WinXP crash on connect USB-mouse

Similar Questions

• Satellite M30x-174: cooler starts denoising when I connect USB mouse

  Hello

  I bought a toshiba satellite m30x-174 a couple of months, and I have a problem with it.
  When the computer is turned on (without the mouse into the usb port), but not ongoing enforcement programs other than windows, it runs nice and quiet, but when I connect to my mouse starts denoising. I think it's the cooler that begins. Then when I remove the mouse stops denoising again. I tried with different mouse, but it doesn't change anything.

  Nothing changes in the windows task manager when the mouse is connected/disconnected.
  Hope you can help me.
  Concerning

  Hello

  It is very interesting occurrence. I use as external I smile and have him try connect or disconnect. You are absolutely right. In Task Manager there is no change.

  Sorry but I have no explanation for that matter. I hope that the radiator is not too strong. In any case, in my opinion I n t see what a certain kind of problem.

  Good bye

• USB mouse stopped working after system update

  I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)

  When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.

  I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.

  This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.

  The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.

  Any suggestion is appreciated.

  See this similar post semi for some additional options open to you.

  After update, windows 8 pro will not be closed or sleep with connect to internet
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99

  Have you had a look in Device Manager for errors with USB devices?

  Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine.  Restart and let XP rediscover and see if that solves your problem.

  If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.

  Uninstall or reinstall a device
  http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

• Auto disable Synaptics Touchpad when USB mouse is connected

  Hello

  Someone at - it an idea how to move again the function "Auto Disable Synaptics Touchpad when USB mouse is connected.  I found an old entry in a forum that referenced changing a setting in the registry hex 33, and implied that this would make the OPTION become visible in the mouse settings in the control panel.  But it just seems to disable the touchpad while. So I guess that Synaptics have changed things since this 'solution' was published in 2009, I think. .

  I have W7 XPS and version 15.3.22.0 for Synaptics Touchpad driver.

  See you soon

  K.

  SOLVED SOLVED SOLVED!

  All - I read through it and many forums and have found no solution. I thought of it on my own, so I'm happy to share with you!

  This solution applies to those who do not have a touchpad disable button F button at the top of your keyboard and have the Synaptics driver which does not show the option to disable the touchpad when the external device is present. This also applies to those where the registry key update does not work (because it didn't for me).

  Here is the solution.

  1. go to the Dell site and get the latest driver for your touchpad. Install it.

  2. Once installed, go into c:\program files\synaptics\syntp in your windows Explorer.

  3. open the program called DellTpad.exe (there is also a DellTouchpad.exe called - do not use this one)

  

  4. Once opened, click on device settings.

  

  5 and here the old box is down! Just click to make it active and it works like a charm.

  

• USB mouse does not not after update. Windows detects that usb is connected

  after update to windows 8 my usb mouse stopped working drivers are up to date and clean. tried turning off then turning, resettlement, but nothing does. After a few minutes that its connected it also plays the "detected usb device" then removed "usb device" ringtone It can be connected to my problem.

  Hello

  Thanks for the info and sorry for the late reply.

  I suggest you to run the Microsoft fixit and see if it helps:

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Windows crashes when any USB device is connected

  Hello

  I have a laptop Dell Latitude D505 with Windows XP. Recently, whenever I plugged in a USB device, Windows would freeze and I have to hold the power button down to turn it off.  Since then, I tried to replace the RAM, re - install Windows on a new HARD drive and taking the other components (Wi - Fi, CD). I still don't understand why it freezes. Any ideas?
  Thank you very much!

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. have you tried to connect USB devices to a different USB port? If so, they work on other ports?
  3. have you tested the USB devices on another computer?

  Uninstall and reinstall the usb host controller driver and check if the problem persists.

  http://support.Microsoft.com/kb/283658

  I would recommend that you update your BIOS and drivers from the chipset and check if the problem persists.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Trackpad and usb mouse stop temporarily when the power adapter is connected

  It is a very weird, crazy question. It began to happen today.

  Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

  The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

  Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

  Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

• Satellite A80 129 usb mouse problem

  I have MS USB Intellimouse Optical. And if I connect the mouse to the first USB port (under the laptop computer right speaker), the mouse installs and then with the mouse disconnected constantly. As he works for a few seconds then disconnects and reconnects again, constantly. If I connect it to the other three USB ports, all is well. I don't want to use the other three ports for the connection of the mouse, but I want to use the primary, cause of handling convience (DVD-ram opening and limited space on my table). Also I installed the drivers for the Microsoft mouse, but the mouse plays the same.

  So is this hardware or software problem?

  I have WinXP Pro SP2 installed.

  Best regards, Kekec.

  Hi kekec

  Is there a possibility to check this port with another external device? It will be interesting to know if there is problem using some another unit.

  Anyway, in my opinion, it may be just the hardware problem.

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.

• Port Replicator III + very high CPU when you move the usb mouse only in W2k

  Tecra M2 with a port replicator III +.

  It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

  XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

  Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

  Martin

  Huh it will not be easy to find the right explanation for this.
  At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

  Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
  So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

  I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

  Sorry, but I don't think that there is nothing you can do about it.

• The plug-and-play USB mouse will not work on Satellite A100

  Hello

  I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

  Please help the mouse works.

  Thank you very much

  Hello Jayne

  It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

  As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

• Satellite A100-033: disable touchpad when the USB mouse is conencted

  I have a Toshiba Satellite running Vista Home Basic.
  Recently, I had a catastrophic failure of the Windows and had to install it from scratch.

  Before the failure, I had found a few (well hidden) setting that invalidates the touchpad automatically whenever an external USB mouse was connected.
  To the left it works whenever the mouse is disconnected.

  Can someone help me? (He had nothing to do with the Synaptics driver, which does not allow this.)

  Hello

  I can activated and disable this feature in my dashboard-> mouse settings

  In the mouse settings, I choose the device settings tab, and then I can check the option called disable pointing device internal when the eternal USB pointing device is attached.

  Welcome them

• Portege M100: USB mouse is crazy

  Hello

  I want to kill them and disable the built-in mouse of my M100 because it is completely crazy.
  It moves by itself and when I connect a USB mouse and I'm trying to control the cursor, it does not stop the movement.

  In fact, there is a problem with the internal mouse that goes up without control, so I can't use the mouse.
  Plugin a usb mouse does not. I tried to uninstall Manager but he always reinstall automtatically.

  My Bios ACPI v 1.20 version and does not give the possibility to the integrated mouse unable.
  A newer version will give this ability?
  Is there a program that would disable the mouse integrated, so I cannot use the external mouse connected trough usb.

  Thank you very much

  You can disable the mouse very easily. Use the FN + F9 key combination or disable it in the properties of the mouse.

  I just hope that the laptop is preinstalled with image recovery or right mouse drivers.

• Satellite A210 - 11 c PSAEG: Vista SP1 - USB mouse no longer works

  Hello

  I have an A210 - 11 c (PSAEG) with Vista. A few weeks ago and after installing Vista SP1 my mouse USB optical (wired Logitech V100), began to fail - the background lighting of the mouse turns off and the pointer freezes.
  The first time I used to disconnect, then return to the mouse, which solved the problem.

  Later I had to change the USB port as well, in order to make this work. And finally, since yesterday, the mouse has stopped of works not at all on the laptop. Plug it into a USB port, Vista displays a notice of unknown/a device failed, but not more details.

  Moving the mouse over other PC shows the material is ok - the mouse is recognized and work.
  I also tried to connect other USB devices (an MP3 player), which seems to work fine as well.

  So, it doesn't seem to be problem USB Hub.

  Everyone knows about similar problems after Vista SP1?

  Cheers, Ivo Kolev

  Hello

  > Is - anyone experienced similar problems after Vista SP1?
  From my experience, not all devices, drivers, etc. are compatible with the Vista SP1.
  I read many articles about the teething problems

  Have you noticed the same thing without SP1?

  However, I would recommend this;
  Go to Device Manager and remove the USB controllers and USB hubs.
  Reboot the laptop. While Vista again recognizes the USB ports.

  After this short intervention, try connecting the mouse still once

• Satellite A100-062 - USB mouse does not work

  Hello

  I have a Satellite A100-062.

  I've never been able to get a USB mouse to work with her.
  The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually the message material has not installed successfully.

  So I have to rely on the touchpad, the problem seems to be limited to mice only, I've successfully used a USB webcam without incident.
  I tried several USB mouse with the machine exclude a problem with my original mouse.

  Has anyone else had similar problems?

  Thank you

  > So I have to rely on the touchpad, the problem seems to be limited to the mouse only, I have successfully used a USB webcam without incident.
  Looks like a problem with the USB mouse and not with the laptop or with USB ports
  I would recommend testing different mouse and using the other.