New Acer Aspire user T3-710

Similar Questions

• RAM and SSD for my new Acer Aspire R7 752-5893

  Suggestions for the type of RAM and SSD memory for my new Acer Aspire R7 752-5893? TX in advance.

  You will need RAM SO-DIMM 204 format pins for your laptop. DDR3-1600 (PC3-12800, also known as) should work a treat.

  Your SSD should have an MSATA interface, so depending on what is here right now, you can place in a Plextor M6M disc.

  There are a few live hidden on the chassis of R7 - you can take a look here and see how to open it, and then you will know what players and the RAM slots you have available.

• Old printer Canon Pixma MP500 and fairly new Acer Aspire Netbook.

  I have a CanonPixma MP500 Printer/scanner/copier that worked very well. on my desk. I now have an Aspire One Acer Netbook and I have set the printer after buying a lot of expensive ink and hooked it up to netbook - generally things are taken & play... Cannot get this to work at all. I'm puzzled. Can anyone help?

  What version of Windows is on your new netbook?

  How were you trying to set up the printer?

  • I have just connected it and expected to work
  • I used the Add Printer Wizard
  • I inserted the CD that came with the printer and started the installation routine
  • I downloaded the software from the Canon Website and he ran

  That's happened?  If you got an error message, please quote completely, without paraphrasing.

• How to register my new acer aspire laptop 5755

  How can I save my newly purchased aspire laptop 5755

  To register your computer you can contact Acer support in your region or use https://registration.acer.com/

• ScanJet with acer aspire one

  I try to use my hp scanjet g3110 with my new acer aspire one.  It works very well with my old computer Tower, but with the new there was a message saying it was looking for the driver, then a message saying that the scanjet was a pilot. Any suggestions?  Thank you

  HP Scanjet G3110 drivers:

  	»	Microsoft Windows 7 (32 bit)
  	»	Microsoft Windows 7 (64-bit)

  To see if you have Windows 7 32-bit or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

• WINDOWS 7 STARTER/ACER ASPIRE ONE UPDATE HELP

  I have a brand new Acer Aspire One Netbook.  It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update.  When the update is complete, it blocks my netbook.  I get a black screen and a cursor only.  The only way I can fix it is to restore back to the factory and start all over again.  Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.

  You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.

  I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.

  TaurArian [MVP] 2005-2011 - Update Services

• Acer Aspire E5 8.1 how to open design embroidery

  My XP has finally given up and therefore have a brand new Acer Aspire E5 with 8.1 which is a beautiful machine and love much features but if I can not understand how to open a design downloaded with Bernina Artlink 7 (free download of Bernina) software I have no use for him at all.  This should be a very simple task and has turned into a nightmare of technical support calls without that person not understanding that all I need is to be able to tell the computer what program I want to use to open the embroidery design. I hope someone can help simplify the matter for me.

  Welcome to.

• Acer Aspire 5541 G mother board replacement

  Hello

  I want to replace the faulty motherboard of my motherboard model number Aspire5541G , I downloaded the photos...
  Please if anyone knows how to get the exact card for my laptop and where him find... will be much appreciated
  Thank you

  

  

  THE - 5992P = MB. PBY02.001 see here:

  http://www.aliexpress.com/store/product/MBPQC02001-MB-PQC02-001-motherboard-for-aspire-5241-5541-NDW...

  That said, it's new with or without original packaging.

  http://www.eBay.com/ITM/new-Acer-Aspire-4336-4736-motherboard-MB-PBY02-001-MBPBY02001-8131-/27139291...

  You can also search MB. PBY02.001

• Windows 8 on Acer Aspire ES1-131-C1NL

  Hello! I bought mu new Acer Aspire ES1-131-C1NL. There Windows 10 aboard, but I want to install Windows 8, not 8.1. And the question: will be Windows 8 on this machine work propely? Windows 8 support 8.1 for Windows drivers aspire es1-131-c1nl? Because I'm sure that windows 8.1 will be work propely, but I don't know what Windows 8. Please help me

  Make the drive from USB recovery Acer before do you so you can return the laptop to factory State. You will need to do a clean install of win 8 or 8.1 and you lose the recovery partitions and all the stuff of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/38147/~/Windows-10%3A-create-a-USB-recovery-drive-u...

  Having big problems with Win 10? It's just 8 improved Windows.

  If it runs 8.1 iy should work 8, but you could have driver problems.

  What is the problem with 8.1?

  I installed 8 Start ($4.99) http://www.stardock.com/products/start8/

  in mine and I forgot I have Windows 8.1 and there is also a 10 to start.

• Upgrade Acer Aspire E5 - 452G memory?

  Guys, I have a little problem with my new Acer Aspire E5 - 452G.

  She founded on AMD FX8800P dual graphic carrizo 335 R5 and R7

  The problem is with the 3d games as performance is not very good at all.

  I'm under DOTA2@720P without AA and SHADOW-BASS.

  Other options are maximum.

  My framerate is around 20-50.

  My laptop has only a Memorystick (8GB), thus, it runs on a single channel.

  I was wondering, if it is possible for me to upgade to 16GB (8 GB X 2) dual channel?

  If Yes, will gain more framerate? and what stick/types of memory will be useful to my laptop?

  Can I buy memory somewhere on the internet and add it to my laptop by myself without void my warranty?

  Thank you guys

  WaYTarN

  waytarn,

  This laptop shows that it supports a maximum of 16 GB of DDR3L (1.35 V) 1333/1600 204 pin memory using two 8 GB modules. Your guarantee will be cancelled if you added memory, just be careful and do any damage.

  We have tested the following modules of 8 GB of memory in this system:

  Kingston

  ACR16D3LS1KNG / 8G

  Samsung

  M471B1G73EB0-YK0

  Hynix

  HMT41GS6BFR8A-PB

• What is the size of the ODD in Acer Aspire ES1-521?

  Hi, I ordred my new Acer Aspire ES1 - 521 (A4-6210), to use as a backup PC.

  I want to add an SSD, and I don't want to throw the HARD drive.

  I have my planning to place the HARD disk in a HARD drive enclosure.

  But I don't know what size to buy.

  It is 9.5 mm?

  COz, I already sort of 9.5 mm.

  Plezasae response.

  Hello

  The height of the STRANGE is 9.0 mm. You can remove the STRANGE or the STRANGE dummy and measure the height of the Bay of housing.

• High temperature of Acer Aspire One 725

  Hello

  I just got my new Acer Aspire One 725 and it works very well - however, when I checked what temperatures at which it turns, I'm quite concerned.

  The inactive temprature is about ~ 60 degrees Celsius, and under load, he got to 87 degrees Celsius until I turned it off.

  I tried to disable all unnecessary applications, but which has not helped. The netbook is brand new.

  Ideas appreciated.

  Thank you!

  Fusha, I got this from a review on Notebookcheck:

  "However, under strong charge of treatment in our stress test, the netbook 11.6-inch become considerably warmer. We measured temperatures of 39.3oC (102.7oF) and 43.6oC (110.5oF) for the top and bottom of the base unit, respectively. The palmrest has never exceeded 32.0oC (89.6oF). Our stress test represents an extreme case, but it is nevertheless clear that the quiet cooling system has negative consequences in terms of heat retention when the netbook is under heavy loads of treatment. »

  However, you are much warmer than that. Turn off your computer and trigger a short sound of compressed air in the vent of output. When running, hold your fniger on the exit vent to make sure that the fan actually works. If this does not resolve your problem, a computer store can put a fan nine of your platform.

• Acer Aspire V15 not charging

  I have a fairly new Acer Aspire V15 (I think I got it a month). He is in charge is no longer at all.

  A few days ago, it seemed that the connection of the charger may be loose - he was charging intermittently - I could move there and find a place where she would charge. Today, it seems that he is no longer a connection when I plug in the charger.

  I read somewhere to take out the battery to see if the laptop would only go on the charger, but it doesn't look like the battery can be purchased.

  Someone at - it recommendations for me?

  Thank you!

  He's going to need a new charging port. If he is stirring, he broke loose from the motherboard. Which is usually caused by someone tripping over the cord or hit the plug against something. Unless you can do it, you should check in for warranty repair.

  http://customercare.Acer.com/customercare/default.aspx

• Acer aspire switch 10F / I don't see hard drive

  Hi, today I got a new acer aspire switch 10F. I live in Poland, but I bought the acer in the United Kingdom.

  So I turn on the acer and I see acer have 10 windows. I check 'This PC' and I do not see a HARD 500 G 0.o disk, only 32GB. I thought I have a version without the HARD drive, but have all versions. The keyboard/dock is heavy, so I think that hdd is in the keyboard, but windows can't see HDD.

  This is screen printing:

  

  In disk management.

  Maybe I don't have some drivers?

  Please help than kyou

  Hello

  Yes, yours is not equipped with a HARD drive. Last year, I have evaluated a similar model (only 32 GB mem) and have not found the dock Ko was very heavy. The message, in my view, that it comes to USB ports (e.g. plugged USB flash drive).

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.