Can I give print command to the printer HP color of LabVIEW 7.1. ?

Similar Questions

• Can someone give me information on the certification of Toshiba?

  Hello
  Can someone give me information on the certification of Toshiba?
  I'm really interested to take one of them, but I really couldn't find any place to get information.

  By the way, I am in Australia now, so it would be better if there is some information on
  Certification of Toshiba in Australia

  Thank you

  Hello

  What do you mean with certification of Toshiba?
  Do you want to know more about the Toshiba warranty?

• Where can I give Mozilla feedback on the deletion of the following customization options?

  Adding spaces and dividers (seriously my old dividers are still there, but I can't add new?)

  Display of bookmarks in the folder structure (I have a lot of files and a large number of bookmarks. Opening each folder every time I want to use a bookmark takes too fucking time)

  Separating the button reload of the address bar (and the forward/backward buttons elsewhere)
  Right now this button is the one on the right side and is a real bitch to click compared to all the rest.

  I want that Mozilla to add these options in. Where can I get their attention to do? I was using Firefox for these customization options. Without it I will certainly try other browsers.

  The title of this thread, edited by a moderator because of the language. See the rules and lines guidelines .

  Officially, you can give your comments on the site of the entrance. Either:

  • Help > submit your comments
  • https://input.Mozilla.org/

  To make sure that I understand your points:

  (1) adding spaces and dividers

  Do you mean on the toolbar? You should use the extension restaurateur theme for this classic. He adds those back in the Customize dialog box. You can get a link to the extension of this article: How to make the new look of Firefox as the old Firefox.

  (2) display the bookmarks in the folder structure

  You were previously using the bookmarks bar? It is not a separate button that a plus, but you can use one of these to access:

  • Bookmarks toolbar button > view Bookmarks Sidebar
  • CTRL + b

  (3) separating the button reload of the address bar (and the forward/backward buttons elsewhere)

  See #1

• Annex Essbase Studio to the Unix server - can previously enter us command in the Maxl Shell deploy?

  Hello

  I have essbase studio, where cubes are deployed manually on a regular basis to the EAS. Now, we intend to automate it, and our Essbase Studio and Essbase sitting on UNIX. I know that we can call the 'startMAXL.sh' of UNIX shell, but I was wondering, if I automate that, I pre-home/pre-store can do the command deploy somewhere in the script that calls startMAXL.sh and runs this command?

  My new shell script is:

  #! / bin/sh

  echo "the sript is about to invoke an another MAXL shell"

  pathToShell = ' / dataobi/.../bin/ '.

  chmod a + x $pathToShell "startMAXL.sh"

  SH $pathToShell "startMAXL.sh"

  When I run this script, it takes directly to the MAXL > tab and waits for the deploy command to enter. But instead, can he take the deploy command directly starting from somewhere and run it automatically?

  Please help me.

  Thank you

  Gibot.

  You can save the command deploy the Deployment Wizard (or create it manually), then in your shell script that calls startMaxL.sh to add the path and name of your file MaxL after him.

• Can I use OS commands in the outbreak of the oracle

  Hello
  
  I have a question related to the triggers.
  
  Can I run OS level commands in the outbreak of the Oracle.
  
  
  Thank you

  Hello
  Yes, you can run it inside a plsql block. So it should also be possible to relax.

  go from call to OS in Plsql commands this thread, you will come to know how to do it.

  Thank you
  Prakash P

  Published by: prakash on December 13, 2011 04:20

• How can you give an author of the administrative rights on their documents?

  Hey,.

  I'm looking for help regarding the assignment of administrator to an author rights so that the files they download.  I don't see a lot of information out there about this other then the AuthorDelete = true property that's not what I'm looking for.

  I use WebCenter content in collaboration with WebCenter Portal.  A user accesses the repository of document using a document map portlet.  Ideally, when a user downloads a document, they would be able to change the ACL Details advanced in the portal view permissions.

  I'm under WebCenter content/portal 11.1.1.8.

  Any help is very appreciated!

  You can write a rule that adds the author with RWDA privileges to the content being downloaded items. Details for this are:

  Metadata field:

  xClbraUserList

  In accordance with article Derived

  <$if dpaction="" like="" "checkinnew"="" and="" dpevent="" like="" "onsubmit"$="">

  <$trace("#all","#console")$>

  <$trace("Inside the="" if",="" "#console")$="">

  <$UAL="&" &="" duser="" &="" "(rwda)"$="">

  <$trace(UAL, "#console")$="">

  <$if strindexof(#active.xclbrauserlist,"&")="">= 0$ >

  <$trace("Inside if="" with="" acl="" values","#console")$="">

  <$UserValue=#active.xClbraUserList $="">

  <$trace(UserValue, "#console")$="">

  <$ACL=UAL &="" ","="" &="" uservalue$="">

  <$trace(ACL, "#console")$="">

  <$dprDerivedValue=ACL$>

  <$else$>

  <$trace("Inside else="" without="" acl="" values","#console")$="">

  <$UAL="&" &="" duser="" &="" "(rwda)"$="">

  <$trace(UAL, "#console")$="">

  <$dprDerivedValue=UAL$>

  <$endif$>

  <$endif$>

  Try this and report the results.

  Thank you

  Srinath

• How can I give driver back to the Iphone?

  Hello!

  I have NO idea how in the world it happened! I used to be able to plug in my IPhone and it would jump to the top of my ITunes. I pulled up to my ITunes and plugged in my phone. After waiting 5 minutes, ITunes would not read my phone. Then I looked at my devices and printers, and my phone popped up saying it was unknown (which he has never done before). So I have troubleshooted and he said the problem was that my "Base system device is not a driver. I have enough course that I have not changed the settings, so what do I do to give the driver for my phone "back"?
  Help me please!

  Hi AddiJ,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the iphone doesn't is not connected to the computer because there is no base driver, rest assured that we will do our best to answer this question.

  Try these methods and check:

  Method 1:

  Try to use the Windows updates and look for optional updates the driver.

  You can also check the link mentioned to update a driver for hardware below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Visit the following link to find out if the iPhone is not getting recognized on the Windows 7 computer.

  Try these steps and check.

  http://support.Apple.com/kb/TS1538

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Can you give me advice on the maintenance of windows 7 please?

  I have reset my desktop computer windows 7 64 bit to factory settings, but for the first time in 5 years I did not put any software melody in it. in the past, I got tuneup utilities, avg pc tune up, boostspeed, pc tools and norton clean (not all at the same time over the years lol). Anyway, I have been using since restored factory 3 days ago is the cleaning of windows disk 7, defragmentation and basic ccleaner (with no boxes checked only the value default ones). of course, when I uninstalled the * software preload I deleted the registry entries manually as I always do and found the left on the software manually using the Sub tools all research. After much searching around google, the reason for which I have not installed a tune up software is because they have all said that they have done more damage that good which I now believe it is true because my pc is running much better without it. BUT it is slow light, but what I'm asking, it is, is what I'm using enough or there at - it all the other tips you can give? Thank you very much

  As you've found third tune up utilities can and are causing problems.

  Do not use the module registry CCleaner

  Theres no point in removing reg entries, it does nothing for the performance

  Disk Cleanup and defrag you just use

• How to create a stop button to send commands via the serial port and finish labview vi?

  I want to send two commands on my camera, the first to stop the execution and the second to get out of the remote control mode. This is done on RS232. What I want is a way to put this in my existing VI that tells the device to run. Now if I stop the program, that the devices just run the last command unless I have stop manually. How can I set up a stop button that are not sent to all orders except in such a hurry? I tried the structure of the case, but didn't know how to put a part of 'status quo' If island stops in the while loop is not pressed the button.

  
  

• How Illustrator can crossed fast? (as 'select the fill - same - color")

  Hello. I have a curious.

  If I want to select objects that same color to fill in the document, I can use the function "select fill - same - color" in Illustrator.

  It's so fast. less than 1 second.

  But, if I want to do in Javascript, I can't do it as fast.

  for (i = 0; i < activeDocument.pathItems.length; i ++) {...}

  If the document has 10,000 items, above script cannot complete in same 60 seconds.

  How Illustrator can crossed fast?

  Is there something else?

  Unfortunately not support Javascript. Only the long long way.

  But you can call an action with the CS6 script: select a path in your scipt and call for action (in which is: select same fill color)

  By the way: you could solve your problem last? (http://forums.adobe.com/thread/1310394)

• The palette of colors and LabVIEW RT on cRIO

  Hello

  I have problem with the help of the color scheme for Sound and Vibration toolkit in the VI real cRIO running on the system at the time. When I try to drag and drop control of the color palette in the front that I get the icon: http://screenshooter.net/2243673/ervvuqk . Is it possible to use this control on the RT system, or should I do the analysis of the order in a different way? I use LV 2011 (with all updates), maybe that's the problem? I can put the paddle in normal VI under Windows without problem.

  Hello.

  Version of LV, you use, is not reason why you can not use this control on your VI. Main reason why you can not use this control you can see if you click the arrow broken on your VI.

  If you do this, you can see explanation: "'Colormap' XControl: XControl Colormap not supported for the current target".

  Therefore, the RT target that you use does not support this function. It's resonable because usually we need for the presentation of data on the host Party, and not on the RT of the code part.

  I hope this answer will help you.

  Best regards

  Sofija

• How can I give the permission to open the files after a complete transfer of an MBA

  I transferred my old macbook 2008 an MBA from 2014 and user files cannot be opened because I do not have permissions. How can I give permission - I'm the admin.

  The usual way to transfer content to a new Mac is to use the installation wizard: move your content to a new Mac - Apple Support. Which warp any permissions issue that can come from other file transfer methods.

• Run the command in the comments - vRO options?

  Hi, I am currently using vRo to run a script simple powercli with 'invoke-vmscript"to run a command at a prompt linux once it is supplied of vRA (it changes the hosts file). I'm looking for another method to do this, if someone could share their experience please.

  I thought to SSH could help, but I am dependent on having an IP address or the host name when I run the workflow. That is not the case that I need to wait for it to start, get address DHCP and save DNS.

  Does anyone have any suggestions how I could achieve? The PowerCLI works because I can do the name of the computer that went from vRA. However, the script does not work very cleanly and I would find that an alternative with vRO is possible.

  Thanks in advance for any advice

  Steve

  No problem

  Yes, you can easily run these commands with the vRO workflow.

  When you log on to your linux VM you can use the command "which" where the "command/program' is you want to run, so

  "what echo" showing you the executable you call is "/ bin/echo", while passwd is on centos for example "/ usr/bin/passwd.

  Tim

• How can I customize chumby apps in the dashboard?

  [color = #4000FF:2h8jkxao] How can I customize chumby apps in the dashboard? [/ color: 2h8jkxao]

  I tried creating an account @ chumby.com and update applications online, but is not displayed in the dashboard, for example the Netflix apps display/update queue you, see what @ home, new versions and one other application, the Yelp app? When I add those on the dashboard it is said on the lower right corner on 'Customize online @ chumby.com' but how does it work for the dashboard? Someone has an idea?

  I thought about it! log on to dash.chumby.com to manage apps there is a link to customize here.

• How I change the fonts and colors of default return?

  I changed the font and the color of the text through the Tools button and the button options and the tab content. I can't find anything tell me how to change the fonts and colors to the colors and fonts by default. Can you advise me? I use Windows 7 Home Premium OS. Thank you.

  Hi Brenda19605,

  You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a & s = do & r = 0 & s = as

  The default settings for the police are in this article:
  https://support.Mozilla.org/en-us/KB/some%20text%20shows%20up%20bold%20after%20upgrade

  Unfortunately for the default color has no good reference. For the text, but it is black (most lower-left), the background is white (color above left). Unvisited links is blue (column 8, line 5) and the visited link is purple (column 9, line 5).

  Let me know if you need help more!

  Lordfreak