I can't defragment my hard drive, even though I cancelled the chkdsk command.

Whenever I have try to defragment my HARD drive, I get the Error Message: Disk Defragmenter has detected that Chkdsk is scheduled to run on this volume (c). Please run Chkdsk/f. I ran, canceled regular for the C: drive, but I still get the same error message whenever I try to run Disk Defragmenter. What else should I do to fix this?

When you try to defragment a volume of that Disk Defragmenter reports:

Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
 
Please run Chkdsk /f.

This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

You won't be able to defragment the volume until the dirty bit has been removed.

This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

Entry of commands to reset or erase a disc awaiting review is therefore a waste of time - that is not the problem.

A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

You can check the status of your bit of impurity from a command prompt window.

To do this, click Start, run and enter in the box:

cmd

Click OK to open a command prompt window.

For example, to query the bit of impurity on drive C, type:

fsutil dirty query C:

The sample output:
Volume c is dirty
Volume C: is dirty

Is the volume of your sale or it is not dirty?

You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p).  You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.

You also won't solve this problem by editing your registry database - not where is the problem.

Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.

If you need help in doing this, I'm sure a technical support engineer can tell you how, and if not, I'll give you instructions.

Tags: Windows

Similar Questions

  • Can not defragment my hard drive, stuck at 18%

    Original title: defragment my hard drive.

    Hello, I am running windows 7 pro and cannot defragment my hard drive. He had the same percentage on it seems like forever. 18%.

    my laptop is a few years old and was never Defrag. can someone help me please. Thank you

    Disk cleanup has little benefit unless the disc is more than 50% full.  It's rare.  The vast majority use somewhere around 25% of their disk capacity.  The value of defragmentation is improved performance and rarely has real value by returning more useful disk space.  If the drive is only complete, it is likely to be slow performance and may not even have enough space to perform the defragmentation.

    You want MORE not fewer restore points.  This gives you the best choice when things go wrong.  Here's what I recommend on this subject:

    Restore points

    The amount allocated to the point area by restoration by default in Windows 7 is 3% of the capacity of the disk.  In almost all cases, the computer uses but a small part of the available space.  This makes it very convenient to raise that 3% to say 8-10%.  This strategy will give a lot more restore points that will give you much more flexibility to recover a bad situation.

    To change the award, type create in the text box above the start planet.  Select create a restore point.  Click set up.  Move the slider to the right as you see fit.  Definition it to 50 gigabytes will have no effect if you have a 500 GB drive and use only about 100 or so, which is very typical.

  • How can I defragment my hard drive.

    I tried to defrag my hard drive, only showing readers are D, recovery and system:

    D: is 6% recovery is 0% and the system is 24%

    When I click on defrag stay above the same percentages.

    After running Chdsk my C drive appeared I then ran defrag on my C drive.

    Computer works a lot better now.

  • If I bought a new internal hard drive, can I transfer windows hard drive fom that came from the computer to the new, or do I have to buy another software package full of windows?

    What should I do to get windows vista on the new hard drive on the old, because I would like to upgrade to windows 7 since vista when I transferred transversely to the new.

    Your license of Vista will be OK to reinstall it on a hard drive replacement on the same computer.

    Hard disk manufacturers provide normally cloning software to do what you want to do.

    Look at your new Hard Drive manufacturer's Web site.

    Or there are 3rd Party software (cost the same money if): http://www.acronis.com.au/homecomputing/products/trueimage/

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have one still supported for microsoft xbox live even though I cancelled the account 2 years ago. How can I stop taking them my money?

    My son set up the account as soon as he bought the x - box (with my permission, of course) > however, he sold his x - box almost 2 years ago

    and duly cancelled the account > monthly payments (6.99) continued to be debited to my account, until he cancelled the account once again.
    then payments stopped... for a while, maybe 4 or 5 months, then 4 months, I've noticed on my bank statements the 6.99 is being charged
    Once again, and despite all the efforts that my son and myself have done to contact someone about this, the problem remains, each month, in that they are plunging
    my account and steal my money!   It's fraud!   If anyone else has experienced this?   What can we do about it?
    Any help or info appreciated
    k

    Hello

    Answers has no influence on the XBox or XBox Live must
    contact with them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I can't defragment my hard drive

    Usual procedure my compurer, right click on the drive C, properties, defragment now.

    No joy. Message "program not installed."

    How can I install the program missing?

    Thank you, Peter

    Or... If you do not and cannot borrow the right type of Windows XP installation CD, but you do not have a spare part $40, buy Diskeeper 2011 (there is a free 30 day trial full version).

  • Tecra S3 XP Setup not find HARD drive even if the RAID drivers were included by F6 key

    I tried to install a normal XP (not recovery). But the installation program will not find my HARD drive even if I include the Toshiba RAID via F6 drivers.

    Any ideas?

    > I have decided to use nLite and added the raid driver but after several installations different combo, I'm done with the original problem which does not recognize my floppy USB drive after format

    If you have included the RAID driver using the nLite so I put t understand why you need the external USB floppy drive?
    Anyway, to my knowledge, not all USB FDD drives are compatible and it can happen that a non supported USB FDD drive will not recognize and so you would not be able to install the RAID floppy driver!

    But nLite is the key! Using the nLite you n t need the USB FDD drive!

  • You can use an external hard drive with the Mac Mini?

    I've seen videos that say that we cannot increase the ram on a min of Mac, but I'm curious if this works like an ordinary computer, if we can attach an external hard drive to store some of the memory to free up space. Sorry if this is something stupid just need to know what I can do with it.

    You can use an external hard drive to boot and run with any Mac. Its not going to improve or replace your ram. If you use a mechanical hard drive in any Mac then help and boot from an external drive, especially if it's a SSD will be significantly faster.

  • Try to defragment my hard drive C:

    I'm unable to defragment my hard drive.  I get the following error message...

    DSK2_VOL1 (c) was interrupted due to inconsistancies that were detected in the file system.  Please run CHKDSK or SCANDISK to repair these inconsistancies on DSK2_VOL1 (c), and then run Disk Defragmenter.

    I have run CHKDSK, which ends, but still get this error even when I repeat, defragmentation.

    Can anyone help?

    I'm unable to defragment my hard drive.  I get the following error message...

    DSK2_VOL1 (c) was interrupted due to inconsistancies that were detected in the file system.  Please run CHKDSK or SCANDISK to repair these inconsistancies on DSK2_VOL1 (c), and then run Disk Defragmenter.

    I have run CHKDSK, which ends, but still get this error even when I repeat, defragmentation.

    Can anyone help?

    What version of Windows, including the service pack is installed?

    How do you run chkdsk?

    Do this way:

    Start > run > chkdsk /f > OK

    Unless you did something unusual, drive C is your system drive, so after clicking on OK, a command prompt window will appear with the following query:

    The type of the file system is NTFS.
    Cannot lock the current drive.

    Chkdsk cannot run because the volume is in use by another
    process.  You want to schedule this volume to be
    check the next time the system restarts? (Y/N)

    Y type

    Restart your computer and let chkdsk to run to completion.

    When you start Windows when chkdsk is complete, start Event Viewer (start > run > eventvwr > OK)

    Click on 'Request' in the left pane and look for an entry in the pane on the right with the Winlogon "Description."  Double-click on this entry to view chkdsk results.  Click the "Copy" icon (right underneath the up/down arrows) and then paste the chkdsk log in your response here.

  • Pavilion x 2 10-n100na: can I add a hard drive from a HP Pavilion x 2 10-n100na?

    Can I add a hard drive to a Pavilion x 2 10-n100na? I noticed that some models in this range, for example. the Pavilion x 2 10-n107na, have a 1 TB drive. These 2 machines appear identical on the outside, so I was wondering if the 10 - 100na has all the required internal connections such as I could slot in my own hard drive.

    All answers gratefully received. Thank you.

    @Huffer

    I noticed that the manual indicates that it is for some models only, but unfortunately there is not any information about who they are.

    I have to disagree with you and say no.

    You cannot add a disk hard unless your x 2 is one of the special types.

    In the manual, you'll notice that even the keyboard, the coverage and the closing of the bottom are different. Take a very close look at this manual.

  • Windows XP will not allow me to defrag my hard drive, said to run Checkdisk

    I cannot defragment my hard drive using Windows xp.  He told me to run checkdisk next time I start up, I say yes but chkdsk / x or chkdsk/f does not work how can I force windows to disassemble.  Thank you

    Thanks for answering my question. It turns out that Norton utilities was not allowing me to defragment my disk hard because he said that I had to run checkdisk. After you have uninstalled Norton - windows enabled me to perform the disk check and corrected some errors which allowed me to defragment the hard drive. Thanks for your help. = A0 = A0 Bob

  • How do I "Defrag" my hard drive - Dell XPS 8900?

    I heard that it is good to defragment your hard drive, especially for the ouv of flight that I use my machine for.

    But my machine has a SSD for powered by a normal hard disk - caching and normal defrag utility will not let you to this "hidden" traditional disc

    Is it possible to defragment my real behind the scenes hard drive safely?

    Thank you

    Steve

    You specify the drive when you run defrag?

    Try to run the defragmentation from a CMD window. At the prompt, type first to:

    Defrag C: - one

    Press

    This will give a report on how fragmented the drive is. If you decide that he needs to defragment, typeRegeditdans;

    Defrag C:

    Press

    And you can type in defrag C: /? to see a list of all the "available switches" available for defragmentation.

  • Task Scheduler service fails, so I am unable to defragment my hard drive.

    original title: Task Scheduler service does not start

    OK, I have some stability issues with my new win 7 OS and I want to remedy. to do this, I would like to solve any potential problems which can cause my system crashes.

    I check the logs and noticed that the Task Scheduler service is not running. for newspapers of sistem registry errors and i cannot defragment my hard drive.

    So how do you start the Task Scheduler service? When I press the Start button service, I get an error. This is a perforated Cap.

    http://I27.Tinypic.com/2rp4mm8.PNG

    Try to do a repair installation;
    1. Insert the DVD of Windows 7
    2. restart your computer
    3. When asked if you want to boot from your DVD player, do it.
    4. Select your language, click Next.
    5. click on "repair your computer".
    6. Select the operating system you want to repair.
    Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

    I don't have the possibility to repair the operating system or select one as you suggested in step 6. I have and here is a picture of the dialog box http://www.sevenforums.com/attachments/tutorials/1010d1227511616-startup-repair-repair.jpg

    EDIT: Here is the solution I found: http://social.technet.microsoft.com/Forums/en-US/itprovistasp/thread/0c438376-1486-4ae4-9847-2de7a8767f27

  • How can I uninstall Sierra &amp; return to El Capitan without an external hard drive or equivalent required by the instructions online?

    How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online? I find too many misadventures and not happy.

    Hello

    Check out this useful tutorial: https://www.igeeksblog.com/how-to-downgrade-macos-sierra-to-mac-os-x-el-capitan/

  • I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

Maybe you are looking for

  • Safari - the third party extensions installation is not possible

    Hello community, Since the update to Mac OS X El Capitan 10.11.3 I am unable to install Safari extensions from third parties (like Agilebits 1Password or ublock). I can double click on the extension and the weather of dialogue I trust the source appe

  • IOS 9.2 GPS problems

    iPhone 5 s iOS 9.2 Error of GPS tracking As soon as I upgraded to ios 9.2 last week, I noticed that all my Apps of the map had trouble pointing to my exact GPS location, either Waze, Google Maps, or even the default Apple's maps. I can't find a solut

  • Cannot enter BIOS mode

    1. type of computer - ENVY HP dv7-7250nr 2 opporating 8 64-bit windows system Recently, I received this computer. It is amazing that the only thing that could use a change is the keyboard. I got this as a gaming PC, but the function keys can be acces

  • Computer past BLACK. __

    In normal mode, safe mode, the screen becomes black after the startup password is accepted.  In safe mode, the screen is black with 'safe mode', written in the four corners.  No response to key, but the mouse moves correctly. Using a boot disk causes

  • Java.util.Regex

    Hi all Can I use the java.util.regx of java in blackberry. Or I have to use the third-party evaluation library regular expressiong? Please someone answer but soon... Concerning