk to retrieve

    The best way to start is in safe mode and if it does not progress to a Windows repair disk.

    You haven't said which OS has your laptop or which model is it. Create a Windows for Windows 7 or Vista repair disc, depending on which is installed.

    Always start by trying to restore the operating system to perceive before even to consider so final option as a revaluation. The reasoning behind my statement is simple. An repair is non-destructive. An recovery is destructive and exterminates all what you had on your hard drive and start from scratch with no programs installed.

  • I can't create a new disk with unallocated space. What can I do?

    I'm afraid my C drive. If the part of the space has become not allocated. However, I can't create a new disk with unallocated space. The computer cannot me to creat new simple volume because there is no maximum. partitions. I don't understand what this means and what I can do?

    I came across this error myself, I could not worth, so I used a third-party utility which more came this restriction:

    Free Windows 7 partitioning tool:

    (This is the one I used) EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

    More information: tools to partition the free Windows disk: http://news.cnet.com/8301-13880_3-20058506-68.html

  • My hard drive has failed. I have Microsoft XP media center edition 2005. How can I get a recovery disk?

    I had a hard disk crash.  I don't care about data loss, but I bought a new hard drive and you want to install Windows XP media center edition 2005.  I have a sticker on the side of my pc with the product code.  How can I get a recovery disk?  Download the program from another PC?

    As your original failed hard drive, you would of course not be able to access any partition contained on this hard drive recovery.  Therefore, your best option is to contact the manufacturer of the computer and see if you can get the installation of their own media.

  • System broke down and how I can't restore my recovery disk or my windows disc premium one should buy another app GOLD...

    Microsoft Windows system report I am crashed right now I can't restore my recovery disk or have my windows premiun a disc buy a GOLD RECORD ANOTHER no: Please tell me I can't restore my computer right now im not on my count all ready and I have to kmnow pls before returning home that they have a free restore disk set my key it after me tell me please now Lee I really want to rto be sure after that long fight thank you cordially for you inquiry

    Hello

    1. what happens when you start on the desktop?

    2. do you have an error message?

    3. don't you make changes before that this problem occurred?

    4. are you able to boot the computer to any mode?

    Method 1:

    Start the computer in safe mode and try to run the system restore.

    Step 1: Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: run system restore and check. What is system restore? http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Method 2: Do startup repair in Windows recovery.

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  • How to re - activate my graphics card after replacing my hard drive? I can't find my recovery disks.

    My daughter's laptop hard drive died, so I replaced it. Now, she can't play the games she could play before. I can't find the recovery disks, but I never thought it would be a problem. I have Windows Vista install, I did without problem. The laptop is a CQ62-101TX. But the site of HP is not a real pack of drivers... Simply select those.

    So, even if the laptop works for things like browsing the web and Microsoft Office, he cannot read the games. Before the crash of the HD, she was able to play games of high intensity graphic (Sims 3 was his favorite). However, after installation, the game continues to say here that he cannot find a DirectX 9 c compatible graphics card. Manager displays the card as a generic VGA card. I tried to install the Radeon Mobility drivers, without effect.

    Any ideas? Thanks in advance!

    Hello:

    Here is the link to the latest version of the driver for the graphics card Radeon HD 4250.

    http://support.AMD.com/us/gpudownload/Windows/pages/radeonmob_win7-32.aspx

    Best regards

    Paul

  • my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

    my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

    Hello

    Here is the vista forums

    Try the repost in Forum windows 7 the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

  • Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

    Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

    Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

    The DVD player worked before HARD drive went bad now, it won't work.

    And I just replaced the HARD drive, but now cannot load an operating system that he...

    Help, please...

    Hi dynamitenews

     

    1. are you able to boot to the desktop?
    2. what happens when you try to start the computer?

     

    You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

    Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
    http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

    If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.

    BIOS WARNING-
    Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    I hope this helps.

  • Can I use the same disk to install Windows in 2 devices

    Hello

    I was wondering earlier this year I bought Windows 8 for my laptop game. And now I'm upgrading to a desktop PC Windows games with windows 7, can I use the software disks even if I connect to my Microsoft account. In other words I re can I use the disks if they are associated with the same account?

    No, you can't, 1 license, 1 computer.

    The key that can be used with 32-bit or 64-bit of Windows 8 is exclusively for 1 disc. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 8 32-bit or 64-bit on another partition or another computer, you must purchase an additional license.

    http://www.Microsoft.com/Windows/buy/default.aspx

    http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

    If you comply with these license terms, you have the rights below for each license you acquire.

    1 OVERVIEW.

    a. software. The software includes operating system software. This software does not include Windows Live services. Windows

    Live is a service available from Microsoft under a separate agreement.

    b. license model. The software is licensed on a basic computer copy. A computer is a physical hardware system with internal storage capable of running the software. A hardware partition or blade is considered be a separate computer.

    2. INSTALLATION AND USE RIGHTS.

    a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

    b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

    c. number of users. Except as provided in these license terms, only one user may use the software at a time.

    d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  • Change sharing permissions, now I can't access the local disk

    Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
    Thank you

    Hello

    I suggest you to follow the steps in the link given below and check if it helps.

    How to open a file if I get an access denied message?

    http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

    Let us know the status of the issue.

Maybe you are looking for