Can I install CS6 on the SSD and the same computer HARD drive without losing the license?

Similar Questions

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• How can I backup all my personal stuff to install my system on a new hard drive without losing all my saved information and contacts?

  I have a HDD making noise and I would like to back up my files and folders, windows mail / my email and contacts so that I can install my system on a new hard drive without losing all my saved information and contacts

  backup what option allows me to record the information of e-mail, my files and folders, settings of the computer basically everything but the system itself.

  I have a full factory CD/CD that includes an image of windows vista (hp system recovery discs) but that does not include my email info or the files and folders to restore

  or is it better to centre commercial simple backup windows separately and how can I do this?

  I don't want to lose my contacts and my email saved during the backup process.

  I understand the hardware drivers and additional programs will need to be reinstalled and I have all my disks associated with the addition of software/hardware.

  Thank you
  Original title: windows mail backup

  Hello

  This should help you:

  "How to back up and restore Messages in Windows Mail"

  http://www.Vistax64.com/tutorials/90298-Windows-mail-messages.html

  At the end of this link there are all related links on how to back up your other files, etc.

  And definitely read this Section initially here (click on and go to the other link):

  Tip

  To back up all (accounts, rules of Message and all settings) in Windows Mail, then see the section How backup and Reset Windows Mail here: How to solve the problems with Vista "Windows Mail"

  Your information is the second PROBLEM

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For your general records, it is a good information, too;

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  There is a link to How to restore your files at the end.

  See you soon.

• Can I format the HARD drive without losing data?

  Hi all
  I used the restore CD to solve a problem on my system (blue screen) and everything was formatted... including the partition where I had music etc...

  Is it possible to format my hard drive without losing the data on the partition?

  Hi guys

  To my knowledge it s any recovery procedure, you would use; in both cases the drive HARD will be formatted!
  Using the disc using the Toshiba HDD recovery procedure and recovery HARD drive will be formatted and you will lose the data on the second partition too.

  As far as I know both put the laptop and HARD drive on the same State as on the first day of purchase!

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• I have an iphone 5s and I would like to know if I can transfer photos to an sd card or a direct external hard drive without mydirect without my computer?

  I have an iPhone 5s and I would like to know if I can transfer photos to an sd card or an external hard drive with the help of my computer

  Try a USB port like this:

  https://www.SanDisk.com/home/mobile-device-storage/ixpand

• Satellite 1900-603: formatting the HARD drive without losing data

  Hello!

  I have a laptop of Pentecost 2 partitions in one, I have the OS and in others, I have my data, my problem is I want to format the partition with the operating system without losing my data, I intend to use for formatting recovery CD. Is this possible at all?

  Another question, I bought my laptop on the Switzerland but I am Portuguese is it possible to get an in Portuguese of toshiba recovery cd?

  Thank you

  Hi Rita

  It is of course possible.
  I assume that you installed your operating system on the first partition and all important files are placed on the second partition.
  The recovery procedure contains the standard and expert recovery mode recovery mode.
  You must choose expert mode. Here it should be possible to choose the partition where the OS image must be installed.

• can I install CC on my laptop and my desktop computer?

  I want to install creative cloud on my laptop and desktop. Can I do this with a single plan or what I need to buy two?

  Hi Robert,.

  Yes. You can install the same license on 2 machines.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• How do I install programs I already had and lost due to hard drive problems?

  Seriously.

  If you identify what applications is the present you could get better information.

  Download and Installation Help-
  https://helpx.Adobe.com/download-install.html

  http://www.Adobe.com/downloads/other-downloads.html

• How can I reformat my hard drive without losing my applications like MS Office and Adobe PS?

  I have MS Office 2010 and Photoshop CS5, the last time I had to reformat I had to reinstall everything and lost access to some programs.

  If you reformat, then of course, you need to reinstall everything.  That's why you keep your installation kits and product keys safe.

• Can I install on my MacBook Pro and Windows PC with the same account?

  Hello

  
  

  I have a Mac and a PC (Win), now I think all Creative Cloud purchase, can I install on my OS x and Windows? Or I have to buy a license 2?

  
  

  Thanks to you all.

  
  

  Michael
  

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• I have two question first: is it true that install ligthroom on an ssd and work on it can "burn" or "broke" quickly the ssd? and the second is what I install lightroom 5 2 Mac with a license?

  I have two question

  first: is it true that install ligthroom on an ssd and work on it can "burn" or "broke" quickly the ssd?

  a second is what I install lightroom 5 2 Mac with a license?

  The license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

• I accidentally uninstalled my CS6, and when I tried to reinstall it from my backup got the configuration error: 1... I can't seem to install, I have the license #.

  I accidentally uninstalled my CS6, and when I tried to reinstall it from my backup got the configuration error: 1... I can't seem to install, I have the license #.

  I tried to install on the adobe download page and got an error. Any suggestions?

  Thank you!

  I don't think that you can install by dragging from a backup, you must install actually using the Adobe installation

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Put the original disc in your drive and install

• I need to change my computer and twice the software already installed. How can I continue to use the license CS6?

  I have already installed my CS6 on my pc and my laptop. Now, I need to change my computer.  How can I continue to use the license?

  Hi, you just have to disable it first on your "old" computer before any unistallation. In any application, choose help > Deactivate.

  
  

  See also support Activation & deactivation

• I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve number series, everything is correct. Thank you

  I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve numbers series, everything is OK. Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html