Can Android and Apple share the same project?

Similar Questions

• CPO of licensing - can dev and prod share the same license?

  We used the trial for about 3 months now for my dev VM, we ordered server and license of cisco, but reckoned the server aren't ready yet. Can I use production licence, we bought on my dev VM and eventually my VM to production?

  Thank you

  Cendrine.

  Customer PO licenses are locked to a specific server node.  You will need a license code selarate for each system that you defend.  This includes extensions of the trial for the customers.

  When you install a new system, you get a trial license with installation which is good for 30 days after initial installation. After that all licenses are node locked.

• Using clips with different frame aspects and pixel in the same project

  Hello

  I have two clips:

  clip1: AVCHD 1440 x 1080 and the rationing of 1.3333 pixel aspect (the ratio of the image is 4:3)

  Clip2: AVI 720 x 576 pixel aspect ratio of 1.0940 (the ratio of the image is 5:4)

  I want to use the two clips on the same project.

  I chose a project suited to the preset clip1. (in this case most of my images will be of this format).

  If I do not make any changes to the elongation of pixel (using the Interpret Footage) the result is that the letter boxing serves around clip2. It is acceptable but not ideal.

  Can I change the format of clip2 pixels so that it is the same proportions as clip1? If I do this but I don't eventually clip2 distortion? What would be a worse result than the current situation with letter-boxing.

  Can someone advise; is it possible to merge these elements from two sources into a single output seamless file?

  With our thanks

  -Justin Wyllie

  Justin,

  If the IRON Clip 2 (size of pixels) is correct, i.e. the film doesn't look like stretched or squeezed, I wouldn't do any adjustment to that.

  To reduce or completely remove the black borders around it, you can adjust the fixed effect > Motion > scale, to fill the large size of the frame. Note: due to the difference in image format, to fill the full scope of the project, you will be actually reframe some of top and bottom. Using the fixed effect > Motion > Position, you can adjust exactly where culture goes, say all high, or to all of the background, or by a different ratio of high & low. This choice must be based by the framing of the topic in Clip 2. This choice is yours.

  Note: when scale upwards, quality will decrease, but maybe not too difficult to use only images, but the decision is yours also. There are several programs, and some that are plug-ins, this top-floor a little better than the Motion > pre scale. I would investigate those. One Magic Bullet Instant HD Red Giant, was used by many, even if some users were not enough to buy the pleasure. Just something to consider.

  Good luck

  Hunt

• My wife and I share the same iCloud account...

  Can she still receive texts if I uncheck his phone # on my iPhone-> settings-> messages-> Send and receive?

  Nothing else on our phones suffer... or on my MBP her time with El Capitan... or his iPad with iOS 9.2.1 iMac?

  We have all two 6s phones.

  Thank you

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• How to use the OS Android and Windows on the same shelf?

  Original title: is it possible I ca use the OS android and mircosoft OS?
  Is it possible that I can used both ANDROID OS and MICROSOFT OS at the same time in my Tablet?

  You will not be able to install the Windows operating system on an Android device.

• Multiple application to the same project

  Hi all

  I wish I had 1 application runs as a service to start and another is a UIApplication to set the variable to the first application. How can I do this in the same project?

  I try to separate two project but when running, I got the below error

  Class 'com.mytest.phone.UserInfo' multiply defined.

  The linker error: "VerifyError" for MyTestSetting_BB

  Error starting MyTestSetting_BB: 'com.mytest.phone.UserInfo' multiply defined class.

  Two projects use UserInfo for storing data persistenly.

  Thanks in advance,

  POJ

  I'll just try to rephrase what Simon and Bika have already said, but otherwise it's maybe a little clearer.

  The BlackBerry smartphone does not load two classes that have the same name.  Of the same name, in other words the package and class name.  If you have a PersistentData class in the com.myorg.testapp1 package, as well as in the com.myorg.testapp2 package, then here is therefore not the same thing, even if the class name is the same.

  However for process objects in PersistentStore, the same class should be used.  So even though the two classes PersistentData in testapp1 and testapp2 were the same, the BlackBerry only would leave one of them extract the data.

  So to store data in PersistentStore which is used by the applications of two (or more), you should use a common (shared) class.  An easy option is to use standard RIM provided classes such as vector and String.  But that can make life a bit difficult.

  The simplest option is to share classes between applications.  This can be done easily in the JDE.

  Step 1: You create a project that is testapp1 and another is testapp2.

  Step 2: Then you create a third project of the library, which provides the object that will be stored in PersistentStore (and of course, this might have any other components shared as well).  Let's say this project is in the com.myorg.shared package.  Then com.myorg.shared we PersistentData class, she object that is persistent.

  Step 3: You are doing the project two testapp dependent on the com.myorg.shared library project, just the dependencies of the project

  Step 4: You import com.myorg.shared. * classes in testapp classes that use data from PersistentStore.

  I presume that you can do this kind of thing in Eclipse, but I don't him did not.

  Once you understand this, then you can create library files that are in independent work spaces, so that you can maintain testapp1, testapp2 and share completely separated.  But is not too far for this explanation.

  But in short, you do not add the same class for two projects, you make sure that the projects share the same class.  To achieve this, have three projects, two applications and a library.

  Hope it makes sense.

• Two tasks that share the same resource in sequence

  I'm the current exception "the specified resource is reserved.". I understand that you can not run two tasks that share the same resource at the same time. However, is it true that you can not run two tasks that share the same resource, one right after the other, without the eliminate completely from the first task?

  for example

  Task1 and task2 share the same resource
  
  Task1. Start();
  
  Task1. Stop();
  
  Task2. Start(); This will always throw an exception until you have a task1 (i.e. task1.) Dispose()?
  
  Task2. Stop();

  Hi cafarm,

  You're right, the fact to just stop at one task does not allow that run you another task with the same resources immediately after. That being said, you can start the next task without having to erase or dispose of the first by making use of the task status template DAQmx. As you can see on the next page, stop a task simply going to the State of "Clerks", which means that the material is still used by the task even if she does not actively.

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Instead, you can use the control functionality of task for the first task of transition to the status "verified" after stopping it, then start the second task. This keeps the parameters of the task without having to have the task, but it should free up resources to be used by other tasks.
  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

• Internal Web deployment of Android & IOS app on the same page

  HI am delopying our application on both android and IOS in the same secure Web page as 2 links.

  I use the older DPS documentation and it works for IOS.

  What should I do different for the Android? Is there a reference article?

  You have two options:

  (1) post the .apk on a website and send the link autour. The downside is that your users will need to allow the installation of app of unreliable sources to make this installation work.

  2) distribute via Google private game channel. Start with distribute Android apps in your organization - Google Apps admin help center for more information.

  Neil

• My wife and I have apple devices can we share the same cloud

  My wife and I have iphones can we both share the same cloud and how?

  Welcome to the Apple community.

  Yes, but why would you do that, it's really not recommended. If you tell us what you expect there may be more effective than the sharing of ID.

• My 5s possible remote jailbroken and hacked so I share the same ID Apple and the person knows my passwords?

  My 5s possible remote jailbroken and hacked so I share the same ID Apple and the person knows my passwords?

  N °

  What makes you think that this could happen? If you share an Apple ID with someone and they know a lot of your passwords, they have access to a lot of your information. Change your passwords.

• I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  You can check the order of Lightroom Mobile synchronization.

  Click on the collection name and choose the last option to sort.

  It should be similar to this screenshot:

  

  Once you get to know Lightroom Mobile images sort order, you can set the same sort order on your desktop of Lightroom.

• Help! CC of PHOTOSHOP: I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

  I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

  If related files please consult are located next to the file that contains the duplicate folder and edit files duplicate so corresponding should translate into changed content in the file duplicate.

• If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  Some actions have been removed in Firefox 4 and later versions.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  browser.gesture.pinch.latched -> false
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  Welcome to the Apple community.

  I'm afraid that is what happens when you share an Apple ID.

  Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.

  I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.