Can I change the DPI setting by device

Similar Questions

• Qosmio X 500 - 15F - how can I change the DPI?

  Hello

  With Qosmio X 500 - 15F and graphic card NVIDIA GeForce GTX 460 M

  I use professional software for construction (6.0 matrix based on Rhino 3D 4.0 SR9) jewelry. When it starts, the software asks me to set the DPI at normal.
  How can I change the DPI? I already tried different resolution settings. It does not change the problem.

  Thanks for help

  DPI is the number of pixels per inch of the LCD screen. You can not change this.

  I think that the software needs a specific resolution or the size of the LCD screen. Try lowering the resolution 1280 x 800 or an external monitor.

• My color, setting for LR and PS is ProPhoto RGB. If I want to export my photos and place them on OneDrive or watch on TV of the photo, can I change the color setting in sRGB?

  My color, setting for LR and PS is ProPhoto RGB. If I want to export my photos and place them on OneDrive or watch on TV of the photo, can I change the color setting in sRGB?

  In general, I would recommend sRGB, if images must be consulted on the screens of TV or PC monitors. sRGB is usually the universal profile for sharing photos on the web. If you want to share your images on a single disc, most of the people will see their best, without changes in color, with an sRGB profile.

  So it really depends on your goal. You use a player for sharing and viewing on backup and storage devices.

• ThinkPad Tablet 2 BIOS: I can't change the list of boot devices. Help, please!

  Hello community,

  I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »

  What can I do?

  Kind regards

  The problem is solved!

• How can we change the DPI?

  HOW CAN I CHANGE THE DPI? THE SCREEN IS TOO BIG. IT HAS CHANGED WITHOUT CHANGING.

  Hi Frederic,.

  Please check the following using the question (resolution DPI and screen too although I'm not sure who may be the culprit):

  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  http://www.Vistax64.com/tutorials/84233-DPI-scaling.html

  Note that if you want to say that in a specific program, like IE, it can be {also} separate controls (like in IE, you can check tools > Zoom).

  I hope this helps.

  Good luck!

  Kosh

• Can we change the browser setting in our program?

  Using:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800440/How_To _...

  We can call the brower, but sometimes we need change the browser setting. For example, if the default browser view for the page, not column, can change us in our program?

  Thank you very much.

  No you can't. But you can use the Browserfield:

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/browser/Field2/BrowserField.ht...

  You shoul be able to set all the required parameters:

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/browser/Field2/BrowserFieldCon...

• How can I change the dpi to 600 on a photo?

  I've already saved as a jpg photo, but I'm about to order stickers online. However, the obligation is 600 dpi. I need help to find how to do this. I looked in properties and on the selection of quality under the print menu. Nothing works for me. Help please! Thank you!

  Here's a way to do...

  How to change the DPI of Digital Photos:

  The free software IrfanView can change dpi...

  Open a photo in IrfanView and go... Image / information...

  Enter the resolution you want in the areas of the resolution...
  (type 600 in each area)

  On the left the button change / OK

  According to... to... File / save as... and save
  your photo altered with a new name.
  (choose... JPG - slider to 100% / save)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html
  (Download plugins too)

• How can I change the letter of a device when it is not an option?

  I recently bought a WD My Passport Essential 500 GIG hard, and the problem is, I plugged on an Apple Macbook and added all my Itunes Music on the hard disk.  Then from there I connected on an Asus laptop, running windows XP.  I was wondering why it would not be displayed in my computer. I couldn't find it so I looked in Device Manager and I saw she didn't have a drive letter, I can't change the letter because it is not an option. How can I change the letter when it is not an option, all it says is HELP in option

  Hi kalebramos,

  Here are some articles from Western Digital that will be useful for you.

  Windows is unable to recognize my drive or find the drivers for my hard drive or SSD

  How to connect physically, cut and install a WD external drive in a Windows PC or Mac

  How physically install, adjust the parameters of jumpers and put up a SATA, EIDE, or SSD disk in Windows 7, Vista, XP and 2000

• How can I change the default setting of font size and type when using e-mail?

  When sending an email, I have a default setting of the Arial font to 10 points. If I change what it comes down to Arial next time I use it. I don't know how to change the default setting.

  Hi Robin,

  What e-mail program you are using (name and version)? Windows Mail, Windows Live Mail, Outlook, a program that you access through your browser (and if yes, what name and version of the browser?) something else (and what version and/or year of this product)?

  What Version of Vista you are using (for example, 32-bit Vista Home Premium SP2 or other)?

  Thank you!

  P.S. I am pretty sure that the procedure is simple and can be done-, but it varies depending on whether you use, so I want to provide the information that is applicable to you.

  **********************************************************

  EDIT: Just a few alternatives which may help:

  If Windows Mail, go to Tools / Options / compose / font settings (ditto for fonts Signature if you use signatures) and change it to anything you want.  Save the changes and close Windows Mail, and then reopen it.  Your default sending policy should now be what you set with this configuration.

  ************************

  If Windows Live Mail, this MVP following is courtesy of Michael Santovec,:

  "You use the Windows Live Mail (WLM) installed on your PC or the.
  Hotmail/Live.com Web site?  If in case of doubt, by reading an e-mail message has
  Help (ALT + H).  If the help pop-up menu and the last item will say 'on '.
  Microsoft Windows Live Mail"you use the WLM (2008/2009) program.  If she
  'About Internet Explorer', says, you use the Web site.  If the House of Ribbon
  Select instead of the Help menu, you are probably using the version of WLM 2011.  TO
  check the selection ALT + F, about.

  For questions of Hotmail (Hotmail.com/Live.com/MSN.com), use these forums
  (Including the use of the website of Hotmail and Hotmail account problems)

  http://windowslivehelp.com/product.aspx?ProductID=1

  Set the default font for new messages - only applies to messages in HTML format

  -WLM-2008/2009: tools (ALT + T), Options, dial
  "- WLM 2011: ALT + F, Options, Mail, compose.

• Can I change the default setting of the color of the pen? [iOS]

  Can I change the setting of the color of the pen?

  I open the PDF file on iPad and use the pencil tool like the graph below.

  

  But, I want the black color of the trace in pencil, so I change the color tool as the graphic below.

  
  

  

  I guess that the default settings of the color of the pen is red.

  I want to make the default settings of the color of the black pencil, when I open the file on another iPad.

  Can I change the default settings of the color of the pen?

  Hello

  Yes, the default color of the drawing (pencil) Freehand is red (for the first time).

  But once you change the color of a different color (e.g. black), Acrobat Reader, don't forget your color choice for the particular tool for next time.

  If it works for you?

  Please let us know if you have any additional questions.

• How can I change the port setting?

  Just installed HP Color Laserjet 2550 L on my XP PRO laptop using the USB port.  Properties shows port is configured as DOT4. Printer is recognized as being online, but cannot print. How can I change the configuration of the port?

  Hi JohnNielsen,

  · You receive an error message or error code when you try to print?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Print a test page and check the results.

  Method 2:

  Run the patch from the link below: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  You can also check the links below: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=388394&prodTypeId=18972&objectID=c00775196

  Solve a problem: print: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=388394&prodTypeId=18972&supportTaskId=22980

  With regard to:

  Samhrutha G S - Microsoft technical support.

• where can I change the default setting of the H tags in dreamweaver cc?

  Where can I change the default settings for the html heading tags in Dreamweaver?

  The usual approach is to style yourself in your CSS.  Or use one of the different CSS resets.

  H1, h2, h3, h4, h5 {}

  margin: 0;

  padding: 0;

  }

  H1 {make-size: 175 %}}

  H2 {make-size: 150 %}}

  H3 {make-size: 125 %}}

  H3, h4, h5 {make-size: 110 %}}

  Nancy O.

• How can I change the language setting for 4500 WANT after the initial Setup

  The language setting for the ENVY 4500 e-all-in-one printer has been mistakenly or inadvertently put in CHINESE (not sure how this can happen).  Now, the display is incomprehensible, so I can not understand how to change the language to ENGLISH.  Is there a simple way to change the language or reset the printer by default so that I can fix this problem?

  Thank you.

  Hi scfessler,

  Welcome to the HP Forums.

  I see you have a problem with the printer displayed in another language.

  On the front screen of the printer, press the top left button ( Home button).  Once on the home screen, press the arrow UP 2 times, this brings you to the preferences Menu, press OK.  Once in the Preferences menu, the first highlighted area is the enacted area please just press OK again.  The first language highlight is English, please press OK and then Yes to make the changes.

  If you still have questions, please let me know.

  Thanks for your time.

  See you soon,.

• How can I change the default setting in Outlook Express?

  I'm not under Explorer anymore and when I try to click on a link in an e-mail message by using Outlook Express, he tries to throw in Solution Explorer. How can I change this?

  Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Choose a default browser. Select the option for the browser you are using.

• I can't change the DPI scale because the area to apply it is not visible.

  I recently changed my DPI scaling to larger text and cannot change because the area apply is not visible.

  Try pressing the ENTER key to do the job.

  And read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

  See you soon. Mick Murphy - Microsoft partner