Can I install the OS from the recovery DVD?

Similar Questions

• Satellite L300-1BW - can I use the recovery DVDs?

  is it possible to use the recovery DVD on my laptop TOSHIBA L300-1BW without any recovery / hidden data on my HARD drive?

  As I want to update my player running more space

  Hello!

  I don't know if I understand your question right, but you can use the recovery disk for your laptop on every time Mr. He s not depending on the partition or HARD drive.

  For example, when you replace the HARD drive, you can install the laptop using the recovery disk.

  I hope I could help a bit.

  Good bye

• having the 1935 error code and can not install windows vista from my recovery disc

  I have a recurring error when trying to install all programs (Error 1935).

  and have reinstalled windows using my vista full 23 bits and when installing any program, even a basic program I get the error code 1935. I have a recovery disk, but I don't know how to start to charge and use the recovery disc supplied with my PC
  can someone help please because I am a beginner

  Thank you very much
  Dave

  Each manufacturer is different things about the recovery partition.  You need to contact the computer manufacturer (online - they can publish procedures - or by telephone) for instructions on how to use the recovery disk (there are probably a combination of special keys at boot that activates the process).  Keep in mind that this type of resettlement will completely eliminate your primary system partition, so don't forget to backup your important data until you try it.

  Here is an article on the 1935 error and solution to fix it.  Maybe this will help (he has a little advanced, but so is the problem then do your best to fight the operating instructions).  http://blogs.msdn.com/astebner/archive/2004/11/10/255346.aspx.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• SategoX200 - 21(d): where can I download the recovery DVDs

  Hello

  Anyone know where I can download the recovery for a 200 - 21 d Satego X DVDs. I have a buyed from the Germany, so everything is in German :-(.

  Thank you

  The recovery CD can not be downloaded!
  You can order the CD from recovery of the ASP in your country but I n t think you will get another CD of another language of the OS.
  Usually you can only order the same recovery CD, but if you want, you can ask the provider of service authorized for more details.

  Best regards

• I can't do the recovery DVDs, 'partition not found' Pavilion 23-h027c

  My recovery image "D" seems to be intact, but when I try to burn the DVD of my recovery it says 'partition not found  Do someone had the same problem and that was the solution? I hope that does not have a full recovery. I backed up my files just in case in the "H" drive. Thanks: pdrodliz

  Contact HP support.

  Read the information that applies to your question in this document from HP web.

  There is also a link to the HP support in the document.

• I can't install the external DVD drive windows

  My laptop CD/DVD drive is damaged and unusable. I bought an external drive. I tried in vain to reinstall windows by putting my installation in the new external DVD/CD drive disc, connecting to the computer with the USB cable supplied with the player. BIOS Boot sequence first to the value "CD/DVD/CD-RW' and other devices (device USB storage, internal HARD drive, floppy drive and integrated NIC) were not marked to start." When I restarted the computer a message "no bootable... devices. "came. Same message came when I tried again with the first initialization of parameter on "USB storage device. I tried other options and means, I could think of, but could not install a fresh copy of Windows. My drive is good and works normally. Is there a way I can install new Windows on my computer, USB key or drive external hard external HD or DVD/CD drive?

  Ooops! -Sorry - in this case...

  http://wiki.EeeUser.com/windowsxpusb

  can help

• pavallion15e015: How can I install window OS 8 through recovery dvd

  Hi I m relocation window 8 using dvd but I don't how to do it can u explain to me step by step

  Hello

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the 1 8 Windows recovery disk and shut the laptop computer.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the CDROM (uefi) option and press ENTER - if you are prompted to "Press any key to continue...". "- make.

  The rest of the procedure will give you on the instructions of the screen, including when exchanging the following discs.

  Kind regards

  DP - K

• Re: Unable to create the recovery DVD

  Hello

  Here I once again m.

  The seller told us to create a recovery DVD (CD).

  I go to Toshiba-files and click on create the recovery CD and the programm "told" to insert 1 of 2 DVDs.
  I did.

  But after awhile the laptop end / cut in writing.
  He can't write E:\Boot\fonts\chs-boot.ttf second message, I try a front message, I don't remember, but something like the second)

  So now I can't create the recovery DVDs

  What to do now?

  Thanks for the replies

  Toshiba satellite L550D 13V P * SE (* = I remember - you can see exactly to my other question about catalyst)

  Hello

  The seller tells you good advice. You should do it. I recommend you try a dvd - r blank of high quality like Verbatim or Tdk. You see, creator DVD doesn't accept poor quality, media.

  Read this thread, please:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55751&TSTART=0

• I can't install the modules from the official site of mozilla Add-ons. I click 'Add to firefox' and nothing happens! Help!

  I can't install the modules from the official site of mozilla Add-ons. I click 'Add to firefox' and nothing happens!

  Hello

  Please check if a green icon is added to the left of the icon in the Web site address bar after clicking on Add to Firefox. If it appears, click it, check the message and select the desired action.

  Another reason could be that the extension could block Javascript or other features of the site.

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• I can't install the SP3 from Microsoft Update Center

  I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  jneen420

  Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

  I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

  Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

  Follow the instructions below:

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

  [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

  Wish I had better news for you, Jeannine. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't open videos or change with Movie Maker. Is it because I have a Sony Handycam? He said that there is a lack of "codec". Where can I install the missing codec from?

  original title: help with Movie Maker...

  I can't open videos or change with Movie Maker.

  Is it because I have a Sony Handycam?

  He said that there is a lack of "codec". Where can I install the missing codec from?

  Very frustrating because I've used it before - maybe because I have SP3? But I don't want to uninstall SP3... :-(

  Help, please!

  Thank you!!

  Thanks for the info.

  MPEG files are problematic in all versions of Movie Maker.
  Best bet would be to convert the files to the. WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• I can't install the sp1 or sp2 from the difficulties why on windows xp?

  I can't install the sp1 or sp2 from the difficulties why on windows xp?

  Hi sjones1209,

  1. What happens when you try to install the service pack on the computer?
  2. You receive an error message?
  3. Did you the latest changes on the computer?
  4. How you install the service pack on the computer?

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• Can I install an application from one month to the next?

  Can I install an application from one month to the next? I want to try Indesign CCfor a month or two, so I don't want to pay for a full year. Can I do this?

  Here is a link to a page that contains descriptions for the plans that are available...

  Creative cloud plans

  https://creative.Adobe.com/#plans

• How can I remove the recovery partition from a corrupt HARD drive that I replaced in a laptop?

  I replaced a HDD corrupted in the laptop of a friend and you want to reuse. How can I delete the recovery partition? When I try to use my Windows 7 computer management tool, it will not access? I did a complete player wipe (twice) what the partition is still there and I can't remove it. It's 14 GB of space I want to retrieve and use the HARD drive in another system at a later date.

  Thank you

  Try the command line option:

  Start cmd.exe as an administrator, then inside the window cmd, type

  DiskPart

  then, type diskpart

  list disk

  take note of the correct disc ID to clear

  type

  Select disk x

  (where x is the ID of your disk to erase)

  type

  clean

  your HARD drive will be erased completely

  or you can try the magic of partition:

  http://www.partitionwizard.com/

  or if it does not work:

  http://www.hirensbootcd.org/download/

  Hiren's boot cd and gparted tool available.

  You must create a bootable CD or USB pen as media.