Tecra A2 FN + key does not work properly

Similar Questions

• the BACKSPACE key does not work properly and if I want to enter the same letter twice it takes time between them

  the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them

  Hello

  In what program?

  Don

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• Shift key does not work properly

  Hello - I have problems with my shift key. Some letters will benefit, some will not. Maj doesn t work also for the question marks, dollar signs, brackets etc.

  Can anyone suggest the problem please /-question mark!
  ABCDEFGHIjkllmnopQRSTuvwxyz - it seems to be the keys on the left side of the keyboard!

  Hello!

  I think the best option would be if you connect an external keyboard and test it. You can connect it via USB.
  If you have desktop, take the keyboard and test it on your laptop.

  If the external keyboard works, you need a new internal keyboard. New keyboards are not so expensive then contact ASP and ask for it. ;)

  Good bye

• F11 KEY does not work properly

  Hello.

  The F11 key on my laptop turned off recently.  It was not lit in red when I press it. In addition, the laptop have no sound at all regarless I press F9 or F10 Keys. It's only function when I restart the laptop everytime.

  Product name: HP ENVY 4 - 1127TU

  Operating system: Microsoft 8

  Thank you.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• FN key is not working properly on my Satellite P875 - 32H

  Hello world

  I have problem like many others, FN key is not working properly. Let's start from beginning:

  1. I bought my P875 - 32 H with Win8 64 bit and everything was allright.
  2. after upgrade to 8.1 probles issued many and most of them I solved it, BUT,
  3 recently, I found that the FN key works in combination with
  (a) f5
  (b) f6, f8 (only with media player works, with winamp does not work).
  (c) f12 (I turned off wifi via Control Panel, but the light still flashes),.
  (d) 1 and 2
  (e) or z (US keybord) - keyboard backligth on/off - I have try several solutions based on the forums (install the driver on toshiba support site) but without success. Throught BIOS I turn on backligth but I can not turn off without entering the BIOS.
  (f) space I've ever used this combination.

  I tried on the Microsoft forums, but there is no solutions.

  And another question
  Why my P875 - 32H model is not on the drop-down list on the toshiba support site?

  Concerning

  At first, I have to say that I hope that you have updated your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/
  FN feature keys is controlled by specific tools Toshiba and you need to install or already installed are Toshiba system driver and utility of Toshiba feature key.

  FN + F5 key combination is for touchpad. Did you install driver touchpad correct?
  F6 and F8 are designed to work with media player. In the past (WXP) using small plug-in, it was possible to use it for Winamp. I think that something like that doesn't exist anymore.

  You know that's not easy to say to install this or that and everything will be OK. The feature keys FN is where several things work together.

  Please check the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and install all necessary drivers, tools and utilities for Win8.1.

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• "A" key does not work on Equium A60

  Hello

  I bought my Equium A60 for more than a year.

  I cleaned the keyboard about a month ago and now my key will not work properly!

  I had jumped off the top plastic part off and blew out the dirt and the thing below rubber came out! It normally covers the sensor, it a little attached to it and presses down on it, so that's what makes the letter arrived on the screen! I put on top of the sensor and covered with plastic bits, but it won't work unless I press and press about 60 times! This is not very practical when you try to type fast!

  Could someone help me please! I don't know what to do.

  And A is that you use a lot, so I can't avoid it!
  Its only the key has, so I don't really want to buy a whole new keyboard, although I would do it as a last resort a little to solve this problem. But even in this case, the rubber part does not come with keyboards? !! I would have thought that isn't that high woth plastic letters on? Will it get a technician, paste it on?

  Help, please!

  Thanks in advance...

  Nicola
  x

  Post edited by: nmssxty

  Hi nicola,.

  I can't give you precisely answer how to solve your problem.
  It seems that you will need a full keyboard.
  As far as I know it is possible to also buy only the key caps, but I do not think that a replacement of the key CAP will help you.
  In my opinion, you should ask the Toshiba service partner in your country. Maybe the technician may be able to deal with this issue without replacement of keyboard.
  If this isn't the case, then I guess you need a new keyboard. Don't be afraid, that's not very expensive.
  But as I said at the beginning to seek advice before you buy and replace something.

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• ATI Graphics Driver does not work properly

  All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
  I have checked all the updates of Windows, said that I installed all available updates. Help, please!

  Hello

  First manually check the updated drivers with ATI and ask their support and Forums on all known
  questions. Use the methods to update the following drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ============================================================================

  Other troubleshooting methods would include the boot minimum and others who might help determine
  the cause and eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• My laptop HP keyboard does not work properly.

  My laptop HP keyboard does not work properly. First of all, it makes a clicking dull when I type, second if I type (anywhere) it wont let me repeat a letter or any key back to back with waiting 2 + seconds. It comes with the connected keyboard or a usb keyboard. How can I stop this?

  In the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off.

• Suddenly, IncrediMail does not work properly. When you click on an email that internet Explorer tried to open

  Original title: corruption of the probably the key ".htm" registry is damaged or missing

  Suddenly, IncrediMail does not work properly.  I click on the message and get nowhere.  It seems that it is trying to go to IE and can not find the web page.  I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix.  One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem."  I guess maybe that's a problem with the registry, but do not know how to fix it.

  I can not even do a system restore or reinstall the IncrediMail program.

  For assistance please ask for help in the IncrediMail Forum

  IncrediMail Support Portal:
  http://www.IncrediMail.com/English/help/choose-your-version.aspx

  Directly in contact with the IncrediMail support team, click here

  Cordially,