can I assign vCPU 32 if the physical host is to have 20 hearts that hyperthreading is disabled

Similar Questions

• Monitor the physical host computers

  How to control the physical hosts with vFoglight 6.6?

  The cartridge of the infrastructure offers you the ability to monitor the physical host computers

  http://eDOCS.quest.com/vFoglight/66/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?href=cartridge/InfrastructureCartridge/index.php

  The process of creating agents and add hosts can be seen here

  http://eDOCS.quest.com/vFoglight/66/doc/cartridge/InfrastructureCartridge/UsingTheCartridge.02.3.php#416085

  Golan Shem-Tov

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• Adobe starter edition has the photo of the image as DSCO0283 number. JPG, where can I find this number on the photos in PHOTOSHOP ELEMENTS 12 - reason being that photoshop elements will not convert my catalogue in version 12. If I had this number I neck

  Adobe starter edition has the photo of the image as DSCO0283 number. JPG, where can I find this number on the photos in PHOTOSHOP ELEMENTS 12 - reason being that photoshop elements will not convert my catalogue in version 12. If I had this number that I could manually reconstruct that my collections in photoshop 12 items, but everything I see in photoshop elements is dates and I have several images from the same dates. Help! I have

  Hello

  If you look at the thumbnails in the Organizer, try going into the menu display and check that the Details and file names are checked. The name of the file and the date must appear below each thumbnail. If they do not appear, you may need to increase the size of the thumbnail using the slider to zoom (lower-right).

  Good luck

  Brian

• I can't find my order in the order history, but I have my serial number. How can I download cs6?

  I can't find my order in the order history, but I have my serial number. How can I download cs6?

  Download the trial version and activate it with your serial number

  http://www.Adobe.com/go/trydesignwebpremium

• Have the new DC Acrobat. Have a document that must be turned. All instructions result in a circle to nowhere.

  Guess I'm a novice at this.  Previous player was simple.  Now have the DC of Acrobat. Have a document that was parsed backwards and need to turn. If I click on tools as suggested I thought to go to organize pages.  When I do and you click it just me to a page where I can subscribe for $15 per month.  In looking at Q & unchanged stated that this program is free.  I want to just turn the page!

  If you want to rotate the pages in the PDF file for good (to save it with a correct orientation), you will need to purchase Acrobat.

  If you don't want to turn the pages for viewing, you can rotate using Ctrl-Shift + sign more on Windows, or by clicking on the page, by selecting rotate in a clockwise direction. You can also enable the elements of the toolbar rotation by clicking on the toolbar and selecting the page viewing tools.

• Mistakingly, I put a copy of xp family on my slave instead of master disc drive. On the master drive, I now have a folder that is 25 concerts, which doesn't let me delete or format the drive either.

  Original title: I mistakingly put a copy of xp family on my slave instead of master disc drive.
  Perhaps I will learn one day someone ask first.

  Mistakingly, I put a copy of xp family on my slave instead of master disc drive.  And if this wasn't enough, so I thought it would be easier to remove the program on the master drive and keep the slave for program files and the master for the storage of the doc, movies. etc.  Probrably you know there not well turm.  On the master drive, I now have a folder that is 25 concerts, which doesn't let me delete or format the drive either.  Any suggestions?

  Hello

  1. what exactly happens when you try to delete the folder that is located on the master drive? You receive an error message?
  2. What is this folder?
  3. what happens when you try to format the master drive? You receive an error message?

  After return the correct error if you receive one.

  If you want to than Windows XP on the master drive only then change the slave to the master disc or install XP on the master drive.
  To change the master or the slave settings contact the hard drive manufacturer or consult the manual of hard drive.

  Reference:

  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• Can I assign a picture for the account invited on the login screen?

  Can I assign an image / picture to a guest on the login screen account?

  SystemPreferences-> users & groups-> left panel, turn on the guest account (if necessary open settings), then "allow the guests to connect to this computer", and select your preferences in the LoginOptions.

• How can I assign a Ctrl to the Microsoft Sidewinder X 4 macro keys?

  I have a Microsoft Sidewinder X 4 on which I want to assign an additional on S1 Ctrl while I won't have to reach all the way to the left Ctrl key during playback.

  When you use the macro editor, however, I can only assign it as a real action after pressing the Ctrl key and not as a key 'extra' so to speak. Do I want to say, when recording Ctrl as a macro on the S1 and then use it, what happens is Ctrl is pressed and released the macro is played. What I want to do is to act as an additional Ctrl and does not play a macro.

  See you soon

  Hello

  Thanks for the quick response.

  I suggest you to go through the steps mentioned in the article mentioned below and check:

  How to redirect to my keyboard access keys?

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/keyboard/reassign-keys

  If this is not enough, you can contact the hardware support for help on the same.

• RDM to the physical host

  Hello

  Is it possible to move RDM Server physical disk view we do not have snapshot ave anything... and it's physical fashion... It will detect as forien drive in destination OS?

  Yes, it is possible. You should be fine here, but which OS are you using with the WDR and what is the operating system on the physical server? You can also take advantage of the SAN snapshots to protect during the failover. And this caution as always with these operations - make sure you have a good backup.

• DHCP server virtualized inaccessible by the physical host computers

  Hello.

  I set up a DHCP under VMware Server 2. It is accessible by the virtual machines on the same host, but not by physical machines on the network. They can ping its IP address, but do receive any DHCP offer at the start of it. Are there additional configurations that I have to look?  The VMware networking is configured in bridged mode.

  Thank you.

  Alinpastrama,

  What is the host operating system?

  Do you have any software firewall on the host?

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Can access virtual servers, but not the server host after vpn

  When on the network, I can access the host server and all other virtual servers (virtualized with virtualbox). But when I connect with VPN I have no access to the main server, but I have access to any of the host servers - and I can get access to the main server of one of the host servers.

  Where do I start looking?

  using of 5505 and asa version 8.4 is (2).

  The nat setup is like this:

  3 (inside) (outside) static source any any static destination NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 non-proxy-arp-search to itinerary

  translate_hits = 0, untranslate_hits = 0

  4 (inside) (outside) static source any any static destination NETWORK_OBJ_192.168.1.128_27 NETWORK_OBJ_192.168.1.128_27 non-proxy-arp-search to itinerary

  translate_hits = 0, untranslate_hits = 0

  5 (inside) (outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.254.0_28 NETWORK_OBJ_192.168.254.0_28 non-proxy-arp-search of route static destination

  translate_hits = 37, untranslate_hits = 63771

  6 (on the outside) to dynamic interface of the NET-VPNPOOL source (outdoor)

  translate_hits = 0, untranslate_hits = 0

  On the host, I see that you have 2 default gateways configured. It can have 1 default gateway, and to the other interface, you must configure static routes for specific access.

  The interface that needs to connect to the Internet should have the configured default gateway. The traffic that pass through the interface of the SAA should also go in and out the same set of interface, IE: If the host server connects to the interface via dmz out to the external interface, the return traffic must also go through this path, apart from the interface and return to the dmz interface.

• Can I add page numbers to the entire document once I have the combine in pdf format?

  Can I add page numbers to the entire pdf document when combined?

  Hi gjanowiec,

  You can add page numbers to PDF using Acrobat. See https://acrobatusers.com/tutorials/how-do-i-add-page-numbers-at-the-bottom-of-my-pages for more information. If you do not have Acrobat, we invite you to try free for 30 days (www.adobe.com/products/acrobat.html).

  Please let us know if you have any additional questions.

  Best,

  Sara