CAN bus off fast recovery and recovery slow modes

Similar Questions

• My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

  My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

  Hello

  1 are. what type of files?
  2. when they are stored?

  3. What is the size of these compressed files?

  Try to perform the clean boot on the computer and check if that helps.

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See the bottom of the articles that might help you resolve this problem.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• The CAN bus activity: why can I not see my CAN bus activity using MAX and a NI USB-8473?

  I use an NI USB-8473 and Measurement & Automation Explorer on a CAN bus I know works.   He does not see as a traffic CAN bus.

  Any ideas on how to trouble shoot to find out why this material does detect any signals at all?

  DOH!

  We've all been there.  I'm glad you have work.

• Reset of the CAN bus without knowing the reference of the tasks

  Hello everyone,

  I use the API CAN channel to read data from a CAN bus while at the same time taking measures using other DAQ devices. When my VI throws an error after the CAN bus has been initialized and started, try to kick start my VI will force the init-start CAN VI throw an error because the channel is never allowed.

  Is there a way to clean a channel CAN without having a special reference to the wire? Otherwise, how could I solve this problem?

  Thank you!

  Erik

  Hi Erik,

  Is the error that you are experiencing from the same service on a regular basis?  If Yes, what can be done before adding them to the whole application of error handling, you can add a case structure, use the cluster of error in this function to act as the selector for the structure of the case and add a Clear Channel command to the real case of the structure, followed by an error handler.

  Now, that being said, I still recommend using throughout the application, management errors, especially if this will be distributed as an executable file.  But for purposes of development, it is perhaps the fastest way to implement a clear failure of the VI function so that it restarts correctly on the next iteration.

  Kind regards

  -Dave C

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."

• System broke down and how I can't restore my recovery disk or my windows disc premium one should buy another app GOLD...

  Microsoft Windows system report I am crashed right now I can't restore my recovery disk or have my windows premiun a disc buy a GOLD RECORD ANOTHER no: Please tell me I can't restore my computer right now im not on my count all ready and I have to kmnow pls before returning home that they have a free restore disk set my key it after me tell me please now Lee I really want to rto be sure after that long fight thank you cordially for you inquiry

  Hello

  1. what happens when you start on the desktop?

  2. do you have an error message?

  3. don't you make changes before that this problem occurred?

  4. are you able to boot the computer to any mode?

  Method 1:

  Start the computer in safe mode and try to run the system restore.

  Step 1: Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: run system restore and check. What is system restore? http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Do startup repair in Windows recovery.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Windows Vista 64-bit system recovery stopped in the middle of the process, I can't even click F12 and restart again

  I did system recovery on my toshiba m305d-s4840 laptop computer Windows Vista 64 bit and the wire of the laptop was not connected and the battery died, now I can't do anything on the computer I can not even click F12 and restart again once, what do I do to solve this problem, the computer does nothing when you turn it on It's in the green bar at the beginning (loading screen)? Please help, thanks

  Hello

  Whether you use the Toshiba recovery method, I suggest you contact Toshiba support for help with what is their method of recovery which has been interrupted.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  See you soon.

• my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  Hello

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  Hello

  Please follow instructions on the link below to see if the recovery discs are available for your laptop:

  http://support.HP.com/us-en/document/c00810334

  Paul

• How can I increase my recovery drive (d). It is fixed to 15 GB and I have tons of free space and want to bring to about 40-50 GB

  After only 1 or 2 backups, it overflows. I want to open more space and I see a few large files, but I don't want to delete them without knowing what they are.

  NT ATLEE/SYSTEM IS one of them to 12.5 GB. It doesn't seem likely that it would be to delete. I have no junk left to remover or.

  I recently got burping on IE. I recorded everything and can reinstall the whole system, drivers, updates, etc.

  Before that, I would like to know how to enlarge my recovery in order to have several bakups to restore later if necessary, without having to go through everything.

  Sometimes I save a backup elsewhere for easier restoration also.

  Using Win 7, IE 7 again, on a not to mention dell POS.

  Really, I hesitate to use the most recent EI, until the BS is that they are ALWAYS overcome. Maybe it's time to IE8? Laughing out loud

  In any case, all I really want is to expand my recovery disk. Tons of free space on hard drive. 844 franco departure 916 GB.

  I seem to be close, but can't get on top. I have taught myself since military-electronic learning computers and

  1 semester electronic engineering in College 20 years ago. Just bought 1, turned on and started fishing around end 90. All I really need to understand is interface software and programming stuff.

  This seems to be a basic enough scheduling feature to be able to do it myself.

  Thanks in advance, Greg

  If you are sure that you have the means to re - install Windows, and you did the Dell recovery discs at some point in time, you can extend the old recovery partition using a 3rd partition manager left...

  EASEUS... http://www.partition-tool.com/

  The original version is free.

  I know what you mean re get hard drives of duff replaced.

  One of my clients gave me a laptop to watch because he was working like a dog. Even if the built-in diagnostic tests showed clearly that the hard drive had gone as West, the company offers some more.

  I have little time for OEMs or department stores that pass the junk on members of the public.

  Support is disgustingly bad when it comes to replace defective hardware and not better for software either. They're just...

• How can I determine the size of the fast recovery area?

  ORACLE DB 12 c EE Windows:

  All the rules are available to calculate the size of the fast recovery area?

  See the ORACLE 12 c documentation:

  http://docs.Oracle.com/database/121/BRADV/rcmconfb.htm#BRADV89425

  Disk quota =

  A copy of database size +.

  Size of an incremental backup.

  Size (n + 1) days of archived redo logs.

  Size (y + 1) days of archived foreign newspapers of recovery (for logical standby) +.

  Size of the control file.

  Size of the online redo log member * number of newspaper groups.

  Size (based on the value DB_FLASHBACK_RETENTION_TARGET) flashback logs.

• Re: Can no start, no recovery, I burn the other pc recovery partition?

  My Satellite L300 will not start over. All attempts at recovery failed (blue screen "STOP 0 x 8086").
  The command chkdsk from another PC also partially failed. The hard drive needs to be replaced.
  However, the recovery of the hard drive partition can be accessed from another PC or DVD to boot from linux.

  I intend to buy a new hard drive but do not have the DVD to implement recovery.
  Should I buy the DVD of recovery since the support site or can I burn the recovery from another PC partition after you mount on the sick drive?

  Can I download the software creator of recovery on any PC disk, then burn a dvd recovery partition and you may use the recovery burned disc to install a new hard drive?

  Thank you.

  > Should I buy the DVD of recovery since the support site or can I burn the recovery from another PC partition after you mount on the sick drive?
  Something like this is not possible.
  You must buy DVDs of initial recovery and you can order it on https://backupmedia.toshiba.eu/landing.aspx
  > Can I download the software creator of recovery on any PC disk, then burn a dvd recovery partition and you may use the recovery burned disc to install a new hard drive?
  Forget it. The thing whole doesn t work on this track.

  Buy Toshiba Recovery and install the original recovery image on the new HARD drive. It costs a little, but it is easier and faster way to have good workbook with the factory settings.

• Pavilion g series 1016-tx: with a burned (more likely) display card, I can't get done recovery without getting a blue screen

  Hello all, I have this old laptop that has one of these double called graphics cards. Unfortunately the ATI you won't work after a few years, I get blue screen when you try to start. I disabled the ATI display driver, and he worked well with the integrated INTEL card.

  And then I tried to restore the thing to factory default settings by using the Recovery Manager. Once more I am getting blue screen when you try to start, which means I can't get the recovery made. And this time I won't be able to boot in safe mode to disable the display driver.

  Any help?

  Hi @JonJon ,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have a failed graphics card that overcame you by turning off that one and using the integrated card, when you tried to perform a recovery, that he had failed as a result of the card, recovery won't work due to the fact that it tests the equipment prior to installation and of course it will detect the problem.  I don't know, but after talking with a colleague, you should be able to install from a disk of Windows, but I am not sure. You may be able to download Windows from the web, if this is not possible, it would be probably more cost-effective to replace Notepad.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Fast recovery area size

  Oracle 11g r2 on Linux.

  The system configuration:

  + DATA (ASM diskgroup data multiplexed logs file online and control files of 300 GBtotal capacity)

  FRA (file system like ext3 on the ability of oradata/u01/oradata of separate drive of 300 GB of cooked)

  Now create the database with the dbca Wizard:

  On the homescreen "Multiplex Redo Logs and control files", I specified oradata/u01/oradata (located on the drive of FRA) and another copy to the location by default of the + DATA diskgroup.

  On the screen of the fast recovery area:

  Fast recovery area: / u01/oradata
  Fast recovery area size: 4122 M bytes
  Enable Archiving-> Archive Log Destinations: / u01/oradata

  
  

  This ASSESSMENT will take the following files to run:

  1 multiplexed online redo logs and control files

  2 archived redo logs

  3 game data files backup (full and incremental)

  Given the fact the + storage capacity is 300 GB and the FRA will hold all of the above files, can I change the default 4122 MB to a number close to the 300 GB, such as M 290000 bytes?  or any other number (less than the size of the FRA disc).

  Thank you

  Scott

  You have specified/u01/oradata as the location of your fast recovery area. And then you have specified/u01/oradata as the location of the error log archive and multiplexes onlne logfiles. This will cause terrible confusion. Just because they are in the same path does not mean that they are the same thing. If you did as you described, you do not use the FRA at all. You will need to ask the IS_RECOVERY_DEST_FILE of the views column to check if a file is actually in the FRA, rather than just happening to be in the same directory of file system.

• How can I exit the recovery mode when I updated to iOS 10? !!!

  How can I exit the recovery mode when I updated to iOS10?

  Connect the device to your computer and use iTunes to reapply the update.  It worked with my Pro iPad after I first tried to live update. He went into recovery mode, so I had to download the update in iTunes and updated (new), but he returned right after that.