can I buy a package of several points of access to both?
I'm looking all cool APS available since the adobes for photo stores and everything in between, they would all come in handy for work including, but not limited to the YEAR and Pr, how to find the best possible deal for the aps as much as possible?
Thank you!
Cloud Plans https://creative.adobe.com/plans and look on the page to see what is available
Tags: Adobe
Similar Questions
-
Several points of access Cisco Aironet 1131AG and same SSID?
We have several Cisco Aironet 1131AG, all wired devices on a switch (2560) Cisco L2 which is connected to the L3 switch (3550). We have assigned a VLAN for access point to the L3 switch which acts as a vtp Server (L2 switch is vtp client). All the ap will have a static ip address and all will have the same SSID and no security, and they will use several channels (e.g. 1,6,11). They will work in 3 floors for a roaming wireless client. We not using any wireless controller.
So my question is this: how to configure the same APs-all with a different ip address, can we use L3 switch to create the dhcp server to access points VLAN (pool for guests) and the rest of the static ip address for the ap? One of the ap can be WDS and on the same radius server local time with users without Cisco Secure ACS or similar controller or I did not understand this very well :-). I followed the guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32roamg.html for WDS where Abu Cisco ACS part is a problem, so I can use the same ap as a Local authenticator as a guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_4_JA/configuration/guide/s34local.html#wp1035723.
Thank you very much...
Well, just so you know, WDS, and local RADIUS authentication is necessary only if you use authentication on your wireless connection. You say that you do not plan to use security, so it's not necessary. However, I highly recommend at least using a simple WPA2-PSK to lock your connection, otherwise you might end up giving free Internet access at best and at worst you could give access to the computers and corporate servers. If you want to reuse a 802. 1 x or WPA authentication method, then Yes, you can use an AP as RADIUS and to improve WDS Server authenticated to roaming, but this is much more limited than the use of a Cisco ACS.
As for your other questions, Yes, your APs can all be configured the same except for at least three settings: IP address, hostname, and channel. Configure your static IP addresses on the interface of the PA BVI1. Do not place it on the Radio or Ethernet interfaces, because if one of these interfaces goes down, you lose the ability to configure the AP, so it's best to use the BVI1 interface.
And Yes, configure a DHCP scope for your customers on your L3 switch is good design, or you can also use your DHCP server on a different subnet by using the command of support-ip address on the interface of L3. I hope this helps! Let me know if you need help to set all this up.
Merry Christmas!
Jeff
-
Several points of access WAP300N just stop working
I have 3 WAP300Ns in my office, all with the same SID. They will work for several days, then stop working - will not respond to the ping, etc. I do not think that all fail at the same time, but seems it tends to be in a group. (I know they are all 3 down when I can't get Wifi) Turn off and turn on again gets working them again. All have the latest firmware. I tried different frequencies but doesn't seem to help. Very frustrating. Any suggestions?
Lets see what are the results of a disabling WPS.
-
Divide a line into several points
I see that I can use SDO_LRS. SPLIT_GEOM_SEGMENT to divide a line into one only point (and get 2 lines resulting).
However, someone at - it an idea how can I split a line, at several points, in several segments? I need to do for the number of lines, so a function or procedure would be nice as appropriate.
Thank you
Published by: ronnie-m on April 22, 2013 04:43Sorry for pasting quick and dirty, was a minimum on time and problems with my dev env.
Perhaps still not the best outline but hoping there more explanaition should be ok.
Concerning
Luke
select l.line_id, -- line line_id ROW_NUMBER() OVER (PARTITION BY l.line_id order by l.rowid ) -- optional sub id, to make submains unique in combination with line_id (guess this will be ordered sdo_lrs.CLIP_GEOM_SEGMENT(SDO_LRS.CONVERT_TO_LRS_GEOM(l.geometry ), branch_measure, branch_next_measure, 0.05) -- actual clipping, needs convert to LRS apparently, start end end branch measure from line l, -- rejoin mainly to get the geometry again ( select line_id, -- line_id branch_measure, -- measure of the branches (from CASE WHEN LEAD(branch_measure, 1, 0) OVER (PARTITION BY line_id order by branch_measure) branch_next_measure -- Analytical function LEAD will get the next branch measure form the following ordered records per line_id from ( select a.line_id, -- line_id CASE when -- CASE (assuming branch will touch only at one point) it will be either the start or the endpoint sdo_lrs.find_offset( -- of the branch that will TOUCH, we are checking this based on the offset which one is closest SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), -- requires convert to LRS geom sdo_lrs.geom_segment_start_pt(b.geometry), -- if it is neccessary to deal with multiple possibilities we might better use a temp table to evalute better 0.05 -- TOLERANCE (all tolereance should be seen with respect to resolution of the data ) -- IF feasible, let spatial take care of the snapping < sdo_lrs.find_offset( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_end_pt(b.geometry), 0.05 ) THEN sdo_lrs.find_measure( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_start_pt(b.geometry), 0.05 ) ELSE sdo_lrs.find_measure( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_end_pt(b.geometry), 0.05) END branch_measure from line a, line b -- self join using main and branch that touches WHERE sdo_relate(b.geometry, a.geometry, 'mask=TOUCH') = 'TRUE' -- Should be replaceable with sdo_join + self join optimsation AND a.line_type = 'main' AND b.line_type = 'branch' union all -- union all to get the 0 measure (startpoint) in the subquery as the beginning of the first clipping segment select line_id, 0 as branch_measure from line union all -- union all to get the last measure (endpoint) in the subquery as the beginning of the first clipping segment select line_id, sdo_geom.sdo_length(geometry, 0.05) as branch_measure -- maybe better to use actual get measure form lrs endpoint but is the same if no spaecial measure are used from line ) ) b where branch_measure < branch_next_measure -- avoid duplicates (2 branches at same location on main (but also the last + 1 segment with last measure and default value 0 from LEAD and l.line_id = b.line_id -- join on line-id to reuse the geom (or potential other attributes from original lines ; -
I am looking to buy the package of photography and I have 2 PC at home - can I install this on multiple devices?
Yes, you can install all software from Adobe on 2 computers which are mainly used by the same person but not both computers at the same time.
This allows you to install on your desktop for work from home / office and a laptop when away from your home/office. But you cannot use LR and PS on both computers at the same time.
-
Can you have multiple packages in a source code file, or you have several files?
Can you have multiple packages in a source code file, or you have several files?
ExampleClass must be saved in a directory as well as your main fla.
This directory must have a subdirectory named samples containing SampleCode.
-
I tried several times also can not cancel the package Dreamweaver CC.
I tried several times also can not cancel the package Dreamweaver CC.
Can I try all thinking to cancel the service plan CC Dreamweaver?
Contact customer service.
-
Hi, I do not know why the moment I try to buy a package of software for my business, I can't go any further because I can't select my country (ITALY-EURO) COSTA RICA control value is selected automatically. I need help. A lot of satisfaction
Contact Adobe Support when available (usually not weekends)...
Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN ) -
Can I buy subscription only Photoshop app and then reload with subscription only application illustrator? It is less expensive than the full package. Is it possible?
It is better to buy the subscription of photography cloud creative and unique Illustrator App subscription
$9.99 + $19.99
Yes, you can buy according to your choice.
https://creative.Adobe.com/plans
Photoshop + bright room and Illustrator
.
-
I am interested in buying the package of Photoshop, and Lightroom (9.99 per month) my question is if I download on my PC can I also use it on my iMac, or vice versa?
With the subscription, Yes, you can have it on PC and Mac.
-
What support to wait without having to buy a package of support for laptop?
I bought a HP Envy 360 (with core i7) laptop as a gift for my son at Best Buy. It will be able to call with a question to the initial assistance? The standard warranty cover this? Or do I have to buy a package of support for this?
He had a HP laptop with Win 7 is so not a total newbie. There are a few reasonable access to tech friends.
Other suggestions of things to say about the support available? I will mention this forum of course.
Lsbcal wrote:
I bought a HP Envy 360 (with core i7) laptop as a gift for my son at Best Buy. It will be able to call with a question to the initial assistance? The standard warranty cover this? Or do I have to buy a package of support for this?
He had a HP laptop with Win 7 is so not a total newbie. There are a few reasonable access to tech friends.
Other suggestions of things to say about the support available? I will mention this forum of course.
It comes with a 1 year limited warranty, which means that it can contact HP for support at any time by email, chat or phone. It has a warranty on the material that covers defects of the factory and the failures of natural material, but it does not cover accidental damage. At any time during the warranty period, you can upgrade the warranty to cover accidental damage or extend for several years by calling 1-800-474-6836.
-
How can I buy a book on my iPhone and the gift for a grandchild
How can I buy a book on my iPhone and the gift for a grandchild
Use the iBooks from iPad/iPhone app.
1. Select the book you want on the iBook Store send as a gift (Note: recipient must be in the same country)
2. tap on the Rectangle with an arrow pointing to the top (at the top right or next to the title)
3. press on the gift icon, enter a few messages and send.
-
Can't BUY iPhoto book - Error Message "incomplete book." Problem with the theme "photojournalism"?
The use of iPhoto 11 on Mac OS X
Problem - can not BUY iPhoto book
Error message - 'Incomplete book'... images on one or more pages contain no pictures
WORKFLOW
Choose the theme - 'Photo Story' / connected / large
Create the Layout - Standard 20 pages of Photos and text
Overview of TEST Version 1 - Export PDF OK - OK - BUY OK
Create the duplicate - save to Version 2 - Triangles of yellow lights appear on all pages!
Version 2 - OK - OK Preview - PDF Export BUY FAIL - same mistake
Create copies - Save to Version 3 - Reload Photos/text/background on all pages until each yellow warning Triangle disappears
Version of TEST 3 - export to PDF OK - OK Preview - BUY still FAILS - same mistake
Create the duplicate - except for Version 4 - everything looks good - Triangles of yellow signaling No.
Trial 4 - export to PDF OK - OK Preview - BUY still FAILS - same mistake
RETEST Version 1 - export to PDF OK - OK Preview - buy always OK
Search and read help files, Support from Apple, cat competent bodies and try the suggestions - many people have struggled with similar issues.
Eventually repair and then rebuild the iPhoto Library - everything seems fine.
TEST Version 1 new - BUY always OK. All other Versions - BUY still does NOT work
Create duplicates - save to Version 5 - try to change the theme to 'photo book '.
TEST Version 5 Overview - Export PDF OK - OK - OK NOW!
BUT - all completely scrambled and useless page layouts
"Photojournalism" is the only theme that works well for this Album
Version 1 cannot be used because all the pictures/text/Layouts are now improved
2 days wasted trying to buy a book in iPhoto from Apple...
At least I have a good PDF of Version 4 I can take for local printing
IT OF JUST A BUG? IS THERE A SOLUTION? -IS THE NEW APPLICATION 'PHOTOS' ANY BETTER?
You can buy is more books of photos with iPHoto (or opening) - Apple dropped that service 03/31/2016
You must use Photos or a third party - PrestoPhotos States that they can print and above all of the positive comments on the results in the opening forum - I don't personally used them
And the error you are getting is not wrong - you have not one or several photos missing in your book - usually a background picture full page covered by another photo, so you don't notice it
and you don't say how you are seen, but it's the way recommended - Preview of a project on paper in Photos or iPhoto to avoid problems - Apple Support
LN
-
HP3050: HP3050 WHERE CAN I BUY THE TRAY PAPER
Bought a 3050 opportunity and it lacks the folding? extension of the paper tray? where can I buy a replacement?
And or is it still really necessary if I do only a few pages at a time?
Thanks in advance!
Hi @ih8HTC
Sorry to hear that you are missing that part. This really should be included and you should not have to buy the piece. I recommend to go back to your point of sale and they must replace it for you.
If you don't have a chance, you might try the HP parts store: https://parts.hp.com/hpparts/CountryChoice.aspx?mscssid= & ccode = ZZ & lcode = ZZ
Hope this helps
-
Can I buy an OEM Version of Windows 7 system integrator?
CAN I BUY A WINDOWS OEM SYSTEM BUILDER VERSION 7?
You can buy a version retail or OEM of Windows 7 to selling software online many Web sites.
Here are a couple.
Newegg.com - Microsoft Windows 7 - retail trade and OEM System Builder
Amazon.com - Microsoft OEM System Builder software
NOTE: you should be aware of the following disclaimer before you decide to buy an OEM System Builder version.
Use of this OEM System Builder channel software is subject to the terms of the Microsoft OEM System Builder License. This software is for pre-installation on a new personal computer for resale. This OEM System Builder channel software requires the assembler provide support to the end user for the Windows software and cannot be transferred to another computer after installation. To acquire a software Windows with support from Microsoft, please see our full package offers of products 'Retail '.
Here is a link where you can download the most recent system builders license agreement in any localized language.
Microsoft OEM Partner Center - system manufacturer license agreement
This information is provided so that you can make an informed decision before you buy.
Thank you for using Windows 7 Ronnie Vernon MVP
There is no technical restriction that prevents you from using it, but it is not intended for consumers.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx
There are two types of OEM suppliers. Royalty OEM vendors can distribute Windows products by using the preinstallation (SLP) product keys so that end users can bypass product activations. All other OEM vendors distribute Windows products by using the standard product keys that require the user to activate Windows products.
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GB
Licensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx
Maybe you are looking for
-
error message 6th gen Nano when it is plugged
When I plug my iPod Nano 6th generation in my Windows computer, iTunes opens and displays the following error message: "An iPod has been detected, but cannot be identified correctly. Please disconnect and reconnect the iPod and try again. If the prob
-
I want to get email from icloud for my daughter on my pc
Hello. I am a user of windows 7 that is running Outlook 2016 and icloud for windows for sharing photos. I want to get copies of all emails sent to my son and my daughter. (9 and 12). Is there a way to do this? If not with Outlook with other progr
-
Unable to connect Microsoft Bluetooth Mobile Keyboard 6000 to my PC laptop Toshiba M65-S8092
I could not connect Microsoft Bluetooth Mobile Keyboard 6000 to my M65-S8092 PC Toshiba laptop. The labtop does not recognize the keyboard or numeric keypad. When the keyboard or pad is turned on initially a light solid green lights and the light f
-
I searched this problem and what I read it is that it is either due to a failed attempt to install a driver or a driver designed for an earlier version of Windows. I've never had this problem before, but here are the details. Clean install of XP Sp3
-
Anti virus slowing down my computer
I install Windows 7 on my old XP Pc with Intel Pentium 4 1 GB of ram it works quickly without AntiVirus Microsoft Security essential are too slow then removed I'm a home user suggest a good anti virus Now install the AVG Free version ok It's free I s