AirPlay always loses connection after 1 minute of game

Similar Questions

• HP x4000b mouse - lose connection every few minutes with the HP Envy 17

  I just got a laptop Envy windowns 8.1 and the bluetooth mouse HP x4000b. The mouse lose connection every few minutes, (no connection with the bluetooth in the computer)

  Do you think is the problem of the computer (bluetooth) or the mouse?

  Hi elistephanie,

  I regret that, after exchanges of the mouse, you always have this difficulty.

  As you did on the original mouse troubleshooting and switch the mouse makes no difference, I suggest contacting HP support for further assistance.

  Please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number Plan of the Technical Support site .

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• OfficeJet 6968: Officejet 6968 loses connectivity after sleep

  OfficeJet 6968: easy to undertake together upwards more wireless, then it totally fails when energy saver or sleep mode is used (what's it called depends on whether you are looking at the screen of the machine or its settings via a computer). This has been a very difficult and aggravating problem, because it makes you think that everything is connected and is doing so well. Then, suddenly, nothing connects more - not the computer, not an ipad, no access to assistance from the IP address of devices, etc. - which works perfectly a single minute there!  Tried a different printer (started with a 6978) and have the same problem, so it is either something in the software or an incompatibility with my wireless set up.

  After searching for hours through the forum and seeing other problems with sleep/energy saver, followed the problem down to the sleep/wake. Modification of the duration of sleep for 5 to 10 minutes moved the problem of connectivity to 10 minutes.

  6968 actually stopped in the middle of an active print job. Just left. 12 pages for a job of 24 pages. Restarted printer and it has taken over part of the work.  Apparently sleep energy saver does not care if it is actually used. Same problem, try to load the software on the computer. About 5 minutes in the Setup routine, when comes the sales pitch for the service of the ink, the computer displays that it loses the connection with the printer. So much for the implementation.

  An aggravating role through all of this, is that the screen of the printer says it is connected to the network. Gives no sign of problems. He sleeps screen darkens, you press a button to wake up and then it signals that all is well. Blue network light solid. The specified IP address. Thin connection. Apparently not, as no computers or phones or Ipads can see it... shows as disconnected in the devices in the computer. And the journal of router sees cut right to the 5 minute mark (or 10 when the value for that) almost to the second!

  Access its settings through its IP address, tried to update the software and guess what... hit the 5 minute mark and he has even stopped the update process. So apparently this timer sleep-saving energy company outweighs everything else what is the printer.  Incredible.

  Abandoned the wireless for a cable to the old (luckily I had one, because apparently the cables, printed instruction manuals and the owners are too outdated these days for HP technology). Turn off the radio. print a test very well. Waited for the printer screen to go black, indicating "standby" mode. Tried to print close to success when the printer on, then he sat down and gave the blue circle of frustration... "Printing"... 'Printing'... posted for almost 5 minutes... then 'Cancel'... fed with a blank page, whirred and leading in-house for a minute, then fed a page with strips that looked like smeared barcode. So about 10 minutes in a revival completely fail - and this with a CABLE not my wireless, has if clearly it has a sleep problem in the HP software. Perhaps the ultimate energy saver?  After all this he printed a test very well - however, after a wake upward, wasted paper and ink failure and not forgetting the 10 minutes. To print a single word: 'TEST '.

  Unfortunately, there seems to be no way to completely disable mode 'sleep'. Heck, it would be better to just completely turn the thing, as the time to roll a reboot is much less than the time to wake up and move to a successful impression, but the off timer is the order of the hours is no help. Certainly, it would be a really poor solution for a printer whose main selling point is a wireless connectivity for multiple devices!

  All I wanted to do 3 weeks ago was replace a dead Canon printer. Worst experience HP I had in the 1930s. Thus, HP. Any other ideas? Just somehow disable this sleep BS?

  Number of brand and model of the router?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer that ' Auto Off/sleep/power saving mode ' is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server in the printer.
  5. Wireless printers work on the band Wireless 2.4 Ghz not the band 5.0 Ghz.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit.  Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 5 feet independently of each other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES (Personal-PSK) encryption, but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Always make sure your router is on the latest firmware.
  8. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  9. Marketing the printer and check that it reconnects to the router.

  Microsoft has announced an update of Windows for the detection of device address... mode devices .waking 'sleep'. Update your Windows 10.

  https://support.Microsoft.com/en-us/KB/3147458

  If you have Windows 7/8/8.1 discovery network is on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now the last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php .  Use a powerful scanner at the end and remove all registry entries.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• VM loses connectivity after a reboot... help!

  I'm lost on this one, I've NEVER seen this problem before.

  The server is an HP DL380 G5 with two 1 GB network adapters. Running ESXi 5.0 (with all updates) one comes from ISP and we're going on the local network (server is mail, NAT and much more).

  After a reboot, the NETWORK card that comes from the ISP, loses connectivity, more often. It will be the Web sites (I guess that's the port open on the firewall) but nothing else. No internet, no. DNS, I can't even ping an external site by its IP. The only thing that works is the Web sites that are currently running. We use this connection for Web sites and Internet for the site so using NAT gives him around our PC, it is important that it works.

  The ONLY way to recover is to remove TWO cards from the network card in Windows and let Windows find their new (drivers). I got this server and copied down to older hardware, and never, it has a problem after a reboot and works with a number. On ESXi 5, even after fixation by the removal of the NETWORK adapter cards, once it gets restarted, I have to start all over again.

  I need to pass to the virtual machine, but so far it has been nothing but a nightmare.

  It is material or ESX that causes this problem, I don't know it's not on Windows server 2003 that they run...

  Any ideas? Please help if you can.

  The problem seems to be what I was suspecting, a routing problem internal VM. I thought you lost the 0.0.0.0 route to the internet, but instead, you actually get an another 0.0.0.0 route that points to the local interface. The route print output:

  Work:

  0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

  Does not:

  0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

  0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.1 10

  192.168.0.1 is the local IP address of the internal NETWORK adapter in your virtual machine. This means that for some reason, sees itself as the default gateway and also not trying to access the internet through your ISP router.

  If you look at the text notworking ipconfig/all command, you will see that the 'card Ethernet Local Area Connection 4' with the 192.168.0.1 IP itself now has as a default gateway.

  The LAN4 configuration is static, so it's quite strange where the new default gateway information comes. A quick fix after a reboot is likely to open the TCP/IP settings and remove the new default gateway of the interal NIC

  You could also enter a new route persistent to the ISP router with the metric is lower, but I think that we should first try to find out why your Windows 2003 establishes a default gateway on the internal interface.

• ENVY 100 D410a: Printer loses connectivity after mode "Eve"

  I have 2 printers, OfficeJet 5746 and Envy 100 D410a and both meet the same problem.  They work very well, then after having been slowed, printing "printer not connected" is displayed.  I did the exercises to unplug the router, remove printers from the list, I checked the ip address and they start with 10.  I have reset the printer.  I went alone on the list of printers (envy) and the problem still persists.  Please, what can I do?

  Use the following link to create yourself a file number.
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection (use officejet info)
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

• my router gateway userse is slow and it's always lose connection when I change my location

  How can I disable my gateway uverse router and use my linksys AC9200 instead of the gateway uverse router

  You must contact your ISP to find out if the ISP's modem is flattened. If this isn't the case, then the use of the DMZ on the ISP modem.

  If the ISP's modem has a built-in router, it is best to fill the modem. Having 2 routers on the same line can cause connection problems: link >http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm if the modem cannot be filled then see if the modem has a DMZ option and enter the IP address of the router gets the modem and put it in the DMZ modems. Disable any WiFi modem from the ISP and filters such as firewalls and other. Also check the routers DHCP IP address may be in conflict with the ISP modem 192.168.1.1 IP address. Check to see if it's the same on the ISP's modem and if the modem cannot be filled, replace the 192.168.0.1 Linksys router ou.0.254.

  Preferred method of connecting with a modem of stand-alone ISP:
  ISP modem > Linksys router<>connected devices.

  Method of connecting with a modem with integrated router which can be filled with ISP:
  ISP (bridged) modem > Linksys router<>connected devices.

  Method of connecting with a modem with integrated router which cannot be cured of ISP:
  ISP modem (DMZ) > routers Linksys IP WAN placed in modems ISP DMZ<>WRT router devices.

  DSL PPPoE configuration:
  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3687

  Set static IP address:
  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3979

  Installation of the cable:
  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3686

• Satellite P500-F12 - freezes after 5 minutes of game

  I recently bought a toshiba laptop P500-12F with the specifications below, the problem I have is that whenever I try to start a game like mount and blade or empire total war, the game works for between 5-10 minutes, but then crashes completely and the cell starts producing a strong buzz. The only way out of this is to press the power button until it stops. I don't get the problem with something else that this type of games and I don't know why it does this, any help or adivce would be welcome.

  Bradders.

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: SATELLITE P500
  BIOS: PhoenixBIOS 4.0 Release 6.1
  Processor: Intel (r) Core (TM) 2 Duo P8700 of CPU 2.53 GHz (2 CPUs), ~2.5GHz
  Memory: 4096 MB RAM
  Available OS memory: 4060 MB RAM
  Page file: 1641MB used, 6478 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11

  Card name: NVIDIA GeForce GT 230 M
  Manufacturer: NVIDIA
  Track type: GeForce GT 230 M
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0A28 & SUBSYS_FF501179 & REV_A2
  Memory display: 2781 MB
  Dedicated memory: 1007 MB
  Shared memory: 1774 MB
  Current mode: 1680 x 945 (32 bit) (60 Hz)

  Post edited by: Bradders_1

  Hello

  The forum already contains these discussions where notebooks will freeze after 5 or 10 minutes of play. Have you read them?

  Now it s not easy to say what causes this problem but first of all you need to install the latest driver of Toshiba display. Don t use non-Toshiba drivers, as they can cause the overheating!

  Also make sure that you use the latest version of the BIOS and it s useful to clean the laptop time using a jet of compressed air.

• Satellite A660 - 1 EV turns off after 10 minutes of game

  I have problem with my cooling system.

  The problem is that I start a game (FIFA 12) and 10 minutes later, the laptop is off... Some time ago I sent it for repair place, you bought that I burn cooling and then the problem disappeared... Descriptions of... problem comes after the replacement of its cooling

  Hello

  I agree that dust and debris that can affect cooling performance.
  I have clean the fans myself using a jet of compressed air.
  Just blow the dust using the spray of compressed air that helps a lot.

• Windows auto-serrures after 10 minutes of inactivity.

  Can someone help me solve this problem? Windows Vista sends me back the connection after 10 minutes of inactivity screen, which becomes inconvenient when there is 5 to 10 times a day. First of all, it is NOT related to the screen saver, I have the "on RESUME, display login" unchecked, as well as my screen saver is disabled. It is also not related to the option to sleep in the advanced power settings, I have my computer never sleep. Vista is not sleep, hibernation, Logging Off ot, it is blocking. Basically it's just to send me back the login screen after 10 minutes of inactivity, and when I log in all my stuff is still there. Web pages or applications I had open are all still there, but it's always a pain the the _ because if I have any program configured to run automatically (as virus scans etc.) in the middle of the night programs start if the system is locked.

  I searched online for a while and could not find any help. It seems that everyone who has this problem just gets told to check their settings to screen saver and power, but this problem is not related to those.

  Hey Nick,

  This is sometimes possible when you computer from the fan or the computer gets hot. Go to BIOS and enable two fans cause by default only one fan is turned on.

  Let me know it works...

  DOM.

• Screen lock turns on after 5 minutes, even if turned off in screen saver

  My new installation pro 8 victory is affecting the black screen and locking the computer (have connection) after 5 minutes, even if I have wide screen saver (or value black screen for 15 minutes), no change of power or standby screen setting seems heal.  It's a pain when you are watching a movie or some such.  I found a work around in a little app called movemouse that move the mouse every 30 seconds, but I should be able to disable the function.

  Anyone else see this?

  Hi Jim,.

  Found the answer.

  I had added my accounts Gmail and Exchange of the Windows Mail application. Two security policies applied. It seems that the Exchange account forced a timeout/lock slowed down to 15 minutes. I went to user accounts via the classic Control Panel, and click Reset security policies. Issue disappeared at this time. I'm testing to see if the problem remains fixed after a reboot.

  Apparently, just remove the accounts does not solve this problem. In fact, you must reset such security policies described above.

  Let us know if this answer solves your problem!

• HP ENVY - 700-410 desktop: blocking after a minute of play.

  Okay, I just need to know where to download the display driver.  My computer guard lock on my after 1 minute of game World of Warcraft.  I asked the tech there and they said according to my computer spec that my display driver is outdated.  I don't know where to find it here.  Support assistant says there is no update.  Is there a place where I can get it I really need help here.

  Oops I forgot to mention that the problem is not with my computer but the game.  Several other people have the same problem as I am.

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• Internet connection is lost after 2 minutes

  In our House there are 4 teenagers - all with laptops, iphones, BlackBerry, etc.

  We have an internet connection to BT home hub.

  Everyone can connect OK except 1 latop - if using WiFi, laptop connect only for 2 minutes and he then loses the connection to the internet.

  The only way to get a WiFi connection again is to reboot the router.

  The laptop works fine when connected with an RJ45 LAN cable - problem only occurs if you use the WiFi.

  The laptop has Windows XP and Internet Explorer 8.

  The icon on the watch of the taskbar that the connection to the router is OK, and varies from excellent to mediocre according to how far the laptop is located rom the router.

  Why do I have a problem with this machine - I guess that it must be related to XP as all other machines have Vista or 7.

  Hello Gavin Duffy

  It may be possible but not likely.
  1. the system that only stays connected for 2 minutes, this problem only occurred after the settings have been changed in the router?
  2. did you check with your son that only security settings have been changed in the router?
  3. have you checked to see if this system is undergoing the same questions on other networks such as Café, the bookstore free networks or network of neighbors (the permission that they allow to connect)?
  Try to remove the wireless network profile and recreate.
  If you use 'Wireless Zero Configuration' to manage your wireless network, go to the network connections folder ("" Start > run ", type ncpa.cpl and click OK"), make a right click on the wireless network connection, select Properties, and then click the wireless networks tab, where you can highlight and then 'remove' an existing profile.
  After that you have removed, reconnect to your network and test to see if the problem still occurs.
  Thank you.

• Explorer Windows restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer unhandled 0x00000000 in explorer.exe exception States: after repair of Windows XP running.

  Windows Explorer restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer States of exception unhandled 0x00000000 in explorer.exe: 0CX0000005: reading location access violation) X 00000000 Code: 0XC0000005, flags: 0 x 00000000 after you run Windows XP repair. Repeated repair Windows now for the third time, repair works OK but always produces the result above!. Initially, ran SFC/scannow, he ran very well modified some files but has not fixed the problem. Now I can't run Sfc/scannow in administrator mode in a repair console or environment (cmd) receive error "Windows file protection could not initialize the scanning of protected files. The specific error code is 0X000006ba [the RPC server is unavailable]. Can not access services through msconfig in safe mode, no available tab. When I click on Control Panel in safe mode, I get an error but control then window opens I can access to the services window, but as soon as I click on any service Windows Explorer plunges a black screen with only the white inscription SafeMode visible in each of the corners. When I try to access the sound module in safe mode, I have an error message and he abandoned me in safe mode desktop. Have no tab restore field in system restore to create a system restore point. In safe mode do not log off, restart or shut down (only windows explore drops leaving the black screen with text in each corner indicating the computer in safe mode, no recorded parameters.) Tried to run scanreg.exe & scanregw.exe run, cmd, mode console repair but command is unrecognized. When I tried to run all these commands using BartePe, the States of error cannot access raw disk. In safe mode, I can access the first level for example my computer folder, but when I double click on the c drive or any other drive nothing happens!

  Access msconfig, run, cmd, Device Manager, uninstall programs etc. in safe mode.

  I can easily re - install a new OS on the C partition, but I like challenges! Is there anyone with the skill out there who can offer suggestions for this mother of all XP flaws? (apart from the installation of a new version of Win XP)

  Hi Semi_Tech,

  Step 1: Start the computer and use the Recovery Console to check for errors
  a. see to start the computer and use the Recovery Console
  b. at the command prompt, type chkdsk /f /r and press to enter.

  Step 2: We recommend that you check if the RPC Server service is running.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click RPC Server service.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  See if the steps mentioned by '- MainFrame -' can help you to:
  See windows SFC file protection could not run a scan of protected system files

  Step 3: Check if you can start the computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. connection to the administrator user account and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.