Can I have a second service on the same vswitch console?

Similar Questions

• Cannot set the vmkernel and service on the same vswitch console with 1 NIC

  I'm currently setting up a new VMWare environment, using Starwind on a 2008 server for shared storage.  The question that I am running is, when I put the vmkernel (xxx.xxx.xxx.177) and the Service Console (xxx.xxx.xxx.178) on vSwitch0 with 1 card NETWORK, I can only ping the service console.  We also use a Cisco ESW 540 24 ports switch. StarWind support says they are sure it's the swithch, no fool, what needs to be changed in this respect.  If I put the VMKernel and the Service Console on VSwitches separate with separate NIC, it works fine.  Any suggestion would be appreciated.

  Make sure that the Cisco switch does not have port security enabled and allows multiple MAC addresses on the same port.

  André

• I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  Hi sindres79946597,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

  Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

  Kind regards
  Nicos

• What are the tasks we can perform by using Component Services in the Microsoft Management Console?

  Original title: use MMC

  Can someone enlighten me on component services, found in the administrative tools, including the management console folder. Is their anything that can be done by someone who has no knowledge on this subject, extensive Windows, I use XP (SP3) thank you.

  Hi ratchet.

  Microsoft Management Console (MMC) lets system administrators create much more flexible user interfaces and customize administration tools.

  See this link for the tasks that we can perform using Component Services in the Microsoft Management console.

  With Component Services, administrators can deploy and administer service applications of components through a graphical user interface or automate administrative tasks using a programming or scripting language. Software developers can use Component Services to visually configure routine component and behavior of the application, such as security and participation in transactions, and to integrate components into Component Services applications.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

  Also check out this link:

  Using the Microsoft Management Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

• can't have 2 files open at the same time PS? !!

  I just upgraded to cs3 to cs6.  I open a file photoshop very well, then I click on another PS file so that I can drag a layer from one to the other.  but when I click the second file it opens - but it closes the first file!  This cant be right.  How to make 2 ps files open at the same time?

  User error.

  Just acheck "Documents open as tabs" in Photoshop preferences.

• I can't have two projects open at the same time?

  Is it not possible to open two projects simultaneously in Garageband? Everytime I try it asks to save the current window open and then closes its doors for the creation of a new project. Seems awfully clumsy, and there is an option of the window in the menu at the top of the screen bar, so I must be misunderstanding!

  Unfortunately, you are right. You can have only one project, at a time.

  The 'Window' menu is just to open additional tools, like the window of musical input, or to zoom in and minimize the application window.

• When I click on a tab, the tab will not open, so I can only have one tab open at the same time. How can I fix it?

  I use Firefox for about a year, and I use several tabs all the time. Tonight, when I clicked to open a new tab, nothing happened. Firefox starts and displays the first tab with the site, I've specified, but when I try to open new tabs, nothing happens.

  You probably have an another addon that is the cause.

  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I have 2 different accounts on the same sites. Whenever I go on this site, one of my usernames prefills the field of the United Nations, and I can't access the other account. I can't replace my pre-filled username. Ideas?

  I have 2 different accounts on the same sites. Whenever I go on this site, one of my two (always the same) identifiers pre fills in the username field and I can't access the other account. The Web site legitimately refuse my password. I can't replace my username pre-populated because the second I hit enter to open a session, the initial username is rewritten in its field. Or user names is registered by firefox anywhere in the "Tools"; Options, security, advanced, or fields from the privacy menu.

  I noticed that this Web site has installed a cookie on my computer called "_rememberme" that contains the user name plaguing me.

  This is a Web site that I have access to very sensitive and important information, and I have to have two accounts available at different times.

  Thanks, Joshua
  XP, sp3; FF3.6.3

  This has happened

  A few times a week

  == I added the second account on this Web site.

  You will need to disable that remember me cookie, and make sure that you remove a tick to remember you on this Web site.
  Tools > Options > privacy > Cookies: "show the Cookies".

  You can disable the automatic filling of a name and a password.

  See:
  http://KB.mozillazine.org/Password_only_filled_after_entering_user_name
  http://KB.mozillazine.org/signon.autofillForms

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• Can I create a second service console in ESX 2.5.5?

  Can I create a second service console in ESX 2.5.5?

  Yes, I did in ESX 3. +, but I can not find/check it's ok in ESX 2.5.

  Procedures, orders or comments appreciated.

  ALL POINTS WILL BE AWARDED.

  No, you can not - the service in ESX 2.x actuallys console loads before the vmkernel and has control over its own NETWORK card and the physical memory - in esx 3.x (vSphere) the VMkernel charge first and provides these resources to the service console allowing you to create several service console ports -

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

  I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

  The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

  Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

• Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item

  Allright guys. I'd like to say hi first. I had a huge problem masive. Sonyvegas I, and when I tried to use a keygen, it says Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item"I did everything what I have seen here, run as administrator, I checked the administrator conrol Panel and im, I disabled antivirus (avira), firewall disabled, nothing works! And I would like to know if someoen can use teamviewer? and see what is wrong with my pc. I have win7, x 64...
  my Skype: vladutzrmx
  MSN: * e-mail address is removed from the privacy *.

  Hi XDivine,
  We cannot provide you with help on how to hack software

  Eddie B.

• If we have 2 remote sites with the same shared storage, can we mount a drive shared on remote site?

  Dear Experts,

  If we have 2 remote sites with the same shared storage, can mount us a drive on remote site?

  • Assume that the oracle database is on the shared disk (for example HP 3PAR)
  • Primary Oracle server with storage as a common drive (storage shared on sites geographical apart) have all the files database.
  • failure, it is possible to mount the drive even at the remote site and mount the database oracle it?

  There must be no effect on the as it should the same disk that has dismantled master site.

  Thank you and best regards,

  IVW

  Thanks a lot mseberg

  Is it a design valid ?

  • We have remote sites and want to set up DR. As we only SE pare data is therefore no choice.
  • We think of the SAN replication option.

  Have you ever seen / configured such architecture or design?

  Can you please throw some light on this. Thanks in advance for your ideas.

  Thank you best regards &,.

  IVW

• You can have two stored functions with the same name?

  Hi all

  You can have two stored functions with the same name?

  My version of DB - connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0

  Thank you.

  You can have the same name as long as they are within a package and with different parameters

  create or replace package test_pkg

  as

  function my_func (p1 in number)

  return number;

  function my_func (at number p1, p2)

  return number;

  end test_pkg;

  /

  create or replace package body test_pkg

  as

  function my_func (p1 in number)

  Return number

  as

  Start

  return 0;

  end;

  function my_func (at number p1, p2)

  Return number

  as

  Start

  return 0;

  end;

  end test_pkg;

  /

• Hello, I originally bought CS5 Production Premium for Mac in 2010 and I would now like to move to another machine.  I can't have my serial number on the site because no product seems to be attached to my login.  What can I do?

  Hello, I originally bought CS5 Production Premium for Mac in 2010 and I would now like to move to another machine.  I can't have my serial number on the site because no product seems to be attached to my login.  What can I do?

  Try to contact the Adobe Support via chat and see if they are ready to help you.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Can someone help me? Here's my problem, I typed my redemption code and got my serial number, but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items

  Here's my problem, I typed my redemption code and got my serial number but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items.

  All can help me please!

  First, check your Adobe account to see if the serial number is Adobe ID

  Otherwise, you need to contact Adobe directly

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html