Can I get attached to my mac pro with the Fuji xt1?
Please help I'll try to find how to attach my Fuji xt1 to my mac pro. So far, this has been a frustrating effort. Can anyone help?
No.:
Attached to the camera in Lightroom support
Tags: Photoshop Lightroom
Similar Questions
-
What is the best wireless printer, I have an ipad and the mac pro with the lions
What is the best wireless printer, I have an ipad & mac pro with the lions
Hello
According to your budget, any printer in this list may very well do the job:
http://support.Apple.com/kb/ht4356
Kind regards.
-
Can I get a renewal of my membership with the 2 month for free?
Can I get a renewal of my membership with the 2 months free?
Please contact support:
Concerning
Megha Rawat
-
Impossible to share the internet connection on the mac pro with the 5s iPhone book
Hi, I use Internet on my mac pro book using ethernet
I try to connect to internet on my iPhone 5 s using internet sharing. When I try to connect my iPhone using wifi it shows that there is an authentication failure
Please help me solve the problem
Thanks in advance
Hi Hima8,
If you are unable to get your iPhone to connect to a network Wi - Fi, the article below the link Details a number of troubleshooting steps that may help restore his ability to do.
All my best.
-
How can I get my Firefox persona to work with the new version of Firefox?
It worked fine, then my computer automatically updated Firefox and my persona background disappeared. It is listed as active on the backgrounds of modules in the modules Manager. I Foxkeh tail stir. I went and reinstalled but it still does not come. I went to the personas firefox page and tried to install a different character. NONE of them work now. How can I get my background persona back?
Make sure that you are not Firefox running in (permanent) private browsing mode.
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
- Uncheck the box: [] "always use the navigation mode private.
When you're in private browsing mode then the character is disabled and you get the default theme and a purple icon of PB in the menu button on the side of the right end of the menu bar (bar of tabs on Linux) or Firefox and "(navigation privée)" added to the title bar. "
-
How can I get my copy saved Windows XP with the return to lose all current data?
I had my PC worked on so I could play better. This tech guy did some work was right but put windows xp pro service pack 3. on this subject. He said it was legal and he went from checking. He did it for about 6 months. I lost my power in a storm and when I succeeded him and pulled upward it did not check my copy of 'registered '.
Hi Maddmaatt,
Thanks for posting. A few hardware changes may report a reactivation of your OS. To activate XP as he asks and take the phone option. The helpline can provide you with the new activation keys.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How can I get voice and data to work with the ASA 5505?
Here's the issue I'm having. Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it. However, when I try to create a separate Vlan for voice and data, it does not work. Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work. I upgraded to a security more license and tried vlan3 created as voice. I have the data to the top and work but I can't get vlan3 to work. Any help would be greatly appreciated. Thank you
Here is my current config:
hostname TESTvpn
activate the password xxxxxpasswd xxxxx
username admin password xxxxx privilege 15
name Corp_LAN 10.0.0.0
name 192.168.64.0 Corp_Voice
name 172.31.155.0 TESTvpnobject-group network SunVoyager
host of the object-Network 64.70.8.160
host of the object-Network 64.70.8.242the Corp_Networks object-group network
network-object Corp_LAN 255.0.0.0
object-network Corp_Voice 255.255.255.0interface vlan2
nameif outside
security-level 0
IP address dhcp setroute
No tapinterface vlan1
nameif inside
security-level 100
IP 172.31.155.1 255.255.255.0
No tapinterface vlan3
nameif Corp_Voice
security-level 100
IP 172.30.155.1 255.255.255.0
No tapoutput
interface Ethernet0/0
switchport access vlan 2
No tapinterface Ethernet0/7
switchport access vlan 3
No tapoutput
dhcpd allow inside
dhcpd address 172.31.155.10 - 172.31.155.30 inside
dhcpd dns 10.10.10.7 10.10.10.44 interface inside
dhcpd sun.ins area inside interface
dhcpd allow insideenable Corp_Voice dhcpd
dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
dhcpd interface of sun.ins of the Corp_Voice domain
enable Corp_Voice dhcpd
dhcpd option 150 ip 192.168.64.4 192.168.64.3Enable logging
exploitation forest buffer-size 10000
monitor debug logging
logging buffered information
asdm of logging of informationoutside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any one time exceed
access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 anyVPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
extended VPN ip 172.31.155.0 access list allow 255.255.255.0 anyinside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Corp_Voice_access_in in the Corp_Voice interfaceGlobal 1 interface (outside)
NAT (inside) 0-list of access VPN
NAT (inside) 1 172.31.155.0 255.255.255.0Enable http server
http 172.31.155.0 255.255.255.0 inside
http 172.30.155.0 255.255.255.0 Corp_Voice
http 192.168.64.0 255.255.255.0 Corp_Voice
http 10.0.0.0 255.0.0.0 inside
http 65.170.136.64 255.255.255.224 outside
SSH 10.0.0.0 255.0.0.0 inside
SSH 172.31.155.0 255.255.255.0 inside
SSH 65.170.136.64 255.255.255.224 outside
SSH timeout 20management-access inside
dhcpd outside auto_config
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
crypto map outside_map 1 is the VPN address
peer set card crypto outside_map 1 66.170.136.65
card crypto outside_map 1 the value transform-set VPN
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
lifetime 28800tunnel-group 66.170.136.65 type ipsec-l2l
IPSec-attributes tunnel-group 66.170.136.65
pre-shared-key xxxxxoutput
int eth 0/1
close
No tap
int eth 0/2
close
No tap
int eth 0/3
close
No tap
int eth 0/4
close
No tap
int eth 0/5
close
No tap
int eth 0/6
close
No tap
int eth 0/7
close
No tapPeter,
Note that access list names are case-sensitive, so you've actually done something different from what I proposed.
Please do:
no nat (Corp_Voice) 0-list of access vpn
No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list allextended VPN ip 172.30.155.0 access list allow 255.255.255.0 any
NAT (Corp_Voice) 0-list of access VPN
In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.
So if you want to separate you, you will need 3 access lists:
list of access data-vpn ip TESTvpn 255.255.255.0 allow one
voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any
access-list all - vpn ip TESTvpn 255.255.255.0 allow one
access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any
NAT (inside) 0-list of access vpn data
NAT (Corp_Voice) - access list 0 voice-vpn
outside_map 1 match address all vpn crypto card
Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).
HTH
Herbert
-
If you see Firefox full screen can you get a toolbar preferred to appear with the address bar?
When you put Firefox in full screen all toolbars disappear. When you hover over the top of the screen in the address bar and appear bar "open tabs. Is it possible to get the toolbar Favorites to appear as well?
If not, is there another way to access the Favorites without having to close Firefox?
You can do this in two ways. Full screen, press CTRL + I to display the bookmarks in the sidebar (repeat to disable).
- or-
in the top address bar, type Subject: config and press ENTER.
In the filter at the top, and paste the following: browser.fullscreen.autohide
Double click it to change from True to False, and then close the tab.
Full screen, tabs and toolbars subsequently remains visible.
-
I can't get rid of an empty box with the header of Mozilla Firefox.
This rectangular box just won't go away. It lies in the middle of the screen and obscures the rest of the page. I tried to restart unsuccessfully.
Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?
Hi Martin,
In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.
Please visit the following link: a list of cameras that can be attached to Lightroom.
Kind regards
Tanuj
-
I need a serial number to download the edition of Acrobat Pro DC schoolgirl and her teacher for MAC (download). All I have is a product key. I need the serial number to activate. How can I get a serial number? I bought the product download on amazon.com
Hello??
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
How can I restore signal from my Mac Pro to my Viewsonic monitor, connected by VGA?
I have a Pro Mac OSX version 10.7.5 running. Trendy top is a monitor 24 inch Viewsonic, the only monitor connected. Last week, everything was fine. I stopped him all night and the next morning, when I tried to start, there was no signal from the Mac to the screen.
The screen displays a 'No Signal' message.
I checked the entry on the monitor, and it is correctly set to PC.
The computer starts normally. I can hear him do his thing.
The monitor starts up normally. No flashing or spots.
I tried restart, disconnect the monitor from the computer, just stop and unplug it, then reconnected. I tried to plug the old monitor (using VGA connection) and start again, with the same result.
I tried to recall the NVRAM (found the instructions on this site) and it made no difference.
It would be appropriate to get a HDMI cable to connect the?
It seems to me that if the computer does not recognize the monitor, try another cable wouldn't make any difference, but I'm really an 'end user' at this stage and would appreciate any advice.
Thank you!
Try resetting the SMC
Reset the management system (SCM) controller on your Mac - Apple Support
The VGA input and cable works with another computer/device?
The port of exit on the Mac works with another monitor?
What model Mac pro?
What video card is installed in the Mac?
What output port are you helping?
Maybe the video card has failed. If yo have an old Mac Pro with an original which is likely to card
-
I use IOS 9.3.1 and cannot receive mail from yahoo on my iPhone or iPad since May 1. I can still get it on my Macbood Pro. I tried to uninstall and reinstall on my iPhone 6, to no avail. All I have this problem and can help me. I downloaded the application mail to yahoo as a temporary solution, but would prefer to get my mail in the email provided with the phone application. The mail comes to this app from yahoo, so I do not understand what has happened.
Hello
Go into settings of mail accounts account delete that do not work and then add them again.
See you soon
Brian
-
I can't get attached with my Canon 5 d mark ii. Lightroom CC connects with my camera, but as soon as I do a capture, CC loses connection w my camera. Someone at - it similar experiences?
Hi jespern46602476,
I ask you to please take a look at the following article: https://helpx.adobe.com/lightroom/kb/troubleshoot-tethered-capture-lightroom-4.html
Please let me know if it helps.
Kind regards
Tanuj
-
Why can't I attach my Canon 350 d with Lightroom on Mac OS 10.9 5.3
Why can't I attach my Canon 350 d with Lightroom on Mac OS 10.9 5.3
Hello
I wonder, because with the build in the Image Capture program works fine with the same camera setings.
Can you give me some advice?
Thank you
Slavi
Never mind. I double checked and your camera support was dropped in LR 4.1 due to the lack of support for Canon in their SD Kit: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html
You'll need either an old computer Configuration or a new camera to attach. I'm sorry.
Maybe you are looking for
-
There is no diamonds next to the name of the windows in the window menu.
When I reduce a window, I don't see a diamond next to the window menu. I see the diamond next to page name in the menu of the icon in the dock, but not in the menu of the window itself, which is what I use to select windows. Attached are pictures of
-
HP Deskjet 3520e: question for HP Deskjet paper jam 3520e all-in-One Series
I feel when the paper jam in the printer. I tried all the solutions they say to try to release the jam, but it did not work, and the message I get on the printer's "clear transport jam", I would like to know if there is something else I can try out t
-
How to load *.html files saved in folder /res
Hello. I'm trying to load a html file that is saved on a/res/html folder. I have seen a few examples where they use the following code: BrowserField mBrowserField = new BrowserField(); add(mBrowserField); mBrowserField.requestContent("local:///index.
-
Each page is printed with the word 'project '.
CP1525nw All the pages I print, regardless of what program I have prints, prints with the word 'project '. I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark. I'm wasting toner, paper an
-
Color settings is not Lightroom color settings
How are you guys! I'm an amateur photographer and use Lightroom and Photoshop. 99% of my work is done in Lightroom, so I really only use Photoshop rarely when I need to do certain things.It seems that every since ch & LR CC came out, I cannot get my