can I extract the files from the _flat.vmdk file
We have suffered a data corruption on a LUN, and I find myself with only a file Server1_1 - flat 200GB hard. No vmx or any other config file. Can I remove all the data from this flat file?
Thanks, Mike
I would like to try to recreate the descriptor VMDK file. If this works, you should be able to join any virtual computer. However if you lost files, parts of this file may be corrupted. You won't know until you try to attach to a virtual machine.
Good luck
Charles nights, VCP
If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.
Tags: VMware
Similar Questions
-
I can't extract the zip files; I get an error message that says: "Application not found". When I check help & press the Start button, it tells how to do it. I thought a program to automatically extract compressed files came with Vista.
Hello
1. you use the functionality of Windows Vista to unzip file or third party software?
2. have you done any software or hardware changes on your computer before this problem?
To work with this problem, see the following methods.
Method 1:
Scan of the SFC
Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
http://support.Microsoft.com/kb/929833
View the results of the analysis.
Method 2:
Run the fixit from following link.
Difficulty of broken desktop shortcuts and common system maintenance tasks
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-usIn addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
Check if it helps.
-
How can I extract the files of calendar?
Thank you for the review of this post. I appreciate any help you can provide.
I recently bought a new win 7. My tech copied all my old data from the previous machine to a single folder on my new machine.
I have a few Palm data... But it has not imported the TX model will not be installed on my Win 7 machine, so I have to achieve this through Palm Desktop. (I have read that could be caused by the fact that I went to version 6 of the palm software and tried to import).
Quite simply, here's my problem: I just want to really get my calendar information. I'll probably use a program different schedule in the near future.
How can I extract the data from the calendar since raw files? (Calendar.dat, etc.) ???
I have TO import or somehow go through the Palm software, or is it possible outside of Palm?
I THINK that this cannot be something too difficult, but I am so stuck and missing an appointment every day.
I am very grateful for your help.
Don in Tucson
AizA
With the version of the data files you have, you will need to install Palm Desktop 4.1.4e or 4.2. You will need to uninstall Palm Desktop 6.2, if that's what you have installed currently. With the .dat extension files are not compatible with PD 6.2.
Another thing to consider is the Win7 version you have installed. If you have the 64-bit version, you will only be able to sync wireless using bluetooth, infrared, or wi - fi. On your PC, go to the computer icon and right-click. Look at the page and see if it says 64 bit any where. If you have the 32-bit version, you can synchronize via USB cable method, but you must ensure that you have the correct version of installed PD.
In PD .dat files, you will need to go to the folder of user name on the drive of the program and paste the files in the appropriate subfolder. Make sure that the PD is closed. Go to c-program files-palm and find the folder user of PD. Once you find the file, search for the subfolders of this folder for address (this is the contacts folder), calendar (calendar), memos, and tasks. Paste the address.xxx files in the folder of the address, the file datebook.xxx in the folder of the agenda, etc.. Once the files in the respective locations, open PD and see if the data is there. If this is the case, you can then set the synchronization according to your version of Win7, either wireless or USB.
-
Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file. I tried several times and restarted does not. What can I do about it?
To refer to EX11 some:
Creative cloud (WIP) error codes | Error postal codes of Mylenium
Mylenium
-
How can I extract the year of a variable?
Hi all
I want to extract the year of a parameter.
I tried the following, I make mistakes.
When I run the code below,
SELECT TO_CHAR(:X_PRM_YR_END_DT,'YYYY') FROM dual;
I got the following error.
ORA-number 01722:invalid
When I run the code below,
SELECT TO_DATE(:X_PRM_YR_END_DT,'YYYY') FROM dual;
SELECT to_char (TO_DATE (: X_PRM_YR_END_DT, "YYYY")) FROM dual;
I got the following error.
ORA-01830: date format end before you convert all of the input string
When I run the code below,
SELECT extract (YEAR FROM: X_PRM_YR_END_DT) FROM dual;
SELECT extract (YEAR FROM 01/11/2013) FROM dual;
I got the following error.
ORA-30076: invalid field extracted from source
How can I extract the year of a variable?
Help me please
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
Try this,
SELECT TO_CHAR (to_date (' 01/01/1980 ',' dd/mm/yyyy'), 'YYYY') FROM dual;
-
How can I extract the frequency of the FFT function?
Hi all
How can I extract the frequency of the FFT function in labview? Thanks in advance
Concerning
If you have the f0 and df, you can find your frequency as you would find the time with a waveform based on t0 and dt. You just need the index of the data point in that you want to get the frequency. The frequency is then f0 + x * FD, where x is the index of the data point you are interested in.
-
When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.
Hello, BGNG,.
This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .
-
How can I extract some pages from my document and save it as another file?
How can I extract some pages from my document and save it as another file?
You will need Adobe Acrobat to do that, not Adobe Reader.
-
How can I extract the msi from exe to install drive?
Usually, when I want to extract the msi file from the distribution of exe (for Group Policy) installation drive, I download from get.adobe.com/reader/enterprise and decompress the exe file using 7zip. Then I integrate the msp inside file and I'm pretty much good to go.
Now, when I try to extract the msi file, I get a directory full of stuff, but no msi at all. I tried the installer and watch in C:\users\username\AppData (it works for Java), but it wasn't there.
No idea what I am doing wrong? Or y at - it a new way to extract the msi file that I missed?
Thank you!
Bryan
Hi bryan10983,
You can visit this link to get the answer to your query: http://blogs.adobe.com/dmcmahon/2010/06/16/how-to-extract-an-msi-file-from-the-exe-for-ado be-player /
Kind regards
Ajlan Huda.
-
How can I extract the files in the subfolders in the main folder quickly?
Hello!
I have a problem with the files.
I have a DVD with one main folder that contains 26 subfolders. Each subfolder contains 25 numbered documents up to 025 001.
I need all these documents of all 26 cases out of these records and be together in the main folder.
I now do it manually, by copy paste all 25 docs out of each subfolder in the main folder, but I think that there must be a more efficient way.
As much as I do for 50 DVD...
I hope someone can help me with this!
Thank you!Here is the method I would use, because I'm super nerd:
1 - Open the main top-level folder.2. in the search box, type a single asterisk (*) which will cause all files that point downwards (in subfolders) is displayed in the results of research, regardless of the folder they are in.3. drag all files in search results in their new home.You can also filter by file type. To copy only word documents, simply type .doc in the search box. -
Hi, please help me whit this query
Im trying to extrate the data in a file csv and im using the ULT_FILE package
I have this query that read the file and the first field, but if the field has a different length does not work as it shouldFor example if I had this .csv file:
1, book, laptop
2, pen, Eraser
3, notebook, paper
And in the table, I had to insert like this
ID descrption1 description2
laptop 1 book
Eraser pen 2
paper laptop 3
For now, I have this query, which displays only with DBMS:
Declare
-Variables
Cadena VARCHAR2 (32767).
Vfile UTL_FILE. TYPE_DE_FICHIER;
Dato varchar2 (200); -Date
dato1 varchar2 (200);
dato2 varchar2 (200);
Identifier varchar2 (5): = ', '; -Identifier (en)
v_ManejadorFichero UTL_FILE. TYPE_DE_FICHIER; -For exceptions
-Table variables
I_STATUS GL_INTERFACE. % OF STATUS TYPE.
I_LEDGER_ID GL_INTERFACE. TYPE % LEDGER_ID;
I_USER_JE_SOURCE_NAME GL_INTERFACE. TYPE % USER_JE_SOURCE_NAME;
I_ACCOUNTING_DATE GL_INTERFACE. TYPE % ACCOUNTING_DATE;
I_PERIOD_NAME GL_INTERFACE. TYPE % PERIOD_NAME;
I_CURRENCY_CODE GL_INTERFACE. CURRENCY_CODE % TYPE;
I_DATE_CREATED GL_INTERFACE. DATE_CREATED % TYPE;
I_CREATED_BY GL_INTERFACE. CREATED_BY % TYPE;
I_ACTUAL_FLAG GL_INTERFACE. TYPE % ACTUAL_FLAG;
I_CODE_COMBINATION_ID GL_INTERFACE. TYPE % CODE_COMBINATION_ID;
I_ENTERED_DR GL_INTERFACE. TYPE % ENTERED_DR;
I_ENTERED_CR GL_INTERFACE. TYPE % ENTERED_CR;
I_ACCOUNTED_DR GL_INTERFACE. TYPE % ACCOUNTED_DR;
I_ACCOUNTED_CR GL_INTERFACE. TYPE % ACCOUNTED_CR;
I_TRANSACTION_DATE GL_INTERFACE. TRANSACTION_DATE % TYPE;
I_REFERENCE1 GL_INTERFACE. REFERENCE1% TYPE;
I_REFERENCE2 GL_INTERFACE. REFERENCE2% TYPE;
I_REFERENCE3 GL_INTERFACE. REFERENCE3% TYPE;
I_REFERENCE4 GL_INTERFACE. REFERENCE4% TYPE;
I_REFERENCE5 GL_INTERFACE. REFERENCE5% TYPE;
I_REFERENCE10 GL_INTERFACE. REFERENCE10% TYPE;
I_GROUP_ID GL_INTERFACE. GROUP_ID % TYPE;
BEGIN
Vfile: = UTL_FILE. FOPEN ('CAPEX_ENVIO', 'comas.csv', 'R');
loop
UTL_FILE. GET_LINE(Vfile,Cadena,32767);
dato1: = substr (cadena, instr(cadena, identificador,1,1)-1, instr(cadena, identificador,1,1)-1);
dato2: = substr (cadena, instr (cadena, identifier, 1, 1) + 1, instr(cadena, identificador,3,1)-3);
dbms_output.put_line (dato1);
dbms_output.put_line (dato2);
-The evidence
-dbms_output.put_line (cadena);
-dbms_output.put_line (substr (dato, 3, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (dato, instr (dato, identifier, 1, 2) + 1, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (cadena, 1, length (cadena)-1));
end loop;
UTL_FILE. FCLOSE (Vfile);
-----------------------------------------------------------------------------------EXCEPTIONS------------------------------------------------------------------------------------------------------------------------------------------------------------
EXCEPTION
When no_data_found then
dbms_output.put_line ('Todo Correcto');
When utl_file.invalid_path then
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20060,'RUTA DEL ARCHIVO NULLIFIED: (');)
WHEN UTL_FILE. INVALID_OPERATION THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20061,'EL ARCHIVO NO PUDO SER ABIERTO ");
WHEN UTL_FILE. INVALID_FILEHANDLE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20062, 'INVALIDO MANAGER');
WHEN UTL_FILE. WRITE_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20063, 'ESCRITURA ERROR');
WHEN UTL_FILE. INVALID_MODE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20064, 'MODO INVALIDO');
WHEN UTL_FILE. INTERNAL_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20065, 'ERROR INTERNO');
WHEN UTL_FILE. READ_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20066, 'LECTURA ERORR');
WHEN UTL_FILE. FILE_OPEN THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20067,'EL ARCHIVO ARE ESTA ABIERTO ");
WHEN UTL_FILE. THEN ACCESS_DENIED
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20068, 'REFUSED ACCESS');
WHEN UTL_FILE. DELETE_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20069, 'OPERACIÓN BORRADO FALLO');
WHEN UTL_FILE. RENAME_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20070, 'OPERATION SOBREESCRITURA FALLO');
END;
Hello
Try something like this:
POS1: = INSTR (cadena, idntificador, 1, 1);
POS2: = INSTR (cadena, idntificador, 1, 2);ID: = SUBSTR (cadena, 1, pos1 - 1);
description1: = SUBSTR (cadena, pos1 + 1, (pos2 - pos1)-1);
Description2: = SUBSTR (cadena, pos2 + 1);where pos1 and pos2 are numbers.
Rather than use UTL_FILE, consider creating an external table. You won't have to write any PL/SQL, and this means that you won't be tempted to write a bad article of EXCEPTION.
-
I can't extract the zipped files, all I get is empty folders
Hello
I use Windows 7. I have not downloaded another file compression/extraction software, I use the built-in software. If I try and open the zipped files by choosing the option "extract files" I wonder where I would like to save the extracted files. I said where I want them to go, everything seems to be fine, I told me that the files are checked and and a new folder is created. When I opened this case, however, I like that it is empty.Is - this from there anyway I can access the decompression software to see if something is wrong or there at - it an option to re - install?I am reluctant to introduce the third-party software zip that I use my laptop for my PhD thesis and I don't want to put in place something that will cause problems and send three years of work down the drain.Thank youHello
I suggest you to do the same steps that Marilyn has suggested, just with the files themselves. In addition, instead of click to open files from Windows Explorer, choose any program is indicated for each file. For example, choose Microsoft Word .doc file. Etc.
Diagnose and repair Windows files and folders problems automatically: http://support.microsoft.com/mats/windows_file_and_folder_diag/
-
I am trying to extract a zip file I downloaded, but the option extract is no longer there. I did so many times in the past with no problems. The icon is also different, where it helps to have a folder with a zipper, it is now a white square with a picture of a computer inside. I tried everything... someone please help!
Hello
Can you work with other ZIP files? If Yes, then this file is not a real ZIP file or it is damaged.
Check with the source.---------------------------------------------------------------------
If you have problems with all the ZIP files, that they should contribute:
Do a Restore Point to use in case you make a mistake, then you can skip a few steps.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlIf you need later:
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html----------------------------------------------------------------------------------------
Now you can skip exports
Click the start Orb - type in the area of search-> regedit - continue click on user account control
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.zip
Click on the drop down arrow to the left of the file .zip
Right-click on OpenWithList
Click on delete
Click Yes
Right-click UserChoice
Click on delete
Click Yes
Exit regeditYour .zip files should now open with the native compression/decompression system that comes with Windows Vista.
=======================================================================
If necessary:
How to restore Vista built-in ZIP files Support
http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.htmlHow to enable or disable the files compressed in Vista
http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html---------------------------------
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlRestore and return the file Association in Windows Vista if Original
http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/ Reset and difficulty Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS,
ZIP, LNK, folder, drive)
http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/For Windows Vista file association problems
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html=====================================
7-zip is a free alternative, and it has a forum to help:
7-zip
http://www.7-zip.org/7-zip - Forums
http://sourceforge.NET/projects/sevenzip/Forums/Forum/457977-zip - Support
http://www.7-zip.org/support.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I can't extract the zipped files.
Whenever I try, windows Explorer opens a series of new tabs with nothing in it; Then I shut down or restart in order to stop the opening of new tabs to continue.Hello
Do a Restore Point to use in case you make a mistake, then you can skip a few steps.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlIf you need later:
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html----------------------------------------------------------------------------------------
Now you can skip exports
Click the start Orb - type in the area of search-> regedit - continue click on user account control
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.zip
Click on the drop down arrow to the left of the file .zip
Right-click on OpenWithList
Click on delete
Click Yes
Right-click UserChoice
Click on delete
Click Yes
Exit regeditYour .zip files should now open with the native compression/decompression system that comes with Windows Vista.
=======================================================================
If necessary:
How to restore Vista built-in ZIP files Support
http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.htmlHow to enable or disable the files compressed in Vista
http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html---------------------------------
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlRestore and return the file Association in Windows Vista if Original
http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/ Reset and difficulty Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS,
ZIP, LNK, folder, drive)
http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/For Windows Vista file association problems
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How can I extract an image from a .jpg file?
Attached is a. JPG, I want to change. I have a lot of drawing like this we would like to make a catalog. I want to make all the doors of the thesis of the same image with transparent square bottom size. I understand how to remove the bottom however when I try to adjust the size of my image it always adjusts my canvas size. What I tried to do, is to have a layer of transparent background with the door image on a separate layer, but I'm not having any luck. I'm new to PS, so my knowledge is limited. Any help would be appreciated. I use the extended version of CS4.
All your canvas sizes will have a consistent size? Door images too? Is this number? You can try this:
1 make the active layer (Layer 1 instead of background) image
2. Select the entire document outside the shape of the door (using the magic wand + add the number with lasso)
3 remove the part of the image: it's transparent.
4. go in picture, trim, all transparent pixels, what you're left with now is the part of the door of the image.
5. go to the size of the image and put the dimensions in pixels of the door (hopfully not upsampling)
6. flatten image
7 go to the canvas size, set the size you want (as long as it is greater than the door) and a ratio of 1: 1 that you should now have a square bottom.
I know that sounds like a lot of steps, but this can be automated into action. I do that all the time with photos of products that need to adapt to a standard window. Just another way to go, hope this helps...
Maybe you are looking for
-
Cannot copy songs on ipod classic
I recently found errors when you synchronize from itunes for my ipod to 6gen classic to my hp Windows 10. When I connect to the start via USB, I get the message "of problems with the drive, the analysis to solve." then in itunes after initially conn
-
Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53 I tried many solutions suggested, nothing works. Please advse. T
-
I just got a very stripped down Android tablet, which is all that I need. The browser is not exactly feature rich, but I don't want to lose if the Firefox browser does not work on the tablet.
-
W8 can open files of "docx"?
I often receive emails with attachments docx. Why the w8 will not open these files?
-
Hello New owner of a T3-710 here and can not say that I am happy. No items in the box similarly not a simple guide for the connection. The only thing was a document showing how to connect the hard wired keyboard (not Applicable to my version) or plu