Can I label virtual copies?
Hello
I'm looking for an easy way to manage virtual copies and what I want to do is to put a label on each virtual circuit, but there is no way to do it. Say I have an image that Kael'thas transformed to my satisfaction and I would like to have a VC be a harvest of 5 x 7 and the other a harvest of 8 x 8. I would like to label as such VC (5 x 7 of the sunset and sunset 8 x 8). Otherwise, I can't tell quickly what represents each CV. This becomes much more time when I have a VCs 6 or 8 of the same image.
Perhaps there is a better way?
Thank you
Tanguero
You must be in the library to get the copy name field, but after you apply your crop just press G to grid, label, and then press D to return to develop and move to your next picture. You already marked for the VC, you can see the copy name above the film or top left covering the photo, if you press the i key a few times to scroll information options.
Tags: Photoshop Lightroom
Similar Questions
-
Virtual copies are stored in the backups? How can I insert a backup in an existing catalog
I deleted a tif image file that I didn't intend, which had several virtual copies of LR, created from it. Virtual copies had a lot of history important that my impression of the preparation of changes to the document. These virtual copies are saved in the LR backup?
If so, how can I insert in the catalog that I use? I did a lot of changes in the two days since my last backup and don't want to lose this story either. Are you suggesting that I do a backup current prior to extraction of files since I last saved? I know I'm supposed to go to the backup location and open the last backup, but how work with the work during the last 2 days?
Any help would be most appreciated. Thank you, TomHuff says:
This may have been a mistake
It was, but not catastrophic.
Photos in Lightroom are defined by a database ID, not a file name, so you cannot rename them in order to be considered of the same picture as before.
So, theoretically, if master and virtual copy pictures are in your backup, you should be able to import all of them (copies of masters and virtual) - make sure that you remove first did re-imported in your catalog and make sure the name of the source file for tif on disc is identical to the front.
Huff says:
- The section has new Photos, which gives 2 choices of file manipulation: a) add new pictures to the catalog without moving them or b) not to import new photos
- Replacement of A changed existing pictures of the article with 2 options: a) nothing or metadata (b) and develop the power only. If you choose this option you can check a box to preserve old settings as a virtual copy.
1. a) add without moving
2. I thought you were only to add backup photos which no longer exist in the catalog (current) target, in which case it should be no replacement.
R
-
How can I move virtual memory on hard drive external?
I use windows xp. I have problems with virtual memory. I have an external hard drive. How can I move virtual memory external hard disk? I get a message that my virtual memory is low. My computer is running very slowly. Is there another answer to my problem?
You can increase virtual memory instead of what you think now... You can find good info on how to do http://www.delete-computer-history.com/increase-virtual-memory.html and http://support.microsoft.com/kb/308417. However, for convenience, I'll include some steps below...
"How to increase virtual memory? ."In Windows XP
1. on start and then click Control Panel.
2. click on performance and Maintenanceand then click System.
3. on the Advanced tab, under performance, click settings.
4. under the Advanced tab, under virtual memory, click on change.
5. under drive [Volume label], click the drive that contains the swap file that you want to change.
6. under paging file size for selected drive, click custom size check box. You can enter the amount of memory you wish to book for virtual memory by entering the initial and maximum size.
7. click on set
When you are prompted to restart the computer, click Yes.
Special note: You must choose the same amount for the initial size and maximum size. This will stop your CPU from the pagefile evolving. "(found in the link above)I hope this helps, if I can be of further assistance, you can try to join the http://www.informationinternetmarketing.com/
-
Source all these virtual Copies?
I do my annual LR Catalog cleanup and have met with hundreds of the hundreds (maybe thousands!) of virtual Copies next to the originals as well as hundreds / thousands of them in the catalogue "Update Photos."
To the best of my memory and knowledge, I've never manually made these virtual Copies and have never exported images with instructions for stacking or any other type of instructions that would generate a virtual copy. But I guess I did SOMETHING. Someone has an idea? I spend an inordinate amount of time deleting those copies. Some of the copies have parameters of treatment. Most don't. ???????
-Steve
Go to all of the photographs reveal the library filter (CtrlF or Cmd F) and then filter the catalog of VCs. You can then remove them more quickly.
How they appear? Not by themselves! You have possibly set them when you created a new collection and chose the option of VC. Otherwise, you may have used a keyboard shortcut. Or are they test copies? See the copy name field - it'll be a paper profile name if this is how they were made.
-
Batch modify virtual copies to teachers
Hi all
I recently merged two catalogs and I'm trying to deal with all virtual copies created by the process.
Basically, I merged my main catalog, which will automatically create xmp in the file, with a catalogue containing many duplicates but with no metadata on them, essentially creating a conflict.
Lightroom processes the conflict by creating virtual copies of the duplicate files and moving all the metadata on them, leaving UN masters in the catalogue and the directory. So now, I have all my ratings, tags, keywords and information of the collection of 8 000 images on the virtual copies, not on the masters...
I want to get rid of the virtual copies and re - write metadata on the masters but can't seem to find an easy way to do it.
That's what I tried so far
1. define the virtual copies as masters
That would be my favorite way to do it and then go and remove the virtual copies safely. Unfortunately, I can't be able to do this on several virtual copies at a time.
2 remove the master
I thought that maybe if I removed the master, the virtual copy automatically take his place. They both refer to the same file... But none. Remove the master, removes them as well. I guess it's perfectly logical on any scenario!
3 save metadata about the file of VC
Unfortunately, you cannot perform this action
4. synchronization of metadata in the stacks by using plugin Syncomatic
This would be to merge the key words, which is an important step! But other metadata, control would replace the VC, the meaning to lose them. Fortunately, you can only choose to synchronize key words, so that's something. The main question here is of all collections. I have to go and add them manually.
That's what I got so far, so I need some inspiration, you guys!
Are there easy ways to do what I did and did not know?
Is there a way to virtual copies of batch changes to the masters?
Is it possible to synchronization metadata with a choice of how to resolve conflicts?
Is there a way to put images superimposed in the collections where appears a single image of the battery? Or any workaround for synchronization of collections quickly? Once again, with the choice of the VC being chosen in case of conflict.
Or any other solutions, plug-ins etc? I would really appreciate your help
I have merged my main catalog, which will automatically create xmp in the file, with a catalogue containing many duplicates but with no metadata on them, essentially creating a conflict. Lightroom processes the conflict by creating virtual copies of the duplicate files and moving all the metadata on them, leaving UN masters in the catalogue and the directory. So now, I have all my ratings, tags, keywords and information of the collection of 8 000 images on the virtual copies, not on the masters...
Rather than trying to fix the result of the merger, you have already done, it might be useful to take a step back and reconsider how you did the merger. (This is assuming that you have a backup two catalogs that allows you to go back to, right?)
To test my understanding, you have two catalogs, call them A and B. B a lot of pictures of A duplicate, and these duplicates have no metadata and are not placed in the collections that they are in A. While in A, you have imported B, by selecting the option Replace: metadata settings and develop. The pictures that were in B but not got merged into A very well. But if a peak has been in the two catalogues, his master had its metadata replaced by B 'empty' metadata, with a virtual copy that is created that contains the metadata of origin. Even worse, that master has been removed collections is, replaced by its virtual copy.
To avoid this, why not just select the option Replace: nothing? In this way, only the photos in B that are not in a will get imported into A.
If my interpretation is not correct, then provide details of the scenario, using the same terms (A and B).
-
I want to try to apply different effects to the image itself, so I made a virtual copy of an image.
1. is this a virtual copy remain in the catalogue until deletion?
2. my virtual copy has all the effects applied to the original image, and there is no available on the virtual copy history to return to the original. I'm trying to make changes in order to compare the two, although I'd rather not have to remove all the effects that I applied to the original, is there a way to get around this?
Thank you.
Hi kat from media,.
1. Yes, the virtual copies remain in the catalog. However, they do not take a lot of space. All that is necessary for a VC is the list of the adjustments you see in the history panel, because it is based on the same original file.
2. it is a more difficult question. As you noted, fist in the historical a VC Panel is "Create a virtual copy", and it carries with it all the settings of the master (but without the detailed steps included in the history).
I can't think a good way to get the steps of the exact story of an original copied on a virtual copy, without taking the steps one at a time manually. However, you can change any effect later (without loss) for both images. So I don't know why you would need from the history list. Can you provide an example of what you're trying to do? Maybe we can find another way.
Mike
-
Hello!
I keep looking for an answer to this anywhere on the web and 3 books, but can't find the answer...
How to identify the virtual copies (in my records) that have already been deleted a collection?
Here's the workflow, and where I'm stuck.
1. I chose a picture and put it in a collection.
2. I did a whole bunch of virtual photos in the collection copies that I tried different modifications.
3. after and during a lot of changes, I have a lot of virtual copies removed from my collection because I decided against the changes after doing some comparisons.
4. when I went the folders to select my next picture to work away and so to add to the collection, I discovered that each of my virtual copies was in the original folder, even if I had deleted from my collection.
5. I really don't want these virtual copies deleted to be in my home folder. They were virtual copies of trial and error and I wanted them to really just be thrown out.
6. how to identify these virtual copies removed-from-the-collection in my folder? File names all look the same, and besides, I want to be absolutely certain that I have selected the right ones. Some of the changes were very minor and would be difficult to see without laboriously go through them one by one.
Thank you very much!!
Anne
No easy answer on fixing the mess other than an individual inspection of the virtual copy can't watching the Images/Edit history to determine which ones that you no longer need.
But to help prevent the problem in the future: when you are working from a collection, you must use ALT + return back to remove a copy of Photo or virtual catalog. With just the key DELETE or BACKSPACE only deletes the photo from the collection.
-
convert images in virtual copies in a collection
When you create collections in LR5 + you create a pointer to the master file. If you make changes to the images in a collection you change the master. To avoid this you can convert images in a collection to a virtual copies that will be virtual copy
I don't know if it was a question? In case, it was...
You can not turn directly copy (convert) an image inside a Collection, in a virtual. A master or a virtual copy (or both) can be added to a collection. There is a 'switch' master status command and copy a version of the given image - but if you have done such an image inside of a Collection version, you also would do the same for the image version outside of the Collection, as well.
If master images have been added to a Collection, it is possible to make virtual copies of those - then that, if this is done by working 'inside' collection, will result in membership (a little) this special collection, can be inherited by the new virtual copies. Images of masters could then be removed from the collection, leaving only copies. These copies would of course also be considered, alongside their masters, when the relevant image file was seen.
As part of creating a new Collection, there is an option to add the images highlighted. Beneath this, is an option for this have to happen in the form of new virtual copies - rather than add the masters of these images to the Collection. Was it that you were talking to the OP?
-
Virtual copies don't appear not
So, go along and make some changes by creating virtual copies and now new copies I do are not displayed. He stopped this and now he's doing it again. I've accidentally made six virtual copies, can it stack them, but would not be desempilement when I right-click. With this picture, I created a virtual copy, but in the grid it appears not at all:
But make other virtual copies of the other day:
I have no idea why this happened. How to make all my photos, including all virtual copies is displayed in the grid? Unstacking is not an option:
I'm so confused. Thank you.
You are in a collection when you create the virtual copy?
You have enabled filters?
-
Dear community,
I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.
At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.
When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.
What should I do also virtual copies get synchronized?
Thank you very mich for your support.
Best regards
Peter
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.
As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.
Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.
-
To find virtual Copies to smart Collections
Is it possible to find virtual copies in collections smart without use "name of the copy is not empty? Basically, I'm using the name of the copy as a version number for all images, including the base image which is the original. But what makes it so difficult to find the actual copies themselves. Any ideas?
Thank you
Is Andy? wrote:
I'll see if a smart collection can work to a saved filter, which allows to correctly identify the real VCs.
Don't know what that means, but if you want "Virtual copy is" metadata available for (native standard Lr) smart collections, it is available through
The only downside is that the metadata are not updated immediately, if you need to 'manage' the update of metadata and/or expectations.
Funny - I just came across the need for this last night - I solved it by ensuring that all virtual copy names are distinguishable master copy names, yet: because of the text metadata from Lightroom treatment of gaps (e.g., space management and bug "Big mallards"), it is really better to have a yes / no rule.
See you soon,.
Rob
-
Oh God, can you PLEASE help me? I can't contact Adobe by phone, m too late and he said everybody is busy with other things, try later... well.
I consider that I could possibly read and NOTHING is useful.
1 made virtual copies, count goes up, can't see them in the library grid, develop, or under the microscope. Thought they were stacked, but when I went to Photo > stacking > the rest is all grey... cannot do anything. "set as master copy" also grayed out. Read somewhere 'preferences for lightroom can be corrupted? I tried to do the thing in the library to correct the preferences: (on moubntain lion 10.8.3), in the user file there is no library... so I then looked up how to find the hidden library, but I can't find stuff to do! And there's a library on my hard drive, but when I opened upward, there is nothing on preferences.
I JUST bought this 2 mos ago - how it can have preferences corrupt when I just started to use it? -used once, then discovered diddn t have good processor in old computer... bought a new computer... took several weeks to get (bought more ram)... now I'm just using for the first time today. Has started to import, but they are all coming photoi missing (when I had lightroomn installed on your old computer, I deleted ITU and photos), then reinstalled and it was migrated to the new computer. I looked at how massive transfer lack of photos and there is NO folder with a question mark, so I have to make hundreds and hundreds can manually - I tell you that I really hate LR4.4? Now I'm hating photography and LR and I am beyond upset. I came back from vacation a month ago and STILL have not been able to process my photos!
Unhappy mother of King Toutankhamon - p.s.PLEEZ help be4 I have a nervous breakdown!
When you have problems not being only unable to see virtual copies, you have "All photographs" selected in the Module catalogue library panel (left)?
-
Virtual copies not found in the Windows folder.
I don't remember having met this before, so I'm going: I just created a virtual copy of some photos of my summer vacation and everything works fine. But when I need to access these photos right window (Windows / my images thats), virtual copies do not appear in my folder YYYYMM. Back to LR if they will appear there with an extension of 1/Copy. Right to the VC, then "Display in explore" will highlight the original folder, the VC is always not there. Part of the frustration is I don't remember what happens before (or) so I wonder if I accidentally changed settings.
Running LR 4.1 under Windows 7 64-bit.
Thanks in advance.
Virtual copies are "virtual". They do not exist in the records; so you can't look into a Windows folder to find them (and in fact, I think it's a bad idea for Lightroom users to browse the folders in Windows in any case, when you browse browsing in Lightroom).
If you remember you could do before, that is, you're wrong to remember, there is never a convenient where the virtual copies appear in the windows.
If for any reason, you need a photo for use outside of Lightroom (a photo, virtual or 'original' copy), you would have to export it.
-
Catalog corruption - virtual copies not properly related to the master
A small set of 36 images in a catalog of 12500 behave oddly and virtual copies do not seem to relate to teachers properly.
Difficult to remember exactly the steps but whose
-Adding an initial selection of 100 + masters to quick Collection
-adjust the selection using color signage, number of stars and marking photo rejects
-create virtual copies of 35 images 4 star pics
-adding virtual methods to other manual collection
-apparent virtual duplicate that appears when I don't think I asked new virtual methods in the collection but must have made
-location of the virtual to reject copies
-1 picture in photoshop twice editing
-various other post-processing edition
In any case I see now in the library panel that 35 photos of master, the 2 files photoshop and the vitrual 1 copies are listed as 1-38, 2-38, etc.. The virtual copies of all but 1, which was added at a later stage, do not be 1 of 2 Although the name of the file is _MG_9999/copy 1 or 2 copy varies from image to image. The images sequence 38 photos 'related' first, then virtual methods and 1 master end when the sort sequence is the time of capture or file name.
Every thing is there but reported links is obviously false and that worries me and I would like to rectify if I can. The catalog is saved every time Lightroom closes but as I was opened and closed several times a day and did not recognize when this corruption happened that I won't really be loading of a succession of backups and lose any changes of post process or other damage. I just realized that I do NOT have automatically write to XMP enabled in the settings of catalog, although I had to have.
I export the record of 1413 masters have been taken from another catalog and resynched. Don't expect much and did nothing.
Anyone any ideas please?
Thank you
Virtual copies don't say '2 of 2', etc. Only the superimposed images say that. Which is probably confusing you is that the VCs are normally created stacked. I would say that your catalog is probably fine.
Ja.
-
Stop Lr count virtual Copies?
In the library filter, gives counties of photographs meet certain selection criteria and this is useful to get a feeling for the content of his portfolio. However, as it creates virtual copies for the various parameters of development and/or form factors, Lr account copies everything virtual. Thus, these photographs more worked on count, which is not what you want in most cases. A way to tell Lr to count all virtual copies and the original photograph as a single photo?
Thank you!
N °
You can use the library to filter to filter the VCs.
Also, can set smart collections that only photos of master shows ('copy name' is not empty). This is the counter still shows yo the number of 'real' image files in the catalog.
Maybe you are looking for
-
Search for embezzlement by conduit
conduit
-
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and
-
There is no any library problem with launch
Hello I don't have fed up with this launch error does not have any library. Whenever I do any application with C++, I get this error. I restart the software and system, but the problem is not resolved. Can anyone know why its happening? Is there a so
-
I am a current user of Lab Manager and plans to move to vCloud Director 5.1.In the laboratory Manager, VMS receive an address external IP assigned from a pool of addresses using NAT closed would be the option. The big complaint is how the external I
-
When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?