Similar Questions

• How can I configure Thunderbird to several email addresses

  I'm on Eudora 7 to manage 6 on a Windows XP SP3 computer email accounts. I want to install Thunderbird on the same machine and import e-mail addresses. I have Setup Eudora to store the data files for each e-mail address in a different data directory. This allows me to have another icon on the desktop for each e-mail account. Click on an icon to start Eudora with the e-mail address data stored in a specific directory.

  What I don't know, is how to make Thunderbird import the different e-mail addresses of Eudora in Thunderbird and how to separate individual e-mail address data in Thunderbird.

  Any help would be appreciated.

  To back up a little here. When you install Thunderbird it will import your Eudora mail and settings (both in regards to Thunderbird). So I suggest that you first import your mail (it does not Eudora) and see if it made a mess of your installation or not. I'm not punting.

  You should end up with a folder in the pane of folders with Eudora and your structure of folders below that.

  The main difference of Thunderbird to Eudora of Thunderbird do not detach attachments and store them somewhere else.

  Note that I don't think the preference of Thunderbird to use the global Inbox was changed, so it is by default in the global inbox for multiple POP email accounts Menu (Alt + T) tools > account settings > server settings > button Advanced is where the parameter disable the use of the global Inbox by account is hidden.

• How can I configure sbRIO sync time SNTP in MAX

  Hi all

  I try to sync my sbRIO-9612 to the SNTP server. I use LV 2011 SP1 (Please note: there is a similar topic on the forum EITHER but it does not allow me the question of setting).

  I downloaded NOR-Mercurihectopascalometer 1.2 and I followed the instructions ( https://decibel.ni.com/content/docs/DOC-14480 )

  I tried several addresses of servers (among them: http://tf.nist.gov/tf-cgi/servers.cgi#) but it does not work. Saying "it work does'nt ', I mean: sbRIO time displayed in MAX is not scheduled.

  By these tests, I forgot not restart the sbRIO, and waited for several minutes after the restart.

  Please see attached my sbRIO *.ini files and a screenshot showing my sbRIO setup in MAX.

  Does anyone have an idea to help me?

  Julien

  I have connected a little sbRIOs to a time server using these instructions:

  http://digital.NI.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43?OpenDocument

  Be sure to correctly configure the network settings of your device (gateway, etc...)

  Kind regards

  Marco

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• How can I configure Mozilla to accept connections on port "The World Wide Web (HTTP) service"?

  When you try to embed a video in PowerPoint 2013, the "Sorry we are having some problems of temporary service" message.

  In research on the problem to Microsoft. com, the following message is received: Mozilla is not configured to accept connections on port "The World Wide Web (HTTP) service."

  Hmm... PowerPoint must use Windows to connect to the internet and not Firefox.

  What method do you use?

  (1) insert > video > video online

  Apparently, there was an update this month that allows this, as described in this message of support (see the top of page answer right after the question): embedding video in powerpoint 2013 - Microsoft YouTube community online

  Here's how it should work after the update: Insert or link to a video on YouTube - PowerPoint

  (2) developer > control > Shockwave Flash Object

  As documented on other sites, such as: https://www2.palomar.edu/pages/atrc/2013/09/17/how-to-embed-youtube-video-in-powerpoint-2013/

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• Equium M70: I can not configure the keyboard

  My computer is an equium M70 is the keyboard layout: English Kingdon, because I bought the laptop in England last year... but I moved from my country - brasil and I can't configure the keyboard to use the Brazilian Portuguese accents, I tried so many different layouts page, but no one worked... so, how can I get additional support for sorting? I've already sent an email to toshiba brasil and toshiba England asking for help, it is very important...

  Thank you very much

  Hello

  You can change the keyboard language settings in the Control Panel regional and language settings language Details tab

  In the installed services, you can add the Brazil or / and keyboard Portuguese language.
  Please note: you can set several languages. To switch between the settings please use the keys ALT + SHIFT.

• The device or resource (127.0.0.1) is not configured to accept connections on port "The World Wide Web (HTTP) service".

  Hello

  I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".
  Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• How can I configure computer mi to ACCEP https connection

  How can I configure computer mi to ACCEP https connection

  original title: my device does not accept the connection of the https port, I have Windows vista

  Hi, Rosariopenaranda,

  Do you get any error Messages?

  Tools > Internet Options > Advanced tab

  Scroll down to the Section navigation

  Uncheck Show friendly https error messages

  Click on apply, Ok

  Tools > Internet Options > Connections tab

  Click the Lan settings button

  Check automatically detect settings

  Click Ok, apply, Ok

  Change proxy settings in Internet Explorer

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer

  HOW to: Use Wfetch.exe to troubleshoot HTTP connections

  http://support.Microsoft.com/kb/284285

• The device or resource (web proxy) is not configured to accept connections on port "8080".

  I move my windows pc to windows 7 10 but its many problems.

  can I roll back to windows 7, my internet connection is always troubleshoot 'device or resource (web proxy) is not configured to accept connections on port "8080".

  First of all, I say I have windows 7 os in the office and we are connected to the network with BSNL Modem LAN cable. Its saying connected and access to the Internet but cannot able to access to any browser.

  I can using only Mozilla Fire Fox his work but other browser do not work.

  Hi Dhyan Singh Talodiya,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Are all the device drivers and Windows updates are updated?
  2. You have security software installed?

  According to the description of the computer problem is cannot connect web proxy. The device or resource is not set to accept the connection on port 8080. The question might be if there is a corruption of parameters network or security software is limiting. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1: Resolution of network performance problems.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2: Are looking for connection settings:

  1. start Internet Explorer.
  2. click on the Tools menu and then click Internet Options.
  3. click on the Connections tab.
  4. by dial and VPN settings, click the broadband connection, click settings, and then click on automatically detect settings.
  5. click on OK.

  Method 3:

  Temporarily disable the software security and user account control exit ramp when connecting.

  Follow the steps described in the article below to temporarily turn off the ramp of user account control and security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows/turn-user-account-control-on-off#1TC=Windows-7

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  I hope this helps. Please let us know the results. Feel free to write us again for any further assistance. We will be happy to help you.

  Kind regards

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• How can I configure back upwards to use drive F on windows 7

  How can I configure regular back up to the R drive instead of drive E

  Tuesday, October 9, 2012 12:38:44 + 0000, sidneygough wrote:

  How can I configure regular back up to the R drive instead of drive E

  You say 'F drive' in the subject line "R drive" above. Who is
  It?

  What are drives E, F, and R? Is there other drives? Other
  partitions on your hard drive only? CD/DVD readers? Something else?

  If F (or R) is another hard disk or partition on your only hard
  by car, you want to do is better than no backup at all, but just
  barely. It is a very poor place to put a backup.
  I do not recommend backup on a second partition or second no removable
  Hard drive because it leaves you losses likely to be simultaneous
  the original and backup for many of the most common hazards: severe
  seeds of power, near lightning, virus attacks, same flight of
  the computer.

  In my view, secure backup must be on a unguarded and removable media
  in the computer. For backup really secure (required, for example, if the)
  the life of your company depends on your data), you should have several
  generations of backup and at least one of these generations must be
  stored off-site.

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake, Microsoft MVP

• How can I configure windows 8 tiles screen as my default page, instead of going to my office eveytime I close a program?

  How can I configure windows 8 tiles screen as my default page, instead of going to my office eveytime I close a program?

  I posted earlier today that I had the same problem, but I think it is now resolved.  In the search engine, type bar of tasks and navigation.  Under Navigation, there are several areas, which is to return to the office from the beginning and end of programs.  In my case, this option is checked.  I have no idea how he became verified that I just started having the problem... a week ago but it is now disabled and the problem seems to be resolved.  I hope this helps!

• How can I configure Windows 8 to remember my wireless keys?

  How can I configure Windows 8 to remember my wireless keys?  I have 4 SSID in my house, and whenever I connect to either of these wireless networks I re - enter the wireless key, even if I have already connected to it several times before.  Windows 7 remembers them as do Apple products.  It's really annoying.  (Please do not recommend 3rd party stupid WiFi8 app - it is undesirable)

  Yes, I meant Windows Defender, I apologize.

  I solved my problem by taking the direction of the Intel PROSet/Wireless WiFi connection utility WiFi card. I have the system configured to allow the Intel tools manage the WiFi, but Intel for some reason any would forget that he had the credentials. When I put management back to Windows 8, the problems disappeared.

• How can I configure an image at its actual size?

  How can I configure an image at its actual size? Let's just say my image 800x800px dynamic object. I place it in a project of 400x400px. I put on the scale the image several times, and I don't remember its original size, for the sake of argument. What I can do to get it back to 800 x 800 and where can I check to see if it is 800 x 800 I know I'm not more?

  If it's a select of the smart object layer, go to free transform mode and then check the updated image to scale in the toolbar options at the top of your screen. The scale factor will continue to be updated every time you to scale the layer. It is not reset back to 100% as a regular layer.