Re: Unable to create the recovery DVD

Similar Questions

• Failed to create the recovery dvd set... advice?

  Just got a new laptop dv7-1240us brand.

  When I try to create the recovery DVD, it seems to go through the first creation of dvd, and then gives me the following error message:

  Error detected during the disk check.

  A new drive should be created.

  I have 4 dvd Memorex coasterized this so far.  Is there something I could do wrong?

  This error code is very comman problem do a recovery media. Given that this product is still under warranty call 1-800-474-6836 and talk to the hp tech agent. Basically, explain the tech agent I have tried several times to create my recovery media, but he receives on the disk 1 can you please send them to me it's really frustrating. The recovery media must be sent free of charge.

• Recovery disk for a T130: Re-create the recovery disk

  Hello

  I own a Toshiba T130, white model that comes with Windows 7 x 64, 4 GB of RAM and a DVD player. I recently tried to install a Linux operating system through a process that is automated via a network installation (Shoemaker), which has actually wiped clean the hard drive before installing the system, contrary to my intention at first actually install it on a separate partition, along side windows!

  It happens that (day 1, after having bought the laptop), I have already saved/stored the folder of HARD disk recovery (integer) initially placed on a second partition in Windows 7, on an external USB hard drive, but did not have a DVD or USB recovery media as it is recommended. The content of the file is as follows:

  + HDDRecovery
  + ODDFiles
  | + Start
  | + EFI
  | + HDDPREP
  | + HTMPREP
  | + Sources
  | + Tools
  + OriSetenv
  + Swing
  | 10347XSP.swm
  | 10347XSP2.swm
  | 10347XSP3.swm
  | 1034...
  | 10347XSP8.swm

  I think that these files are what is needed to create a recovery media and I have a need to restore my computer to its original state and recreate my Windows 7 environment. After all, it is here where I get my work.

  So, you guys don't know if I can build a support of restoring these files? If so, what is the procedure?

  Thank you very much
  Waiting for your response.

  -Ilyes Gouta

  As far as I know is now too late for the creation of recovery disks. If I remember well in s manuals is clearly described that you can install OS using only two procedures: using installation of recovery of HARD drive or using created the recovery DVDs (connected external USB optical disc drive).

  I'm 99.9% sure that the installation of the external HARD disk is not possible.

• Satellite L750 - 1 ML-creates false recovery DVDs?

  I posted it somewhere else, butI think that this category is more relevant.

  So, my recently bought L750 - 1 ML seems to have difficulties to produce a work recovery DVDs. Be a performance geek, just after I created the recovery DVD set (no problem was reported during the procedure) I tried to change the HARD disk of 640 GB for an 80 GB SSD. The recovery DVDs I have previously inserted in the DVD player started normally but after a while, he threw the following error:

  Copying F:\ZZImg\15157XSP2.swm to V:\HDDRecovery...
  There is not enough space on the disk.
  0 file (s) copied.
  ERROR: Failed to copy of splitpart or Canadian Red Cross!
  Press a key to continue...

  My first attempt to overcome the problem was to create another Recovery DVD #1, but after repeating the process with the new, I got the same error.

  So I have serious questions here: I paid for my Windows7 (included in the price of the laptop) and yet, it will last only to the point when my HARD drive fails?

  It would be nice to get answer on this.

  I searched the web for jurisprudence apparently and found these:
  http://www.axoloth.com/index.php/astuces/7-Toshiba-CRCS-error-lors-DUN-recovery
  http://www.forumschoixpc.com/viewtopic.php?topic=115983&Forum=6

  Thank you
  IVL

  The error that says: there is not enough space on the disk.

  Because you have turned on the 640 GB to 80 GB SSD HARD drive, I think that the question has something to do with the amount of available space on the SSD drive.

  It would be interesting to know if you can perform Toshiba Recovery with the previous test of 640 GB HARD drive that I think that the recovery procedure will end well.

• Unable to create the disc of recovery on my Equium P300-19O

  I am unable to create a recovery disk. I get an error code: 020150-20-00000000 and the F:106557xsp4.swm file missing message. When you create the disc 1. Two disk does not work either.

  I think it's important to do these recovery disks, but I have already lost 5 discs already. Is there any help that anyone can give.

  Thank you

  The hidden restore partition has been deleted or changed?

  Perhaps the hidden partition was damaged because of a loss of power or something.

  You should test the memory and the disk using Memtest: www.memtest.org and DFT: http://www.hitachigst.com/hdd/support/download.htm

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Unable to create the 3rd recovery disk

  Hello
  I am
  get an error when you try
  to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
  Recovery media errors
  creation. Please try again. »

  Pavilion dv6-6113tx
  number-LZ765PA
  Core i5 W7 home premium
  pls help
  Sohag

  Hello

  Here's another suggestion that may help.

  Start Notepad and let Windows load completely.  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change.  Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.

  Kind regards

  DP - K

• Screen flickers on Satellite L300 and I am unable to create a recovery disk

  Hi all

  I just bought a model L300 PSLB0C 08R08C number.
  I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

  I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

  Second issue with this device, the screen flashes once whenever it is in a shutdown state.
  Number 3, the wireless card disappears from the Device Manager, until I restart.
  Laptop made in China ;-)

  Any suggestions are much apprecaited

  Hello

  It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

  regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

  Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

  concerning

• Satellite L655-11Z: I can't create the recovery disk

  I have laptop Toshiba L655-11Z with Windows 7 Home preinstaled.
  Reminder telling me every 4 days ago make Recovery DVD by Toshiba Recovery Media Creator... I want to do, but I have problem with that.

  When I run Toshiba Recovery Media Creator it ends abruptly with the error:

  It is not possible to find HARD drive recovery file in the second partition of the first HARD drive.
  There is no environment suitable for HARD drive recovery.

  Is is the translation of the Czech, there should be little different in English.

  I did not change anything or whatever it is clear.
  There are always well with laptop, it was new, but I want to have something, if things go wrong...

  Please help me with this problem.
  I find the similar problem in the forum, but it was not resolved because conversation going in a different way...

  > It is not possible to find HARD drive recovery file in the second partition of the first HARD drive.
  > There is no environment suitable for HARD drive recovery.
  > Czech translation is, it should be little different in English.

  He seems a little more so that disk image files are not available on the HARD disk
  This strange because if the laptop is new, the HARD disk image should not be assigned to s
  Are able to recover the laptop using the option of HARD drive recovery?

  Try this:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If this does not work and that the recovery tool will be unable to create a recovery disc, then you will need to order this disc from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• HP pavilion 15 laptop: how to create the recovery partition?

  By mistake, my little brother have formatted the recovery partition. I'm not able to refresh the PC through update & recovery option in the settings of your laptop... I have the unique language of HP Pavilion 15 notebook.windows 8.1. Please guide recreate me the partition...

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that you can't create partitions of recovery if they are deleted. End users cannot do.

  If the computer is originally shipped with Windows preinstalled by HP (OEM of Windows for example), you can buy HP recovery media. They are generally cheap. You can use it to restore your computer to factory default condition. Here's how:

  > > http://support.hp.com/us-en/document/bph07143

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  And once you receive the recovery [DVD or USB pen drive] media, here's how to use it to restore default factory/Windows to a condition:

  > > http://support.hp.com/us-en/document/c03489643

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  If the computer is originally not is not come with Windows pre-installed, but you install on your own after that, then you need to use the Windows installation media to reinstall Windows. You can get Windows installation ISOs from the Microsoft web site and then burn it to a DVD > > https://www.microsoft.com/en-us/software-download/windows8

  > > http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/

  Please, let me know if this helps and works for you. Feel free to post for follow-up questions.

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!