Manager Update 4 will not scan or clean up the Windows 2008 R2 server
I just install a Windows 2008 R2 server, and Update Manager will not analyze it. It just says: "Failed to scan or clean up SERVERNAME because of operating system not supported or unknown. I can scan and clean up my plain Windows 2008 servers very well. R2 is still not supported?
I do not remember R2 being in the list of supported operating systems, I believe that this is also the case for the 4.0u1 VUM or VUM 4.0u1.1
You'll probably want to make sure that the release notes, but if the error message says that it is not taken in charge, probably only is not supported.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
Tags: VMware
Similar Questions
-
My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not. I find nothing in Event Viewer that shows that there is a problem. Please let me know what to do to get the disks appears
Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared
Hi,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps.
-
Why my printer will not scan to my computer, the will says not connected
My hp officejet 6310 all-in - one will not scan to my computer can someone please advise
my printer is connected through USB, when I ran the check he told me to uninstall and re install which I did, but still does not work
-
I'm currently trying to install SharePoint 2013 on 2012 R2 Datacenter Server. I have SQL 2012 with SP1. I tried to install the prerequisite several times and continue to receive an error during the configuration of IIS. Here is the log file:
2015-06-11 16:58:41 - processor architecture is (9)
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - common startup
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
2015 06-11 16:58:41 - the value is...
2015-06-11 16:58:41 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2015-06-11 16:58:41 - try to remove the start task if there is place.
2015-06-11 16:58:41 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2015-06-11 16:58:41 - error: there is no startup task. This is not a continuation after a reboot.
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /SQLNCli:c:\sharepoint2013bits\PrerequisiteInstallerFiles\sqlncli.msi
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - SQLNCli
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\sqlncli.msi
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /IDFX:c:\sharepoint2013bits\PrerequisiteInstallerFiles\Windows6.1-KB974405-x64.msu
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - IDFX
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\Windows6.1-KB974405-x64.msu
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /IDFX11:c:\sharepoint2013bits\PrerequisiteInstallerFiles\MicrosoftIdentityExtensions-64.msi
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - IDFX11
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\MicrosoftIdentityExtensions-64.msi
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /Sync:c:\sharepoint2013bits\PrerequisiteInstallerFiles\Synchronization.msi
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - Sync
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\Synchronization.msi
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /AppFabric:c:\sharepoint2013bits\PrerequisiteInstallerFiles\WindowsServerAppFabricSetup_x64.exe
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - AppFabric
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\WindowsServerAppFabricSetup_x64.exe
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /KB2671763:c:\sharepoint2013bits\PrerequisiteInstallerFiles\AppFabric1.1-RTM-KB2671763-x64-ENU.exe
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - KB2671763
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\AppFabric1.1-RTM-KB2671763-x64-ENU.exe
2015-06-11 16:58:41 - analyze the following command-line argument:
2015-06-11 16:58:41 - /MSIPCClient:c:\sharepoint2013bits\PrerequisiteInstallerFiles\setup_msipc_x64.msi
2015-06-11 16:58:41 - found the following command-line option:
2015-06-11 16:58:41 - MSIPCClient
2015-06-11 16:58:41 - found the following custom file location:
2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\setup_msipc_x64.msi
2015-06-11 16:58:41 - details of the current operating system:
2015-06-11 16:58:41 - the operating system major version number: (6)
2015-06-11 16:58:41 - minor version of the operating system number: (2)
2015-06-11 16:58:41 - Build number of the operating system: (0X23F0 = 9200)
2015-06-11 16:58:41 - the latest Service Pack major version number: (0)
2015-06-11 16:58:41 - the latest Service Pack minor version number: (0)
2015-06-11 16:58:41 - ID of the operating system platform: (2)
2015-06-11 16:58:41 - suites of products available in the operating system: (0 X 190 = 400)
2015-06-11 16:58:41 - operating system product type: VER_NT_SERVER
2015-06-11 16:58:41 - product type: (8)
2015-06-11 16:58:41 - type of OS: (0)
2015-06-11 16:58:41 - configuration of the property sheet for the application.
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Windows Management Framework 3.0
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - PowerShellVersion
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2015 06-11 16:58:41 - the value is...
2015-06-11 16:58:41-4.0
2015-06-11 16:58:41 - a newer version of the above condition is already installed
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Microsoft .NET Framework 4.5
2015-06-11 16:58:41 - read the following DWORD value name...
2015-06-11 16:58:41 - install
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
2015-06-11 16:58:41 - the value is (1)
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - version
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
2015 06-11 16:58:41 - the value is...
2015-06-11 16:58:41-4.5.51650
2015-06-11 16:58:41 - mail .NET 4.5 release is installed
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Windows Identity Foundation (KB974405)
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41-
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Windows identity Foundation\Setup\v3.5
2015 06-11 16:58:41 - the value is...
2015-06-11 16:58:41-6.1.7600.0
2015-06-11 16:58:41 - the above condition is already installed
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Microsoft Sync Framework Runtime v1.0 (x 64) SP1
2015-06-11 16:58:41 - reading version of the following file...
2015-06-11 16:58:41 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2015-06-11 16:58:41 - GetFileVersionInfoSize failed (-2147024894)
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - client native Microsoft SQL Server 2008 R2 SP1
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - version
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Windows Server AppFabric
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - ProductVersion
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\AppFabric\V1.0
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Windows Identity Foundation (KB974405)
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41-
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\Microsoft identity Extensions\Setup\1.0
2015-06-11 16:58:41 - check if the following condition is installed:
2015 06-11 16:58:41 - Microsoft Protection information and Control Client
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41-
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - Microsoft WCF Data Services 5.0
2015-06-11 16:58:41 - read the following string value/name...
2015-06-11 16:58:41 - version
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2015-06-11 16:58:41 - check if the following condition is installed:
2015-06-11 16:58:41 - update Cumulative Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2015-06-11 16:58:41 - read the following DWORD value name...
2015-06-11 16:58:41 - IsInstalled
2015-06-11 16:58:41 - from the following registry location...
2015-06-11 16:58:41 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2015-06-11 16:58:46 - start download/install
2015-06-11 16:58:46 - created the thread for the installer
2015-06-11 16:58:47 - "C:\Windows\system32\ServerManagerCmd.exe" - inputpath 'C:\Users\ADMINI~1\AppData\Local\Temp\1\PreF30A.tmp.XML '.
2015-06-11 16:58:47 - error: cannot install (2)
2015-06-11 16:58:47 - error: [in HRESULT format] (-2147024894)
2015-06-11 16:58:47 - last return code (2)
2015-06-11 16:58:47 - read the following DWORD value name...
2015-06-11 16:58:47 - flags
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - PendingFileRenameOperations
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SYSTEM\CurrentControlSet\Control\Session Manager
2015-06-11 16:58:47 - read the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2015-06-11 16:58:47 - error: the tool was unable to install the Application Server role (IIS) Web server role.
2015-06-11 16:58:47 - last return code (2)
2015-06-11 16:58:47 - options for other diagnostics: 1. find the value of return code 2. Download the prerequisite manually and check the size uploaded by prior Setup. 3. install the prerequisites manually from the location given without any command line options.
2015-06-11 16:58:47 - can't start over
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Windows Management Framework 3.0
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - PowerShellVersion
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2015 06-11 16:58:47 - the value is...
2015-06-11 16:58:47-4.0
2015-06-11 16:58:47 - a newer version of the above condition is already installed
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Microsoft .NET Framework 4.5
2015-06-11 16:58:47 - read the following DWORD value name...
2015-06-11 16:58:47 - install
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
2015-06-11 16:58:47 - the value is (1)
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - version
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
2015 06-11 16:58:47 - the value is...
2015-06-11 16:58:47-4.5.51650
2015-06-11 16:58:47 - mail .NET 4.5 release is installed
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Windows Identity Foundation (KB974405)
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47-
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Windows identity Foundation\Setup\v3.5
2015 06-11 16:58:47 - the value is...
2015-06-11 16:58:47-6.1.7600.0
2015-06-11 16:58:47 - the above condition is already installed
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Microsoft Sync Framework Runtime v1.0 (x 64) SP1
2015-06-11 16:58:47 - reading version of the following file...
2015-06-11 16:58:47 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2015-06-11 16:58:47 - GetFileVersionInfoSize failed (-2147024894)
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - client native Microsoft SQL Server 2008 R2 SP1
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - version
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Windows Server AppFabric
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - ProductVersion
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\AppFabric\V1.0
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Windows Identity Foundation (KB974405)
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47-
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\Microsoft identity Extensions\Setup\1.0
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Microsoft Information Protection and Control Client
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47-
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - Microsoft WCF Data Services 5.0
2015-06-11 16:58:47 - read the following string value/name...
2015-06-11 16:58:47 - version
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2015-06-11 16:58:47 - check if the following condition is installed:
2015-06-11 16:58:47 - update Cumulative Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2015-06-11 16:58:47 - read the following DWORD value name...
2015-06-11 16:58:47 - IsInstalled
2015-06-11 16:58:47 - from the following registry location...
2015-06-11 16:58:47 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2015-06-11 16:58:56 - opening the log file
2015-06-11 16:58:56 - open for user action
2015-06-11 16:58:56 - C:\Users\ADMINI~1\AppData\Local\Temp\1\PrerequisiteInstaller.2015.06.11-16.58.41.logI also looked for a solution of TechNet and found that there is a KB to install (2771431) (located here: https://support.microsoft.com/en-us/kb/2765260?wa=wsignin1.0 ), but when I try to install it I get the following error: "the update is not applicable to your computer. I also tried the second step, if the installation does not work and it has not yet. Any help would be greatly appreciated. Thank you.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
DeskJet 4500 will not scan to PDF
My Deskjet 4500 G510g-m will not scan to PDF. The Solution Center does not show a scanning pane. Printing HP and Scan Doctor indicates that an update is required for the Cener Solution, however, the update link goes to an update to the Pro 8500 and the update will not be installed for this printer. The software has been installed from download the latest driver from the Web site. Uninstalled several times, including from the file bat of the cd. Printer is connected by USB to a Windows 7-64 bit computer.
Hi spmekr,
Welcome to the HP Forums!
I noticed that your HP Officejet 4500 will not scan to PDF on Windows 7, and I am happy to help you with this problem of scanning!
I recommend the following solutions:
- Uninstall the software. Uninstalling the printer software.
- Clean boot the computer. How to perform a boot in Windows.
- Re-install using the printer HP install wizard for Windows.
I hope this helps and thanks for posting!
-
When I try to download my updates, they will not download
Every time I have try and download my updates, which they continue to not download
Hello
Error messages or specific updates that are not download. Below will fix it many General
issues however a better description of what you see could help us help you.Try to disable UAC and then make the bottom - reactivate later.
Panel configuration-Classic view - user accounts - turn User Account Control Off
How to turn User Account Control (UAC) on or off in Vista
http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.htmlTHIS UTILITY MAKES IT EASY TO
http://www.tweak-UAC.com/
Tweak UAC utility - easily put UAC into Silent Mode or POWER------------------------------------------------------
After the foregoing:
Try this 1st to see if it helps, and it should:
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Sorry if I'm repeating myself, but just trying to meet what is needed. The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)
Download size: 2.1 MB
This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.
More information:
http://support.Microsoft.com/kb/976416and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter
Download size: 3.2 MB
Update type: Important
This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I don't know what to do. I'm trying to download a trial version of A.I., but when downloading, my adobe application manager keeps trying to update but will not exceed 10%. I can't access anything on my manager. I tried to re download the program, but the same problem persists. What are my options?
If you just open the Application Manager, it successfully updated?
In Illustrator, you can download setup offline http://prodesigntools.com/adobe-cc-2014-direct-download-links.html (CC 2014).
Make sure you follow the instructions very important on this page.
-
How is it my library of photos guard update and will not be finished
How is it my library of photos guard update and will not simply end. Every day or two again. I'm so frustrated.
Because you have a problem, you need to fix - if you want to fix it need give us more than a problem abstract - you should know what you have and what help is happing\
This article gives the help of writing, a question Manager wrote an effective communities of Apple Support question
What operating system and version of Photos you have? Where are located library and if a disk external hard what format is it and how is it connected? Which exact error message do you get? What has changed since it worked
LN
-
My Canon mp210 printer/scanner will not scan for the top of Tower computer hp pavilion dv7. It will scan directly on paper. It prints also other things coming from the computer. I removed the driver and downloaded an updated driver. Any suggestions?
Thank you
Hello
1 did you change on your computer before this problem?
2. you receive an error message?
You can read the articles and check if it helps.
You can uninstall and reinstall the printer/Scanner and then check.
Add or remove a scanner
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
See also:
Scanning: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions
The problems of scanning
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems
Choose printing options
http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options
-
Photosmart C7280 will not scan
I am running Windows 7, I just replaced a photosmart c6180 with a Photosmart C7280. The C7280 will not scan.
When I use the Solution center, the analysis shows a black with no document screen as someone forgot to turn on the light.
I tried printing and scanning utility, he said I was missing a update on the Solutions Center. I loaded it and I still have
have the same problem. The printing and scanning utility now works without error throughout. Until I loaded the C7280
software I removed all software C6180. I did some research and found that I should use a scrubber to get rid of all the
the previous software. I found a list of what it takes in hp support forum 1380995 and followed to the letter.
I still have the problem. I'm on a 32-bit computer.
Thanks for any help.
I guess that's it. I want to thank you for all your help in this matter and stick with me.
Thanks again.
-
a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image. I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem
Original title: bad image
Scan the PC for malware http://www.malwarebytes.org/antimalware/
-
Canon MP250 will not scan with Windows 7. 2,155,2 error code
Canon MP250 will not scan with Windows 7. 2,155,2 error code
This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.
This is the message that comes with the 2,155,2 Error Code:
Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.
They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.
Also, I get the following message when I plug in the printer:
USB device not recognized.
It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.
Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.
Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?
I tried to install the updated driver manually, because Windows does not find a driver for this printer.
It drives me crazy, slowly. Can anyone help?
Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.
Instead, please answer your original on the subject (this one) thread.
It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)
@BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81
Thank you.
-
J6450 will not scan since the upgrade to snow leopard
My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)
You scan the front of the unit? The software included in Sl does not support that. Also note the HP Scan Pro included in the 10.5 software will not work with 10.6. The 10.5 software and delete the print queue. Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540. You should be able to scan after that.
-
After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
Maybe you are looking for
-
Child family sharing does not place on iPad
#confused... 1. created a child in iCloud - family run on my device. 2. unchecked "allow X to locate your"-If the child can't see mine. 3. on iPad have configuration iCloud to the child's account in settings-> iCloud. 4 looks like other than my posit
-
After the system restore, cannot access my documents that I had in a private folder.
I thought it was a good idea to keep my private documents folder, but now I'm not so sure! After restoring my system with the option which will lose no data, I found all the data that was not in this case. When I click on this folder, I get a messa
-
HP 14-d010TU wireless LAN drivers not working not
Hello I formatted my laptop and now have problems with the right drivers for the wireless and bluetooth, currently using windows 7, I have download this driver support page (link below) and after that I installed the wifi doesn't seem to work, to do
-
Belkin Wireless connections, lack of quick links
Hi all, my wireless connection has worked for centuries with no prob, now every time I have quit or restart my machine, I have to restart my wireless connection via removing the dongle in a usb port and wait ten seconds insert it again as vista windo
-
Remove context menu items get Suggestions and add them to the dictionary
How can I delete the 'get the Suggestions' and the items of the context menu "Add to Dictionary" for an EditField? I request this API targets 4.2 but running this application on 4.7 API (TOUR) presents these two new context menu items. Is it possible