Can I move from ESX 3.5 to ESXi 4.1 in a blade 480c G1?

Similar Questions

• Can switch you from ESX 3.5 and ESXi 4.0?

  We have a host in a remote location running 3.5U4 managed by a VC server in our data center.  We would like to upgrade to ESXi 4.0.  There is only the local drive and we anticipate using our VC to manage this host more, we just intend to use the vSphere client.

  So can we close the virtual machine 1, which currently sits on the host and do an upgrade?

  Or should I back up the virtual machine, do a clean install and then restore a virtual hardware and virtual machine / upgrade tools?

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

  Hello jamieorth,

  Upgrades between ESX and ESXi are not supported. You must perform a clean installation.

  See page 25 on attached file.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  VSP4, VTSP4, VCP4

  ITIL Foundation v.3

• Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation?

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  original title: 32-bit to 64-bit XP upgrade

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  Sorry, but no, you can't. A new installation is required.

• Impossible to download silverlight so I can watch movies from netflix

  Original title: download silverlight

  I am unable to download silverlight so I can watch movies from netflix... I have windows vista and I tried to uninstall, but silverlight is not on the list of programs... suggestions?

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-TV/Netflix-in-Media-Center-no-longer-works/307abf18-FA37-496a-bc0d-ae458b052f54

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/unable-to-play-Netflix-DVD-movies-using-Windows/0f212710-D205-4a8f-BA56-8245700dbd17

  It will be useful.

• How can I move from iPhoto to Lightroom 4 11'

  Hello

  I'm looking to start using Lightroom 4 my primary photo editing and management software and was hoping someone can give me a good idea on how to transfer all my images and import them into Lightroom from iPhoto 2011 (I have about 8 000). My biggest concern is not duplicate my files. I don't have an external hard drive so they will remain on my intern. I did not really any changes of my images with iPhoto, so I am not really concerned by the loss of these changes. Any help would be greatly appreciated. I searched the net and found really good solutions or advice. Thank you!

  First thing I would do is to save your images. To do this, you will need to go to file > export. Here, the best option to do is choose 'gender' to be 'original '. This allows what you export to be in its original format. When you click Export, a new window will appear so you can chose your destination. As I said earlier, this will allow you to choose a folder that iPhoto will empty all your images in a without maintaining your current orginzation in regards to events, etc.. It's very well because this backup is just in case something goes seriously wrong. I prefer to use an external hard drive. You could make a folder on the internal drive, but this will create a copy of your images.

  Once your backup is complete. The second step is to get all the images in the iPhoto library while trying to keep everything in its current state. The easier and simpler way to proceed is to use Aperture 3. If you do not now, you can download the 30 day trial to be able to do. Its the safest method I found and interesting to use the trial just for that purpose. Even if you decide to buy it later, or even remove the trial version, the photos will be where you move and opening can always refer to them. The first step of this opening technique is to import your iPhoto library in Aperture. You have several options on how to proceed in this way. Fortunately, opening will reflect your iPhoto library in its structure (events, etc.). Whe Aperture is open, click file > import > then select iPhoto library. A dialog box opens and the iPhoto library is highlighted. In this box, you have the option to choose where you want to store the files. By default, 'in their cuurent location' is selected. Leaving it selected, opening will leave in iPhoto Library and simply refer to them. You need to select is "in the Aperture library." This could take a while, but finally all of your iPhoto events will be transferred in to the opening, and you see in the sidebar appear under the projects & Albums in a folder called events, which is located in a folder called iPhoto library. Each "event" from iPhoto will become 'Projects' in Aperture 3 and will have a yellow icon beside the name of each event/project. (At this point, I don't know if the iPhoto library is deleted and moved, or if it's a copy of it. If we make a copy by iPhoto Library is still there, you can simply delete the iPhoto library and it will remove your photos that would now be double sort)

  The next step is to move the masters in Aperture. What this does is actually allows you to move your events of the bundled file Aperture, but with each event/project in its own folder, you do not have to rearrange thousands of images. In the Inspector on the left pane, you will see that you can open the iPhoto Library folder and see the events folder. Open the events folder and you will see a list of all the events/projects. This process is a bit of your time. Start by selecting your first event, and then click file > Masters to plan to move. When the dialog box opens, will give you the opportunity to choose where the folder will be moved. What you can do is select your username under Favorites, select a photo and put it in there (or create a new folder in the pictures). After selecting your destination, you want to chose the Format subfolder and select the name of the project. What this did that create a folder named after your project/event and put all the photos in this case in this new folder. You can see an example of name of file listed at the bottom for you. Once you have that together, you can select move the masters. Opening will move the pictures when you have selected, keeping them in their event/folder and keep a clean organization. You will notice that the move took place, a little tag icon in each image as bottom right, moved his stating that the images are now referenced in Aperture and not a managed master longer.

  We must continue to do this for each project/event, one at a time. Once you're done, you're done. All files will be organized in their respective folders in the location you have chosen. The beauty of it is that they are already referenced in Aperture, and if you want to continue using it, you don't have to do something else. You can leave it there and just keep adding to the opening you take more pictures. Second, you can now import into LR by selecting them where they are, by clicking Add in the LR import menu. Leaving them where they are and the references as well.

  If you want to add the images as well, go opening IPTC data and in the top menu bar, select metadata > write IPTC metadata to the master. You can do it before or after you reposition the masters. But I would before importing to LR.

  It is the method that I used and it was the most successful without losing any of my organization in iPhoto and do not duplicate one of the images. It seems a little complicated, but considering that apple gives you no choice of in iPhoto, it's the safest way to free yourself of their shit. The important thing to remember when referencing these images in Aperture or iPhoto is to never move any file once its in a folder on your site of photos and already referenced by the program. Later if you want to use iPhoto, you can simply import this kind of things once again, leaving in their location and their SEO in Aperture. Which has its limitations as well, but such is life in the world of apples. You have really no other choice.

  The two other options are to use these two programs: iPhoto2Disk (http://www.iphototodisk.com/index.html) or PhotoShare (http://code.google.com/p/phoshare/). The first, iPhoto2Disk cost 12.99 and is supposed to be able to let you export all from iPhoto in its current state. PhotoShare is free, but I haven't personally used it. I felt more record ranging from the road of opening just because I knew that Aperture communicates well with iPhoto and I can easily get aperture to what iPhoto should have been able to do in export.

  I hope this helps everyone!

• Migrating from ESX 3.5 to ESXi 4.1

  I am planning a migration of ESX 3.5 Uptade 2 to ESXi 4.1 Update 1 in September.  Material welcomes VI environment is in place for renewal of the lease.  I build the new environment vSphere and attach to the same storage shared as the existing ESX VI 3.5.  My plan is the following...

  1. Get and install a new hardware server (C3000 and BL460C G7).
     
  2. Installing vCenter 4.1 (leave vCenter in demo mode to expose all the features)
     
  3. Configure the plugin Update Manager vCenter
     
  4. Install ESXi 4.1 Update 1 on new hosts and add to vCenter 4.1
     
  5. Configure the new Cluster and configure HA and vMotion. (We are allowed for vSphere 4.1 Standard Edition)
     
  6. Linking hosts to Update Manager and sanitize with all updates.
     
  7. Configure virtual networks (host profiles are an option while in demo mode).
     
  8. Fix new hosts of VMFS existing databases.  (Data banks are VMFS version 3.31)
     
  9. Disconnect the Virtual Center 2.5 3.5 ESX host and add them to the new vCenter 4.1.
     
  10. Cold migrate VM ESX 3.5 hosts ESXi 4.1 bed and breakfast hosts
      
  11. Upgrade VMware tools on all guests.
      
  12. Upgrade all the guests computer virtual from version 4 to version 7.
      
  13. Detach the ESX host 3.5 since VMFS data warehouses.
      
  14. Remove the ESX 3.5 hosts vCenter 4.1
      
  15. Install all keys in license vSphere 4.1 (vSphere Standard Edition)
      
  16. Start the VM guests.
      
  17. Close and dismantle the old ESX 3.5 hosts.
      

  Any feedback is most appreciated.  Please let me know if I'm missing something.

  Then, you'd weigh your losses.  Do you have the characteristics of the hardware virtual v7 for these virtual machines or can you live with material v4?  Personally, I needed the changed block tracking which requires hardware v7.  It really comes down to what you need.  I recommend bringing them up to v7 but that's just my opinion.

• Impossible to move from ESX 4.0 update 4.1

  Hi all

  I am trying to upgrade my servers ESX 4.0 to 4.1, but I'm running into an error.

  I did the following:

  (1) download the update1a package and copied to the ESX host in the /upgrades folder

  (2) put the host in Maintenance Mode

  (3) connected to the host via putty

  Navigated 4) in the folder with the copied update

  (5) run the following commands: esxupdate - stage ESX410 - 201010001.zip bundle

  (6) restarted ESX host, again executes the command, still the same error.

  When I run the command, I get the error the server below.

  ESX410-201010001.zip                              #################################################################### [100%]
  The following problems have been encountered in trying to solve the dependencies:
  Does not provide any VIB ' DriverAPI-9, 1' (required by rpm_vmware-esx-drivers - scsi -
  fnic_400.1.1.0.113.2-4vmw.0.1.320092@x86_64)
  No VIB provides "libipmi.so" (required by rpm_vmware - esx-
  apps_4.1.0-0.1.320092@i386)
  Asked rpm_vmware-esx-pam-config_4.1.0-0.1.320092@i386 VIB conflicts with
  the host

  For reference, I'm on link below. I also installed HP system on the server management tools.

  http://communities.VMware.com/people/vmroyale/blog/2009/10/12/single-use-esxupdate-how-to-for-ESX-4

  Thank you

  Smurfette

  The package you have there are a lot of patches for ESX 4.1, you are currently on the 4.0.

  You will need to upload the complete bundle of upgrade to 4.1 from the download site instead of the one you have.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_4/4_0

  If you're upgrading from the command line, there is a bundle of pre-upgrade you will have to install first of all, when you use the Update Manager is not necessary.

  When this is done, you can apply the patches of 4.1.

  You are mixing patches and upgrades.

• Re: Can I move from a 32-bit OS to a 64-bit with a Satellite C650 (PSC12E)?

  Hello world

  I wish that my Tosh Satellite C650 PSC12E Window 7 OS from 32 to 64-bit, is this possible?
  If yes how?

  Thank you in advance.

  You cannot pass, but you can make own Win7 64 bit installation. I checked the Toshiba download page and your laptop model is supported for 64-bit Win7. All the necessary drivers, tools and utilities, you can find and download it from there.

  What should you do? Get the Microsoft installation disc, install the 64-bit version and later to install all the drivers, tools and utilities. If you need help with him let us know.

• Siri can play movies from my iTunes library on my NAS?

  When I ask Siri to play a movie in my iTunes library, he finds him and takes me to the iTunes Store.  I can demonstrate this feature during the announcement of the product, but for some reason that I can't make it work.  Please notify.

  Siri is the region but does not have access to personal libraries

  Research on your Apple TV (4th generation) - Apple Support

  When you are looking for content with Siri or the application of the research, the Apple TV checks these content providers, with more to come soon:

  • United States: Film and television shows in iTunes, HBO GO HBO NOW, Hulu, Netflix, SHOWTIME, SHOWTIME anytime
  • Australia, Canada, France, Germany and United Kingdom: movies and television shows available on the iTunes Store and Netflix
  • Other countries and regions: movies in iTunes

• Why can't move from Windows Vista Ultimate Edition of Windows 7 Professional?

  I installed Windows Vista Ultimate. I bought a copy of Windows 7 Professional (I didn't need all the extra guff - it was useless in Vista, do not be at all an advantage to 7). So why can I not go?

  Hello

  Ultimate Vista to Windows 7 Professional is NOT an upgrade path.

  Windows 7 Ultimate is your choice only upgrade from Vista Ultimate.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Supported upgrade scenarios

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  This is how Microsoft has designed their operating system.

  See you soon.

• How can I move from Vista Home Premium to Windows 7 hp? Is it better to buy the software disk or download the software?

  My Hp Pavilion Elite M9340F desktop PC was the best computer I've ever owned five computers desktop and portable three. Not only use the personal media drive Bay and two bays of lightscribe disc, I upgraded the video card and the power supply because I run also three external hard drives more (which actually a total of six hard drives run continuously).  I want to spend all or just possibly the main hard drive and Windows 7 Home Premium personal multimedia hard disk.  Is it better to buy the disc or download the software?  In addition, how is it difficult to make the switch?  Even with good backups, I have heard horror stories of losing part or all of the files or have things so scrambled that it is almost impossible to find what you are looking for.  ANY help will be greatly appreciated.  Thank you, Mr. w. Dillon * address email is removed from the privacy *.

  Hello

  It's always a good idea to have a paper copy of a disc (for resettlement and repairs).

  And Yes, backup all your data as 'can' happen during an upgrade that is supposed to be easy.

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  And follow these steps first:

  Go to the HP website and see if Windows 7 drivers are available for your make and model computer / laptop.

  http://WWW8.HP.com/us/en/support-drivers.html

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  For other questions about installing Windows 7, there is a Forum specifically for that because it is the Forum of Installation of Vista, you're in.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• After downloading a Uniblue program to speed up my computer, I am unable to start my computer normally, I can't move from safe mode

  I downloaded a program to speed up my older computer, the name of the program is Uniblue Power Suite 2011 German society of Cologne.  The program is listed as Microsoft Partner and have been on the Microsoft web site at least I thought.

  I now can not connect to the computer I get an error message when I boot my computer is in Mode without failure for many of my drivers are not working properly.  I deleted all Uniblue programs, but the problem is not going away.

  Error I get is C:\ProgramFiles\Uniblue\SpeedUpMyPC\PYTHON26. DLL

  Because I'm in safe mode, I can't get windows security to work.

  Any help me get out of Safe Mode would be appreciated.

  Hi Apple,

  You can try to boot from your Installation of Windows Vista disc and try to do a restore to system restore point before you installed Uniblue and check what is happening.

  You can read the following article to do the same thing.

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• I can't move from http to https for a page I've already visited

  I visit some pages that are available in versions both http or https. If I decide to manually switch from one to the other (anyway) Firefox forces back me regardless of the version of the page, I've seen in the past.

  I found that this seems to be caused by the suggestion of location bar. Indeed, if I go to "Privacy-> address bar" and chose to do 'nothing' for the option 'When you use the address bar, suggests' then everything works as it should.

  Indeed, I have not "read carefully the second link. For those interested, the short version is:

  Subject: config-> urlbar.autofill = false

  Of course, the link was a history item or a bookmark, I mentioned that I was 'switching' http <>- https. Also, I mentioned that disable the 'location bar suggestions' the problem disappeared. And also, it goes two ways, from the http in addition to http https to https.

  I see that with urlbar.autofill = true History/bookmarks are 'faster' to access, in this sense, why not. However, the fact that it is almost impossible to visit a "very similar" page one, I visited is not very usable and precarious borderline (ex: you try to change http-> https to connect to a Web site that you visit often).

  In the meantime I'll make sure to have urlbar.autofill = false.

  Thanks TheOldFox.

• If I have several tabs open how can I move from one tab to another using the keyboard? For example to move one window to another we have to type alt + tab keys. How does for tabs?

  Thank you

  Hello

  To move to the next tab, it's Ctrl + Tab or Ctrl + Pg Dn (Page Down). To go on the Forelegs (reverse), it's Ctrl + SHIFT + Tab or Ctrl + Page Up (Page Up) key. More info on this and other keyboard shortcuts here.

• BlackBerry smartphones can not move from t-mobile to O2 (help)

  • I bought a Pearl of a co-worker and on the t-mobile network
  • I have unlocked to work with any network and have been using it on the distribution of the O2 for a while
  • I have now moved to an O2 contract with blackberry data and tried to register my phone via O2email.co.uk but continue to get the message that an account already exists for this PIN
  • I spoke in support of the O2 and they tell me the PIN is attributed to another service provider (that I already know) and the other service provider should free it
  • My colleague has contacted t-mobile and they are telling him that his account has been cancelled and that he cannot see a blackberry internet account
  • I was on the site of BIS t-mobile and entered the PIN code and requested a password and I get a text Message indicating that the user name and password do not exist

  What can I do to get the PIN released so I can refer to the O2?

  The seller or you need to call TMo and ask that the PIN will come out of the old account.

  It is a common problem when users abandon an account leave the PIN on this network.

  While you have unlocked it correctly, the PIN is always related to the old account.