Can I have several areas of text on a slide?

Similar Questions

• Can we have several independent star schema in layer of MDB in OBIEE?

  Hi friends,

  I need to create four reports based on four star schema, so we have 4 tables of facts and independent sides associated with each, all the tables are in the same data source, I have to design RPD and I have a few questions:

  • Can we have several independent star schema in a layer of MDB model? If YES then I guess we can create a domain for each in the presentation layer, but if NOT then do we create a separate business for each star schema model?

  Early response will be appreciated, thanks.

  Hello

  The rule is simple:

  1 topic-online 1, 1 business model business model => N areas

  This is the limitation.

  So YES you can have have 4 independent stars in a single MDB, YES you can have 4 domain of the same MDB.

  The point is more in what you want your RPD to looks like planning: there are people who are trying to have a limited number of MDB and so they put in allmost all their stars even MDB, others MDB business sense, so if 4 independent stars means they have 4 different meaning that it would create 4 MDB.

• can I have different music (spoken to explain a slide text) for each different slide?

  can I have different music (spoken to explain a slide text) for each different slide?

  I guess it would be possible, but really it's not a function that can be done easily in Lightroom. I would sugest you look at applications that are designed specifically to create slideshows.

• can we have several houses Oracle versions on single server

  can we have several houses Oracle versions on a single server in Pap and no cars?
  
  appreciate your answers
  
  thnku

  Yes

• Several legends of text on a slide?

  Hi, I have question about several legends of text on a slide in my project. I want to change content of the text caption by clicking on the various buttons on the slide.

  There are 4 buttons slide and in the middle of the slide, there is text caption. Is it possible to change the contents of the legend by clicking the button or is it possible to do different (hide or view different legends etc...)?

  THX martin

  Hi Martin.  Back to the earlier suggestion to use advanced actions, we have used them successfully in a smiilar situation to show and hide things.  As you have discovered, once the button show or hide things, it automatically «continues»  As we found in a previous publication somewhere on this great forum, you can prevent continue it by adding an additional action to your advanced action script.  Here is an example:

  

  The rdcmdGotoFrame - rdInfoCurrentFrame is the key.  Once the peak action is created, make this advanced action the action to perform when a button is clicked.

  I hope this helps.

  Mister C.

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.

• How could hide several areas of text caption on multiple slides at the same time?

  I have a simulation of flash card whereupon entering the slide, you see a text box. When you click a button, the detailed answer is given below.

  I initially put in place of the slides so that the first text box is visible and the second one (the answer) is invisible, with press button giving a command to "show" the second hidden text box.

  The problem is that if a user starts again from the beginning, the responses are already showing.

  I want the slides of "reset" from the beginning so that they behave in the same way they did the first time.

  I tried the following:

  1. in the title of the 'Actions' dialog for the slide, I changed the action appropriate 'input' to hide the text box. The problem is that it sometimes takes a while to do, and you can see the answer for the blink of an eye. Not good.

  2. then, I tried an advanced action that set all the slides to hide the text box, but it only worked to the one being programmed.

  I am using Captivate v5.5.

  Any ideas or tips to solve this problem?

  Thank you!!!

  Two ideas:

  • Place a box of highest point on the upper guide layer so that it covers the areas of text for the first second or so of the slide, and then use your advanced Actions.  This means that the initial presence of flash boxes does not see because sometimes located under the highlight box.
  • Postpone your text boxes by half a second or more on the timeline.  Then during the advanced Actions work that should be hidden, the object has not yet appeared. Again not Flash.

• Can you have several strategies of crypto isakmp on a router?

  I have a router 1841 as a hub for several IPSec tunnels. I have a single ISAKMP policy that looks like this:

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  isakmp encryption key * address x.x.x.x

  isakmp encryption key * address y.y.y.y

  isakmp encryption key * address z.z.z.z

  I want to start using AES as the encryption ISAKMP protocol, but I can't be there to change the other ends of all other tunnels. Can I create an another crypto isakmp strategy 2 and just put the pre-shared key for new connections in this one while I'm migration?

  Thank you

  Chris

  Chris

  You can have several strategies of isakmp on your router. The router will run through them in order until it finds a match. If you just need to add a new policy for isakmp with a number of different sequence, for example.

  crypto ISAKMP policy 2

  BA aes

  AUTH pre-shared

  Group 2

  This will not affect your original isakmp policy.

  Not sure what you mean by putting the pre-shared 'under' the isakmp policy. The key is not related to any person isakmp policy - you can see that the configuration you specify above.

  All you need to do to switch is to configure isakmp on your router 1841 strategy and then move the remote as and when you can. Those that you changed uses AES, you have not yet changed that will continue to use 3DES.

  HTH

  Jon

• I have several fields of text given to binded, I need to concatinate

  Hi I have

  have many data fields text binded, who I have to concatinate all of them to show on a particaular section, the thing is if the data field is null, then it should not appear, I mean if the data field is I get a null value

  my code is as follows:

  this.rawValue

  = xfa.resolveNode("Page7.pre_pri_sec_1").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_2").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_3").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_4").rawValue

  +

  " " + xfa.resolveNode("Page7.pre_pri_sec_5").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_6").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_7").rawValue

  +

  " " + xfa.resolveNode("Page7.pre_pri__sec_8").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_9").rawValue + " " + xfa.resolveNode("Page7.pre_pri_sec_10").rawValue etc... ;

  If some fields has no value, then it is shoing as "null", how do I get rid of this null,... ? and if no field has no value there is a space left for her.

  can someone help me on this...

  Thanks in advance

  You'll check NULL values on each field. For example, you can add the following to calculate the target fiield event

  Form1. Page7.resultstr::calculate - (JavaScript, client)

  var str = "";

  If {(Page7.pre_pri_sec_1.isNull)

  Str = str;

  }

  else {}

  Str = Page7.pre_pri_sec_1.rawValue;

  }

  If {(Page7.pre_pri_sec_2.isNull)

  Str = str + "";

  }

  else {}

  Str = str + "" + Page7.pre_pri_sec_2.rawValue;

  }

  If {(Page7.pre_pri_sec_3.isNull)

  Str = str + "";

  }

  else {}

  Str = str + "" + Page7.pre_pri_sec_3.rawValue;

  }

  .....

  If {(Page7.pre_pri_sec_10.isNull)

  Str = str + "";

  }

  else {}

  Str = str + "" + Page7.pre_pri_sec_10.rawValue;

  }

  this.rawValue = str;

  Steve

• can we have several files/tables as target in an ODI of oracle interface?

  Hello
  
  My requirement is to extract data from an Oracle table and a table of Netezza (multiple sources) then I will load it in a .dat file and also an oracle (multiple targets) table. Is it possible in an ODI interface?
  
  Concerning
  Bolo

  Hello

  You can't have more than one target datastore ODI with the current version of 10g.

  Thank you
  Fati

• Entrance area of text on a slide in verification of knowledge?

  Well, argh. I had just figured out how to do a clever text search thing when Captivate threw another monkey to me key.

  The ultimate goal of the project I created must have the students looking graphs by searching for them in a simulation of what they would use in real life and then use this information to answer a question. I got my graph search prototype working, then created a slide to check knowledge with the question. I went to re-implement my prototype on the question slide, and... Captivate allow you to add boxes for entering text on slides KC? Why? I mean, I guess that the answer is 'somethingsomethingSCORM', but I don't even have this entry to have a SCORM ID, I just need to be there and readable by a tip action.

  So now I feel like I'm screwed because Captivate says "stupid, why would you do? Obviously I am a little annoyed right now, but maybe someone can help me?

  
  

  As far as I can tell I have to find a way either:

  • Have a dimmable (in fact, it should not even be dimmable with respect to reporting to an LMS, just able to allow users to check their answers) multiple choice question on the same page as a text input box that can take input from the user and be read by a tip action , or...
  • The question multiple choice remember what checkboxes the user has to be checked out, even if they sail away. In this way the question slide could have a link that goes to the slide of the research, which could bind and then return to the question slide. Is not ideal, but it could work. So far, however, when I tried this the boxes checked the user get unchecked as soon as you leave the slide, if the response has been made or not, and that is not acceptable.

  Any suggestions?

  Since I'm on Captivate, it has never been possible to use any interactive object on a slide in question (and a slide to check knowledge is a question slide). This changed with form buttons, which are so far the only interactive object that can be used (limits): buttons on Question/Score 6 Captivate Slides?-Captivate blog

  A text entry box IS an interactive object. Apparently you don't realize that your first idea is impossible as well, TEB can not go on a normal Question slide.

  Second scenario: the selected boxes are stored in the variable cpQuizInfoAnswerChoice quiz system. But it is a reused variable, you will need to keep its value in a user variable before they have been with a different value.

  If you want that this degree of control that personally I would certainly create a custom question slide. Here's an example I created for a colleague to test the interpretation of technical drawings:

  Link score attempts at questions custom - Captivate blog

  It would be much easier now, because it was created before the existence of shared actions.

• Several areas of reversal on a slide, only one works

  Hi all

  Player, is the first time for a long time. I have looked through all the forums and cannot find a solution for this problem.

  I have a slide with six legends of overview, arranged in two rows of three. Under each bearing legend is a regular legend that contains a statement; the Viewer is for the mouse on the statement and the hood will pop up a legend saying that the statement is true or false. After ten seconds, a button appears and pauses for the slide, and the viewer can click on the button to go to the next slide.

  When I saw the project, only the upper left corner of the box works now as expected. Then after ten seconds, the button appears, and five others begin to work very well. One weird thing is that during this first ten seconds, the cursor of the mouse always changes to an icon of the hand on all the bearings, so she recognizes that they are there, but nothing appears.

  The question seems to have to do with the key, but I tried to adjust his timing, his order into piles of layer, I tried to remove the button, I tried to copy all elements except the button to a new slide and I still get the same problem, and buttons start working properly at the ten second mark regardless of where the button is. All rollover captions and rollover areas have identical properties that I can tell. Overview areas are at the top of the layer stack and are not overlap. Top left (on the scene) is still the only one that works correctly, regardless of how I place in the layer stack.

  I tried everything I can think of. Now I humbly turn to you. Photo of my calendar below. Thanks in advance!

  -JB

  

  Ok.  I solved the problem by replacing just all legend of flipping objects.  Something about their needs has been corrupted.

• Can I have several e-mails come in letters and records same mailboxes?

  My father's been using Windows XP Outlook Express. There, several e-mail addresses which all the download in the same Inbox, and then it moves into a whole bunch of files named he created. Currently everything is pop3.

  Can that be set up in Thunderbird? How do we? You can then choose to download an address at a time? On a Mac Pro.

  I see how to configure the identities, then you can choose between them when sending. Which solves the outgoing needs there.

  Once resolved, next question is whether you can do the same thing if they are all defined as IMAP?

  He is very attached to its XP and stressed hoping I knew how...! Thank you!

  In Thunderbird and POP connected accounts, you can set allows them to use the global Inbox in the local folders. You set this in the settings for each account. A built in tool is the unified folders view which reorganizes the display of files and shows a composite view of similar or equivalent records.

  I think with global Inbox and folders such as Sent, Trash, junk and autodefinies all records to be in local folders, your father would have something very close OE in appearance and function.

  Global Inbox is not supported with IMAP. I guess you could invent such an arrangement, but in principle, with IMAP, a file you see in Thunderbird is a mirror of what is on the server. If an Inbox that has been truly synchronized with the connected servers will have to break this rule. If it contained messages from several servers, it couldn't really represent what was in one of them.

  I imitate such behavior by using search folders saved, in which I understand the messages, unread, recently arrived, specific project and so on. But the saved search folders are stupid enough individuals; they don't really sync because they are effectively read-only (from the point of view of the user) and independent account.

• Can I have several LISTS of GO on my e200

  I have an old version 1, 2 gig e250 I like, and I know that I can have only one list to go, which is limiting. I need more! How fighting the latest versions and the increased capacity, the sansa e250 like the concert of 8 and 16? Or the "rocket"? Can get you multi lists on any unit? I have been all over the forums and the community, but could not find an answer. THX

  Also is the wheel on the Fuze touch sensative like a particular brand of Fruit, or is it a standard wheel of sansa?

  The "rocket" GoList that one alone currently has, with one addition: you can now add entire Albums at the GoList; in the case of songs, you can listen to a track while building a separate list.

  The hot ticket is always to build playlists.  I prefer to use MTP mode, as I did not mess with lists format m3u and path problems.  Call me spoiled.

  From the e200, including the venerable v1 device series, you will find the new "rocket" is a real blast!  You are already familiar with the navigation, and the integration of the µSDHC map is a real treat.

  Yet, the e200 is B52 players, a little hard to cook that will give you years of service from SanDisk.

  Oh, and I almost forgot!  The rocket scroll wheel is a wheel 'wobble', which gives you the same exact navigation by 4 points as the e200, with the rotating scrolling feature built into the same wheel.  Either you turn, or give him a press.

  Bob

• Can you have several lead scoring the workflow based on the type of contact Eloqua?

  Hello!  We are preparing to implement Eloqua 10 and I'm working on lead scoring workbook.  I wonder if you can have different lead scoring evoluted based on the type of contact Eloqua?  My company serves four distinct markets and was hoping that lead workflow notation might be different based on what kind of contact I connect to the.

  Thank you!

  Hi Lucie,.

  Yes you can, I would say at the outset you do not add too many criteria, but rather seek to constantly refine and edit your program (s) that you were going to.