Can I plug projector into a router and wireless it has become?

Similar Questions

• Auto flash drive has appeared on my screen. Since I can't play video, and my system has become very slow. I have Mac OS Lion 10.7.5 and software is up to date. Before that everything worked beautifully. Can you please provide a link then

  Dear Adobe.

  Yesterday, I installed the latest version of Flash Player that car appeared on my screen. Since I can't play video, and my system has become very slow. I have Mac OS Lion 10.7.5 and software is up to date. Before that everything worked beautifully. Can you please provide a link so I can uninstall the latest version only. Thank you. Stephen Kress. Melbourne. Australia

  When you run the uninstall program, it allows to uninstall all versions of Flash Player.

  If you want to revert to an old version after that, get it from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

• Belkin router and wireless card worked very well and then one night they stopped working randomly.

  It's a belkin router and belkin wireless card. It was working fine one night and the next day he does not see the router. I have reset the router and the wireless card. Reset the computer and cell phone, but still no access. The lights are on the wireless card and I got no error messages.

  original title: laptop does not see my network router.

  Hello

  · Who is the service pack installed on the computer?

  You can try the steps he listed in the links: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  You can also run the troubleshooter by downloading the file from the link: focused on troubleshooting Microsoft Windows XP with wireless networks in small businesses or individuals: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=35c7e5ad-59e7-477b-9d27-6a7030e67002&displaylang=en

• change router and wireless network

  After I change provider and wireless router my wireless printer won't connect and print wireless will print with cable but not wireless. What should I do to fix this

  Hi floats,

  You will find that this document contains instructions to install the product in a wireless network using an access point , such as a router . This type of network is called an infrastructure network. HP recommends the type of network infrastructure for a wireless connection to your product.

  Follow the steps outlined in the document below and let me know how it goes?

  http://support.HP.com/us-en/document/c02213840

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• Try to plug it into the router which is already installed and running with the other computers in the House.

  My computer says "Windows cannot find the certificate to connect to the network."  This computer is working - and an administrator.  This person could not help me.  Hope someone here can...

  The 'certificate' this computer is looking for is something that is used in networks wireless business and almost never in home wireless networks.

  The following assumes that you have given to your home network wireless (SSID of the router) "name" which is recognizable as yours and different from the network name to your work.

  The following also assumes that you are using Windows XP service pack 3 and you use to control your wireless Windows Wireless Zero Configuration (WZC) adapter.

  If none of these assumptions are not correct, provide the relevant information.

  If all of the above assumptions are correct, then

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the icon for your wireless adapter and select Properties
  • Click the "Wireless Networks" tab.  This is where you confirm that "Use Windows to configure my wireless network" is checked. If it is not checked, stop here - you need to identify the utility that controls your wireless adapter before continuing. a good place to look is the icons in the Notification area (next to the time display)
  • Select your network (SSID of your router) from the list of "Preferred networks", and then click Properties
  • Click on the "Authentication" tab and uncheck the box for "enable authentication IEEE 802. 1 x for this network. "
  • OK your way out.

  If "allow authentication IEEE 802. 1 x for this network"is checked, but grayed out, so you can't change it, click 'Cancel' to return to the"Wireless Networks"tab and"Remove"the entry of your router.  Then click on "View Wireless Networks", select your router, click Connect and enter your password when you are prompted.

• Which laptops can I plug it into my docking station Dock Mini Series 3

  Hello

  Today, I have a laptop Lenovo T420 and 2 host ThinkPad Mini Dock Series 3:

  Photo 1

  Photo 2

  I would like to buy a new laptop.

  How I know which one I'll be able to plug into dockings?

  Thank you for your help.

  Have a nice Sunday.

  Fab

  T430, T430, T530, W530, and X 230 were the last generation of ThinkPad to use the mini dock series 3.

• How can I integrate IPS into the Sound and Vibration Assistant 6.0?

  I found out how integrate time domain signals to m/s in S & V 6.0 Wizard, but not IPS.  I could scale the signal, but the axis labels will be wrong.  How can I integrate directly to the IPS of the entrance of G?  Also, is there a way to do the same thing for the analysis of frequency domain?

  In the audio wizard and vibration - step vibration level, use

  on the integration tab - select double integration and click export integrated signal

  Now you have a shift of signals in the right units.  Make a spectrum on that and you get a spectrum of integrated signal.

• Make a small change to an old project - how can I know which versions of drivers and RIO etc. has been used for the last good generation?

  If I want to make a small change to a legacy project for years before, I would limit my risk using the same exact versions of LabVIEW, etc. NOR-RIO.  So I check the project from the repo, but I do not know how to check what versions have been used when the last know good generation was carried out.  I don't want to introduce questions by recompiling mass to the latest version.

  What is advised in this case?  I could, before every posting of repo, take a screenshot of the tree of MAX software and save it in the project file.

  Any ideas?

  Rather than create a screenshot of MAX: MAX can create a report for you. You can take all the information expected of her.

• How can I find the games of hearts and solitaire that has disappeared from my XP PC?

  4 or 5 years... all pre-installed games that came with my computer... just disappeared... probably because I am not a Curmudgeon and pushed the wrong buttons.  I miss hearts and different solitaire games.  Is there a free download Microsoft XP, which will reinstall the?

  restore from cd xp

• Whenever I play games online or work on the net with three or four windows open, the computer stops showing physical Memery dump and restarts, it has become quite common now

  WHENVER I PLAY GAMES, BLUE SCREEN IF POSTER AND THEN THE "PHYSICAL MEMORY DUMP" MESSAGE AND THE SYSTEM RESTARTS. HOW DO I FIX THIS

  Hello

  • This happens only on Internet Explorer?
  • What were the changes made before the issue occur?
  • What is the full error message that you receive?
  • What version of IE are you using?

  You can check this link:

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  See also:

  http://support.Microsoft.com/kb/958233

• I can't try to enable the Task Manager, since he has become disabled by the system administrator.

  I have some how disabled the Task Manager in my windows software and have not been able to allow him and everytime I try I get a message that says that the Task Manager disabled by the administrator, and when I search the Task Manager I get a message that says file not found. How can I get the Task Manager enabled again.

  If it is a stand-alone machine and is not part of a domain and that you are the administrator, it is possible that you see signs of a malware infection.

  Tools like Regedit or MsConfig, work for you?

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• router connection to the LAN and wireless

  I have wireless internet, but I like the reliability of the use of an ethernet cable directly to my computer, but he has no internet connection when I plug it into the router. the connection to the local network is visible and I'm connected to it, but that is to say that there is a public link, which is not the case, and I can't change the settings. I'm pretty handy when it comes to computers, but I can't for the life of understand me.

  Hello

  Thanks for posting the question. I've surely you will help find a solution on the issue.

  The internet connection works when it is configured for the wireless?

  Method 1: Clear DNS Cache

  1. click on Start and then type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  3. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  Method 2:
  

  This problem normally occurs when the connection to the local network is not configured correctly.
  Reference: http://windows.microsoft.com/en-US/windows7/Setting-up-a-home-network

  Hope this information helps. Please reply with the status so that we can help you.

• How can I find the network name (SSID) and the chain of security for my network

  I have a wireless network with a printer on it - even if the printer is connected with a wire.  I want my laptop to be able to use the printer wireless to another room - instructions for putting in place early yb requiring the SSID and the security chain.

  Hi petetyler81,

  You can connect to the router manufacturer's website and make sure that the SSID and find the string, otherwise you can contact the manufacturer of the router and check.

  For more information, see the link:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Hope this information is useful.

• Can not get my printer to work - and no way of contacting HP

  OK, I have a mess.  I bought a new printer HP - HP 8600 all-in-one - N911a.

  He set up and worked fine for about a week.  Then I stopped working.  My wife says that she did that hit 'print '.  (in the meantime, I had to replace the hard drive, so I assumed that was the problem).  New drive hard, all re-installed, but I'm having the same problem with the printer.  Its not recognizing/no impression at all.

  I IYOGI they said that the printer must be bad.

  I connect through a USB cable.

  The computer says "unrecognized device" so I know that the cable is good.

  When I try to print the test page, it is just caught up in the print queue.

  I don't think that the printer is bad, I think that some his conflict with the printer stupid trying to be a network printer.  I'm not a respectable.  From time to time, the computer connects to a non-secure local network, but I did not.  I want to just plug in my printer dang!

  Why the world is so difficult?  And when HP stop supporting its products?

  Sorry, I am over 40 so I'm too old for this world and frustrated b/c it really cost me days to try to get all this done.  I swear, I'm going to just use a typewritter...

  OK, I FOUND a number on the HP support.  GUESS what the problem was?

  I plugged the printer into a power strip / surge protector.  It must be plugged directly into the wall.

  He has his own surge protection.

  It would be NICE that the manual says something about this...

  But mark this one RESOLVED!