Cannot set the vmkernel and service on the same vswitch console with 1 NIC

Similar Questions

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• Can I have a second service on the same vswitch console?

  I currently have a client with the shortage of nic. I want VLAN its iSCSI traffic but so the Service Console would be unable to talk to the table. Can I add a second service console to the same vswitch as the existing SC and tag its traffic?

  Thank you

  Yes you can just add a second portgroup to SC for the same vSwitch and give it the appropriate tag of VLAN

  Alex

  www.phdvirtual.com

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VMkernel and Service Console in the same vSwitch?

  Hello

  Be aware that this may have been covered elsewhere (and I should be grateful if you would be redirected to the correct answer), but I need clarification on the installer to our servers ESX 4.1. I have a switch virtual vswitch1 with webcam live and test port groups running through a NIC 4 etherchannel trunk to a Cisco switch stack with load balancing of the IP Hash for our virtual machines (works fine).

  Due to limited network adapters, I wanted to know if I could have the VMKernel (vmotion) and the Service Console on the same virtual switch (vSwitch0) but separated by VLAN ID in 2 groups of ports, run through an another etherchannel to our Cisco switches (mounting similar to vswitch1 etherchannel trunk). Are these two functions OK on the same vSwitch?

  I say with this configuration, we will have redundancy with 2 network cards in vswitch0 and traffic will be isolated between the SC and vmotion with VLAN. Im not sure if best practices should have the VMkernel SC on separate vSwitches, or even if the VMkernel and HC would work even as a separate Exchange with an ID vswitch1 VLANS separated to release 2 network cards.

  As a result, I read elsewhere, that a default installation with a switch distributed (that we want to use in the near future) would use a dvSwitch for VMs and a vSwitch for SC and functions VMKernel, separating them, so at this point would be a good idea.

  Any advice would be welcome.

  Thank you

  John

  When I have 2 NICs for network management and vMotion, I use usually 1 vSwitch for them. I configure ports of physical switch as connection ports (no etherchannel), set the VLAN ID on port groups and configure groups of two ports for active / standby. For example, the management network has active vmnic0, Eve and vMotion active vmnic1 vmnic0 a vmnic1, as yesterday. In this way each "service" uses its dedicated uplink unless there is a failure.

  BTW, you should consider installing instead of ESX ESXi, ESX 4.1 is the latest version of ESX. ESXi will only be available in the future and transition from ESX to ESXi requires a fresh install of the hosts.

  André

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• Cannot set the width of the table

  I created a master / detail page set and it seems to work very well, but I'm having a problem with the layout for the master and detail pages. The generated code creates a table that extends to the part right of the page and is too broad. I tried to adjust the table width and the widths of the columns, but these seem to be either ignored or supplanted. The master page is here http://hollisterairshow.com/feedback-suggestions-master.php and as you can see the number 9 of the feedback is far too broad in the master and detail pages.

  I don't see all the CSS settings that might cause these problems. I would really appreciate some pointers on where to find the next. I use Win XP / IE8, but the same problem occurs with Firefox v3.5

  Thank you

  Tony Babb

  You have added the attribute of the table-presentation to thetag and the

  Tag, not thetag.

  CSS attributes generally apply to specific tags. Some, such as the width, widely apply to many tags. Others, such as table-layout, are very specific. Search for the correct use of a CSS property online before applying.

  The table-layout CSS attribute applies to the

  Tag:

  http://www.w3schools.com/CSS/pr_tab_table-layout.asp

  http://www.w3.org/TR/CSS2/tables.html#width-layout

  So add

  #maincontent table {}

  table-layout: fixed;

  }

  Once in your style sheet.

  This rule is all

  tag inside an element with id = "maincontent".

• VLAN Tagging (VST) and VLAN native on the same vswitch

  I'm trying to figure out if its possible to put running the VLAN tagging for a vswitch if our virtual machines are currently in the vlan 1 (vlan native) on our cisco switches. I don't know why it's set up this way, but change is not an option at this time.

  Ultimately what I'm trying to accomplish is setting up a group of servers that differ on one VLAN, but under the same vswitch. I'm assuming that VST is what I need, but I don't know if I can simply specify how vlan 1 as the vlan 1 is not marked on cisco switches and my understanding is that VST requires to carry a label.

  Your help is greatly appreciated.

  NuRD.

  With the vSwitch connected to a trunk on the physical switch port, create the port groups and you need only configure the ID then VLAN for the port groups that do not use of VLAN native. See for example http://kb.vmware.com/kb/1004074

  André

• How to set the simultaneous request completed with warning?

  Hi all:
  How to set the simultaneous request completed with warning in oracle 11.5.9?
  
  
  For example:
  
  I completed an application with "Completed" 'Normal '.
  After I put a condition similar to when xxx > 0 then
  It will complete a request indicates 'Complete' 'warning '.
  
  
  
  My environment is: oracle 11.5.9 and operating system is Linux Redhat 4.0
  
  
  
  Concerning
  Terry

  Terry,

  You can use 'FND_CONCURRENT. Function SET_COMPLETION_STATUS.

  Note: 866194.1 - is there a method to return a 'Warning' to host Language simultaneous program status?

  The Oracle Applications Developer's Guide
  http://download-West.Oracle.com/docs/CD/B11454_01/11.5.9/Acrobat/115devg.PDF

  FND_CONCURRENT. SET_COMPLETION_STATUS
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT.SET_COMPLETION_STATUS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer.

  true copy endorsed XP,

  I have a laptop of 2005 which came with XP. I lent it to a parent and it came back up. I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer. Because if it can't get the bulk of the safety at work. That is what it is.

  Refer to this article to get tips on how to validate your copy of xp.

  http://support.Microsoft.com/kb/307890