Can add you more than three images in a slide show?

Similar Questions

• Can pop you more than a local directory?

  Do not know how to proceed. It only sends to a directory
  
  < xapi:delivery >
  "< xapi:filesystem output="/dir1/file.pdf "id ="111"/ >
  "< xapi:filesystem output="/dir2/file.pdf "id = '112' / >
  < / xapi:delivery >
  
  I then tried 2 separate < xapi:delivery > with the same result. I know that I can always copy the file from 1 directory to another. But the file name is not known at run time

  make a multiple application for assistance.

  XAPI:request

• How can I take a single selected image to a slide show to move to another page?

  I have a slideshow of images from which a user must select a (for example, the image that is featured in a lightbox after successively the thumbnail) and then go to another page for more details on this image, with the same image again, and where I want to incorporate some html to provide more options based on the selected image. How to pass the name of the object from one page to another? How do I detect that a user has selected an image?

  I tried to place each image in the table light as a hyperlink to a new page and also tried to settle his legend as a hyperlink, but none of these ideas seem to work (at least in the preview).

  Any suggestions please? I work in Muse CC 2014.

  Creating a hyperlink from the text of the legend should work. Try the preview: file/preview in the browser to test Site.

  (I tested it using Preview and file/Preview Site in the browser and it made a link to the page that I've assigned)

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• I often receive an email containing more than 10 images, but when I get this message, I can't as a pop up comes up and tells me that I must remove some of the attachments.

  I often receive an email that contains more than 10 images (attachments) but when I get this message, I can't as a pop up comes up and tells me that I must remove some of the attachments that would destroy a part of the message.  What should I do to correct this?

  The images may be too large to send massively as they must be encoded to send by e-mail, and this coding can add as much as 40% of the size of the message.  You can resize to fit the web by reducing their dots per inch to 96 (screen resolution) and then saving them as a compressed jpeg files.  IrfanView (www.irfanview.com - free) will do this for you.

  You can also try Message | To send as an attachment and see if it goes through.

  Steve

• Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply a different video transition effect to each photo. It might even be random effects. I see that I can apply a unique to all p transition effect

  Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply different transitions video effects by alternating each photo. It could be random effects. I see that I can apply a unique pictures transition effect at the same time, but how to apply different transitions not one by one? I could do a clip applying different transitions manually as I wish between hundreds of photos, but I would like to be able to repeat all the transitions of a new video by changing only the photos. Is this possible? Or a tool to apply random transition effects between photos? Or a way to automate the actions to apply different transitions similar to what we can do in Photoshop? Thank you!

  But how to apply different transitions not one by one?

  You can not.

  If you wish to make a slideshow with all the transitions better fantasies use something like Pro Show gold.

  Alt drag window project replaces clip/still on the timeline.

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• Pls help: using Windows DVD (& Vista Home Premium) - can I burn more than a 'slide show' on a single DVD disc?

  I use DVD Maker (& Vista Home Premium).  Can I burn more than one slideshow on a single DVD disc?

  I saved 3 different 'projects', each has 10-15 images.
  When I use the screen 'Add items' to try and add these 3 different projects on my DVD I wind up just with a great slide show, which has 30-40 pictures in.
  What I want on this DVD is a separate slide show for each of the 3 projects.
  So can I implement a Menu of this DVD, which allows me to choose which of the 3 projects (slide shows) that I want to watch?
  Can I do this?  If so, how?
  Thank you!!!

  I use DVD Maker (& Vista Home Premium).  Can I burn more than one slideshow on a single DVD disc?

  I saved 3 different 'projects', each has 10-15 images.

  When I use the screen 'Add items' to try and add these 3 different projects on my DVD I wind up just with a great slide show, which has 30-40 pictures in.

  What I want on this DVD is a separate slide show for each of the 3 projects.

  So can I implement a Menu of this DVD, which allows me to choose which of the 3 projects (slide shows) that I want to watch?

  Can I do this?  If so, how?

  Thank you!!!

  ==========================================
  It's a matter of time.

  Save each project in the. Film WMV format. Then you can import
  the three films in DVD Maker files and each of them will be a chapter...
  This way, you will have a menu.

  Once the DVD-video is encoded you cannot add additional files
  the DVD.

  If you need information on how to save... validate your version of Movie Maker.

• Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

  Is it possible add more than 2 GB of memory?

  What happens if I add e.g. 2 x 2 GB?

  Intel says GM965 supports 4 GB max memory...

  BR,

  Mikko

  Hello

  No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

  > What happens if I add e.g. 2 x 2 GB?
  I think that nothing will happen ;)
  Either your laptop will not start or will start the laptop but the full RAM will not be recognized

• Is it true that I can not run more than 60 Hz on screen?

  Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?

  Why do you want to change the screen on the TFT screen refresh rate?
  LCD monitors do not suffer the same problems as their predecessors of the TRM and the refresh rate does not simply mean the same thing. LCD or TFT monitors will provide excellent quality and resolution at 60 Hz.
  Its response time, brightness of the Image and the Image contrast ratio the most important question for a TFT or LCD monitor.

  Operating systems set the different default refresh rate. Windows 95 and Windows 98 (se) together the highest refresh rate possible. Running Windows NT operating systems such as Windows 2000 and Windows XP descendants, however, by default the value of the for the 60 Hz refresh rate.

• Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours

  Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly

  Hello
   
   
  1. remember you number updates that have been installed?
   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 2.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   

  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.

   

   

   
  I hope this helps.

  Kind regards
  Support Microsoft Savan-

• Adding a voting drive. Can we have more than 1 drive to vote?

  Version: 10g R2
  
  In the documentation, I read the following command adds a voting drive. But, can we have more than 1 drive to vote at the same time?

  crsctl add css votedisk /dev/raw/raw4

  read this, it will help you
  Reference:-issue voting disk

  answered by Silva

  (1) why don't we not create an odd number of voting record?
  With regard to the vote of the disks are concerned, a node must be able to access exclusively more than half of the discs with the right to vote at any time. So if you want to be able to tolerate a failure of n disks to vote, you must have at least 2n + 1 configured. (n = 1 means 3 discs with voting rights). To you can configure up to 32 disks with voting rights, to the providing protection against the 15 simultaneous disk failures.
  Oracle recommends that customers use drives 3 or more with right to vote in Oracle RAC 10g Release 2. Note: For best availability, 3 files of voting should be separate physical disks. It is recommended to use an odd number as 4 drives will be more highly available than 3 disks, 3 1/2 is 1.5... rounded up to 2, 4 1/2 is 2, once we lose 2 discs, our cluster fails with 4 disks with voting rights or 3 discs with right to vote.

  (2) only the cluster checks actually for the counting of the votes before node eviction? If so, could you expain this process briefly?
  Yes. If you lose half or more than all your discs with right to vote, then nodes get evicted from the cluster, or nodes to expel from the cluster.

  (3) what is the logic behind the documentaion note which says "each node must be able to see more than half the disks with right to vote at any time"?
  The answer to the first question is will also answer this question.

  Source:-issue voting disk

• More than one image

  How can I open multiple images at once to post-secondary studies

  Assuming that you have PES 9 and you mean you want to see more than one image on the screen at the same time, you must go in the editor preferences > General and turn on allow floating Documents. Then, you can use the menu arrange, if you have tabs, or the Image menu to create floating windows.

• Set the values of more than three per link report column

  Hello
  
  In my application, I need to put more than three points (on the target page), when you click on the column (it is a link) using the values present in this page.
  By report link column we can set only three values, y at - it another way to define several elements (plus three).
  Thank you
  Pavan Reddy
  
  Published by: user10820560 on March 17, 2009 13:28
  
  Published by: user10820560 on March 18, 2009 08:24

  Just enter several element names and values separated by commas in each input field for name/value of an element.

  Scott

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help