Can G - sensor on hard drive - I do the external HD?

Similar Questions

• Can I have macbook start up from my external hard drive instead of the internal HD of the laptop?

  I use a macbook air 2014 model and would like to know if I can boot the mac from an external hard drive rather than the inside. The reason to do this is to save space on the laptop and updates can be installed directly on the external hard drive.

  Is this possible? Forgive me, because I'm not that tech savvy. Thank you in advance!

  Yes. Install or clone of Mac OS X on it and then select it in the pane of the system preferences Startup disk.

  (143481)

• version of 256 GB of omen 15 2016: can I add a HARD drive on the 256 GB 15 2016 omen version?

  can I add a HARD drive on the 256 GB 15 2016 omen version? Thank you!

  Hello

  Yes you can. But you need part number 858969-001 connect new 2.5 "HDD/SSD to the Board of Directors.

  Kind regards.

• How can I clean my hard drive

  How can I clean my hard drive

  'Clean up '?  Do you mean delete?  If so, follow the instructions to clear it down here:

  What to do before you sell or give away your Mac - Apple Support

  'Clean up' means to get rid of some extra too much room?  See 'Release of disk space' here:

  OS x: what is 'other' space about this Mac? -Apple Support

• iMac 10.4 - utility disk erasing option is grayed out. How can I erase my hard drive?

  Hello

  I have an iMac 10.4 - utility option in the disk, the delete option is greyed out. How can I erase my hard drive?

  Hi GJuss,

  What is your boot volume? If so, you will not be able to.

  It is an external hard drive?

  Kind regards

  BleverCastard

• Pavilion P6235uk: can I install second hard drive on PC?

  Hello. I was wondering if I can install a second hard drive on my PC.

  The present Sata hard drive has a capacity of 640 GB.

  If there is a port to spare for a second hard drive, is there a maximum useful?

  And everything would make SATA 3.5 '' hard disk fit? I would be grateful for any advice.

  Thank you

  laurencewithau

  I found This MANUAL that shows not only a place to another hard drive, but also shows how to install it.  Begins on page 18

• Can I install 2 hard drives in my HP Pavilion p6650z?

  We need to get a new hard drive, and I want to migrate EVERYTHING on the hard drive of origin to the new - not only files, but the OS and channels.

  My question: can I just install a second hard drive (internal) in the case of my p6650z?

  This would make everything more easy - I could then everything on the old hard drive, migrate to the new.

  I could then remove the old hdd or maintain...

  
  HP LaserJet p1102w

  HERE , it is the user and the maintenance for this guide.  The hard drive section begins on page 17.  It seems that there is space for two hard drives in the drive cage.  There are four SATA ports on the motherboard, which looks good to go, too.

  If you expect to "hover over to the new drive" - I use a cloning software and just do the new hard drive boot disk.  Once you are satisfied of this and everything looks good to you, reformat the old drive for usage data.  In my humble OPINION, clone the old drive to the new hard drive using either the function of the cloning is available from the website of the manufacturer of the hard drive or use Acronis, then unplug the old one to make sure you have what you think is starting on the new hard drive to check the new disc is good and has everything you want.  Can do everything with the old drive for data.

• Can I install second HARD drive in the Satellite A200-AH7

  I wonder if I can install the second hard drive in my laptop and if I can do this what equipment should I.

  Laptop computer has two covers of hard disk and manual is not clear on this subject.
  He said: some models.

  Thanks for the info

  You can't find the answer very easily.

  Remove the second HDD Bay cover and check if there are a few HARD drive connectors/pins.

  If Yes, then you could install a second HDD.
  If not, you can not use second HARD drive.

  Good bye

• CQ62-423NR: can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter?

  Can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter? I have the maximum memory (8 GB)

  Hello

  Yes, you can put any SDS/disc HARD SATA to USB HDD enclosure and you can use it as any HARD drive externally.

  Kind regards.

• Pavilion x 2 10-n100na: can I add a hard drive from a HP Pavilion x 2 10-n100na?

  Can I add a hard drive to a Pavilion x 2 10-n100na? I noticed that some models in this range, for example. the Pavilion x 2 10-n107na, have a 1 TB drive. These 2 machines appear identical on the outside, so I was wondering if the 10 - 100na has all the required internal connections such as I could slot in my own hard drive.

  All answers gratefully received. Thank you.

  @Huffer

  I noticed that the manual indicates that it is for some models only, but unfortunately there is not any information about who they are.

  I have to disagree with you and say no.

  You cannot add a disk hard unless your x 2 is one of the special types.

  In the manual, you'll notice that even the keyboard, the coverage and the closing of the bottom are different. Take a very close look at this manual.

• Pavilion 17-f061us: HP Pavilion 17 - f061us so I can add a second hard drive

  I can add a second hard drive to the Pavilion 17-f061us

  Not in the way you think. There is only a single hard drive 2.5 inch Bay, unlike the similarly named 17 t envy which has two slots for drives.

• I can't get my hard drive to recognize that I have a CD in the tray

  I can't get my hard drive to recognize that I have a CD in the tray.  I can only open and view those that I already copied. Why?

  There are a number of possibilities here.

  1. assuming you have tried several different blank CD (if you are fairly confident that the problem is not the media), it is possible that the laser "burning" the recordable CD is dead. Because this isn't the same laser that reads the CD, you can always read but not write.  If this is the case, the only solution is to buy a new CD player (not expensive).

  2. your CD drive (E :) shows when you click on my computer?  I think it does, or you did that you can open and view copies of files, you have already copied to other CD.

  3. open Device Manager (start > run > devmgmt.msc > OK)

  • Expand the category of CD-ROM/DVD-ROM readers by clicking on the + sign to the left
  • Y at - it a warning next to the entrance icon?
  • Double-click the entry for your CD player
  1. That said under the "device status".
  2. What would you say (at the bottom) under "use of the device.
  • Close the Properties window and Device Manager

  4. open my computer, right-click on the icon for your CD drive and select Properties

  • Is there a tab "recording"?
  • If there is a 'Recording' tab, click on it.  Is the box to "Enable the writing of CD on this drive" checked or unchecked?  (Do not change at this stage)

  I'm not very familiar with Media Center Edition.  In the past, when you copy files to a CD, how did you do?  You just drag files to the letter of the CD-ROM drive in Windows Explorer, or did you have to open an app?  If the latter, what application you use to copy files to a CD.

• I can't defragment my hard drive, even though I cancelled the chkdsk command.

  Whenever I have try to defragment my HARD drive, I get the Error Message: Disk Defragmenter has detected that Chkdsk is scheduled to run on this volume (c). Please run Chkdsk/f. I ran, canceled regular for the C: drive, but I still get the same error message whenever I try to run Disk Defragmenter. What else should I do to fix this?

  When you try to defragment a volume of that Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

  Entry of commands to reset or erase a disc awaiting review is therefore a waste of time - that is not the problem.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p).  You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.

  You also won't solve this problem by editing your registry database - not where is the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.

  If you need help in doing this, I'm sure a technical support engineer can tell you how, and if not, I'll give you instructions.

• Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Gurra wrote:

  Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Hello

  The right part for the hard drive kit is 681976-001. The website of the laptop stand is on HP Sweden so run on google.co.uk part number (or your Swedish). I found the cheapest on us amazon for $38 or £42.

• "If the corrupted hard drive will be the OS can be installed again"

  "If the corrupted hard drive will be the OS can be installed again"

  If the hard drive has minimal corruption in localized areas, you can reinstall Windows.  You will need to reformat the hard drive, however.  When you get to step in the installation process where it formats the hard drive, do not choose "quick" format  On the contrary, let him do a full format.

  HTH,
  JW