Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

Similar Questions

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Manager Update 4 will not scan or clean up the Windows 2008 R2 server

  I just install a Windows 2008 R2 server, and Update Manager will not analyze it.  It just says: "Failed to scan or clean up SERVERNAME because of operating system not supported or unknown.  I can scan and clean up my plain Windows 2008 servers very well.  R2 is still not supported?

  I do not remember R2 being in the list of supported operating systems, I believe that this is also the case for the 4.0u1 VUM or VUM 4.0u1.1

  You'll probably want to make sure that the release notes, but if the error message says that it is not taken in charge, probably only is not supported.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• VMware Server on Windows 2008 R2 Server Core installation

  Hi guys!

  I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:

  General system error occurred: unable to connect to the virtual machine

  Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.

  Thank you for your help.

  Kind regards

  Jeremy

  I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• Disabling RC4 encryption in the Windows 2008 SP2 Server

  Hello

  I just saw through the 2868725 Ko to disable the RC4.

  According to the article, we need to install the KB update, then we need to change the values of registry keys to disable the RC4.

  However, I could not find the download for the Windows 2008 SP2 server file in the download link

  https://support.Microsoft.com/en-us/KB/2868725

  Any suggestion how to disable the RC4 in Windows 2008 SP2.

  Need help.

  Thanks in advance.

  Here is the link for the Microsoft TechNet forum:
  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Several related to the server forum (not for Desktop/Win7)https://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

• After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

  After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

  Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

  But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

  I am at a loss for the next steps...

  There was problems with the server for updates for a few weeks now...

  Many people say that download and run the Update Agent stand-alone file solves this problem:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  For more information:

  http://support.Microsoft.com/kb/943144

  For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

• Can we install Windows Essential Win7Pro 2012 on domain?

  Dear all Microsoft Expertise,

  Can we install Windows Essential Win7Pro 2012 on domain?

  I try to install it, but it has stuck on 34%.

  Help, please!

  Thank you

  Raymond Cheung

  The website shows parental control is not available for the field PC. Is there an alternative solution to use this feature for field PC.

  Since your question relates to a server domain, you must post in a TechNet forum: https://social.technet.microsoft.com/Forums/windows/en-us/home?forum=w7itprogeneral

• Windows 2008 R2 server slow printing

  We have about 5-6 servers Windows 2008 R2 in our virtual machine environment.  All of these servers are servers very low utilization, and they all work very well.  We have a few domain controllers, a SQL box and a few boxes of web application that is running IIS.  One of these domain controllers is a print server.  The print server works well, but it is very slow.  If you right-click on any printer that is added to any of the customers and go to properties, where the server is the management of print server, the client must wait 30 seconds or more for the upcoming dialog with the properties.  You can click between tabs, but the legs are also slow to react.

  This means that if you make changes to the print job or the margins, for example, it may take a minute of waiting between screens.

  Now, we had a physical Windows 2000 print server that has worked well until we got the VM environment, so I know the problem is in one of a few different areas.

  1. it could be the VM environment.

  2. it may be Windows 2008 R2 server config or the server software itself.

  3 might be x 64 bit cause a problem with 32-bit clients using the box.

  I have excluded #3 by a 32 bit 2008 Server on the VM environment of loading, loading of print management and then by loading a single printer and share it.  The problem is still there on the current server.  My next step is to try Windows 2003 server in virtual machine environment, but before I do, I want to throw this question very curious to the VMWare community.  All I have to do before moving on to more drastic measures?  There must be something I can do to solve the problem.

  Maybe it's the solution.  Will test:

  http://support.Microsoft.com/kb/979394

• Cannot install Windows 2008 Std 64 Bit on VM Machine

  Hello team,

  I'm unable to install Windows 2008 Std 64 Bit on VM Machine.

  Get an error like:

  Windows could not start. A recent amendment of the harddware or the software may be the couse. To solve the problem:

  1 insert the youe Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance.

  file:\windows\system32\boot\winload.exe

  Status: 0xc000035a

  I have traced the CD on the server, but giving this error.

  Kindly help me.

  Thanks in advance.

  Aloha-

  VT turned on in the BIOS of the host?

  Bill

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.

• I can't install windows on MacBook 15 inch 512 GB 2015

  Hello

  I just brought my new laptop I want to install windows on this 10 by bootcamp. I saw a lot of videos on youtube about installing windows on a mac.

  And I have the iso of windows and proceed to installing windows subsequently after that download the file of taking in charge of windows there was an error popup "WINDOWS FILE cannot NOT BE COPYED". Later when I retried but I need to download a media file, so I download the separate media file instead. But how do I add this file to boot camp instead download it again.

  Please help me with it on this error and the Windows Media file. IM using Bootcamp 6.0.1 so I think it's not see option select task during installation windows 10.

  Can I install Windows on mac without having to install the media file. While I can install it later when windows is installed on BOOTCAMP 6.0 NOT the PREVIOUS VERSION.

• Workstation HP Z240 Tower: can I install Windows 7 from scratch?

  Greetings!

  The operating system on my computer is actually win 10 Pro demoted to Win 7 Pro. I want to know if I can install from scratch Windows 7 in my computer using the Windows 7 disc with the computer.

  I was told, the operating system is Windows 10 but it uses an interface of Windows 7. I don't understand the need for this complication. If you can just install Windows 7, so why use an interface? Maybe this computer only works with Windows 10?

  What are you trying to do, as you say that you are already using Windows 7?

  I do not understand your question about "interface."

  The GUI (graphical user Interface) for Windows 10 incorporates most of the features of the GUI for Windows 7 and also of the GUI Windows 8/8.1.

  See: http://www8.hp.com/ca/en/products/workstations/product-detail.html?oid=8354563#! = form tab

  Your computer was preinstalled with:

  Windows 7 Professional 64 (available through 10 Pro 64 Windows downgrade rights)

  and also comes with a license and support for Windows 10 Pro software.

  My recommendation: given that Microsoft will stop supporting Windows 7 in January 2020 - a short period of absence - install Windows 10 to get security-updates for your computer now and after January 2020.

  Suggestion: if you have a "spare" disk drive, disconnect your current hard drive, connect the 'spare' and try to use this support for Windows 7 to install Windows.  That should answer your question about "can I install...". ».

• Can I install Windows 7 on Satellite M50D-A-10W?

  My question is simple:
  Can I install Windows 7 on Toshiba Satellite M50D-A-10W?
  I would stick to my Windows XP but I wanted to upgrade the operating system, and Windows 8 seems kind of funny to me.
  Thanks in advance!

  *@nerix*

  Visit the page of the driver Toshiba UE and the section download M50D-A Satellite.
  You will find Windows 7 drivers

  By the way: you need the AHCI driver to get recognized HARD drive
  Here's the direct link for the driver:
  http://Support1.toshiba-tro.de/Tedd-files2/0/AHCI-20140212133526.zip

• Satellite C650 - 15 X - can I install Windows XP?

  Hello

  Can I install Windows XP on the Satellite C650-15 X, everything will work (drivers, ethernet etc...)?

  Kind regards.

  Hey,.

  > Can I install Windows XP
  Yes of course. Why not? You can install what you want

  > everything will work (drivers, ethernet etc...)?
  You can check yourself on the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Your model is part of the PSC08E series and is therefore all the drivers available and if you can get all the drivers, everything will work! :)

• Satellite Pro A40 can't install windows without using recovery dvd?

  Hello
  I can't install windows xp pro on my A40 Pro sitting unless I have to use the recovery DVDs including family XP Edition pro.
  I own a copy of xp pro, but I just can not format the hard drive either through the xp pro Setup or using third party software.
  all ideas

  Thanks in advance

  Hello

  Maybe you have an old version of your Windows XP operating system in the Microsoft Windows CD.
  I guess you are not able to install the OS, because some updates and SP are missing on the CD.
  You should try to include service packs of MS, and then install the operating system.

  PS: I put t understand why you n t use the recovery CD. The installation is very simple and al Tosh drivers are pre-installed. OK, it s a Home version but there aren't huge differences of Pro