Can I put my notebooks CPU & GPU?

Similar Questions

• Satellite A300 - CPU & GPU upgrade questions

  Hello everyone!

  I have a satellite A300-1 to 9 (Intel Core 2 Duo T8300, Ati 3650, lcd WXGA 1280 * 800, 2 discs hard etc.) running Windows XP + SP3 + utility Toshiba etc...

  These are my questions...

  (1) can I upgrade the CPU Core 2 Duo P8400?
  (I know that T8300 and P8400 use the same socket)

  (2) can I put my screen WXGA (1280 x 800) with a WXGA + (1400 * 900) or WSXGA + (1680 * 1050)?
  How will this affect the battery consumption?

  (3) having the computer plugged (a/c power), when I close the lid, the computer goes into sleep mode.
  When I open the lid, the computer wakes.
  Unfortunately, the computer is running on battery power is not the case... I opened the lid and nothing happens,
  I have to press the power button for pc to wake up...

  can I fix?

  Thanks in advance...

  Satellite A300's newest model of laptop and I wonder how you feel about this hardware upgrade after so little time to use.
  In General, these upgrades are probably possible, but certainly not supported by Toshiba.
  In other way such radical update as a poster of upgrade is absolutely not logical for me. You probably know how expensive these parts are.

  In my opinion, should you sold your laptop and buy new with exact material you like to have.

  What about the last question? Please check all settings in the control panel and make sure that you have chosen the right option when the notebook is on battery or plugged in.

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Can I put an Equim A110-233 with a 64-bit processor and if so which?

  Hello

  can I put an equim a110-233 with a 64-bit processor, and if so which are compatible.

  Thank you
  Darrell

  Hello

  Update CPU is always a difficult history.
  I think you have a good chance to upgrade the processor as long as you use the CPU of the same CPU family.

  You could check what processors have been used in other portable Satellite Equium A110 and then you could choose the most powerful CPU used in this series.

  In addition, you should check your chipset type. On page Intel you can find details and which processors are supported by this chipset.

• Compaq presario CQ3559IN: CPU & GPU upgrade in my COMPAQ PRESARIO CQ3559IN desktop pc

  Can I upgrade my RAM and GPU for this system? Is there a limit to the (Maximum) upgrade my desktop pc can support? If so what would be the right product to buy?

  Thank you

  Benhur Ar.Jerome

  @jeromebenhur, welcome to the forum.

  Here is the information of CPU/processor upgrade for the motherboard:

  TDP: 95W

  • Motherboard supports the following processor upgrades:

    NOTE: Only the Socket LGA 1156 processors are compatible with this motherboard.

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• What can I put in my Pavilion dv8000, p/n EZ706UA #ABA?

  I would like to get a faster processor and more memory in this old laptop without spending too much $$. It says that I have

  Processor: Genuine Intel(r) CPU T2050 @ 1.60 GHz (2 CPUs)
  Memory: 1022 MB of RAM and I am running XP Pro

  I would like to put it on Win 7, after I get a new memory and a new processor.

  What CPU can I put here, and even for memory, and it is very difficult, or even really not very profitable? I did it on the mainframes of old office, but never in a laptop. Can I even swap on a USB 2 and get a USB 3?

  Thank you

  FRD

  Hello

  There are few things you can and cannot, please see the following link for a similar machine:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/Pavilion-dv8000-upgrade-CPU-RAM-HD-amp-OS/TD-p/783437

  Kind regards.

  PS. I would not spend money on this machine, you can buy a better with a fractons more money.

• Can I put dv7 laptop computers for the backlit keyboard? 6143CL & 4183 CL

  I have two laptop dv7 which are 2-3 years. (Bought at COSTCO - models see below.) Question: Can I put these units for the backlit keyboard? Thank you, Ed.

  My Info:

  laptop dv7 6143CL

  Windows 7

  Product name: HP Pavilion dv7 Notebook PC

  laptop dv7 4183CL

  Windows 7

  Product name: HP Pavilion dv7 Notebook PC

  Hello ElyMayor,

• [W510] crashes during use heavy CPU/GPU | possible overheating

  Hello

  I have a problem with W150 6 - week old I am just unable to provide. I tried a fairly recent game to test the hardware capabilities of my new camera. However, when running this game, it crashes at irregular intervals.

  MACHINE:

  ThinkPad W510, 4389-W1B Type

  Intel i7 Q70

  nVidia Quadro FX 880 M

  4 GB OF RAM

  Windows 7 Pro 64-bit

  SETTING:

  The game in question is 'Mass Effect' (2008) with graphics almost maxed out settings (720 p and maximum of details). The machine has all the latest drivers and BIOS installed.

  BEHAVIOR:

  The machine is appearently under a heavy load of CPU/GPU with the fan at the highest speed. The causes of the accident the screen go blank and feeding the machine in less than a second after a short hard disk activity. The time until the machine hangs when running the game differs between 3 to 30 minutes.

  COMMENTS:

  I installed the tools, namely TPFanControl and SpeedFan temperature monitoring. The CPU does not get like 80 degrees Celsius, the temperature of the GPU also doesn't exceed 80 degrees Celsius. The accident occurs only with this game of 3D acceleration. However, it is the most demanding game I posses. The question seems to be temperature related since it usually takes much more time to plant the device switching on after a long time being turned off, or in a cooler environment.

  SO FAR THE TESTS:

  I have run several tests of stress on the machine, namely of Prime95 (max CPU temperature: 86), FurMark (CPU: 85, GPU: 80 c) and 3DMark. All passed without accidents (when running for about 1,5 hour maximum). I got the latest nVidia drivers installed, as well as the latest graphics drivers approved by Lenovo. I tried other games with resolution 1080 p and maxed out settings, but the accident only with "Mass Effect".

  CONCLUSION DATE:

  Like many, I can tell, when you run the game, CPU or GPU become warmer than during the stress tests. Nevertheless, the problem "seems" related to temperature. The fact that I don't have to plant with any other game machine or a stress test makes me assume that Mass Effect is just wrong with Windows 7 or the material. However, to my knowledge, bad code or bad drivers do not cause such a crude system shutdown.

  Well, I really don't know what o think about it. I don't want to make use of Lenovo support, unless it is really an anomaly in the system. I would need to get along without my laptop for 2 weeks, which is a long time in view of the fact that it is my primary work machine.

  So my questions to the community are:

  1. is it possible that this is a temperature related problem after all? Despite the positive stress test?

  2 is it possible that these accidents are caused by bad drivers or bad programs?

  Tips are greatly appreciated...

  I don't think it's an overheating problem, it is more likely a software/driver problem or a hardware problem. I am inclined to think that it is the last.

  The system should go in a judgment of thermal overload until less than 95 degrees. 80 degrees is on the beach of normal operation for the GPU and the CPU temperature when loading at 100% load.

  Try to disable the Turbo mode, also have you tried to perform a test on the ram?

  In addition, update a bios may be a good idea if you don't have it already done.

• eager to upgrade/repair an HP g6 - CPU/GPU of the 1d60us

  the thing I wonder is if I can improve my A4 3320 M (other wise known as am3320ddx23gx) ether a better AMD or an intel better... Since my CPU/GPU 'killed' itself I wanted to know if instead of simply replacing the part (for $11... pft) I could get something better... but I don't know if a better AMD would work or if a intel (i3/i5/i7) would work... Since both are listed in the list parts in the online menaul

  Yes, if someone could please help me?

  The processor socket type is FS1-uPGA or first-generation FS1 I think

  Your current processor is part of the series "LLano" Mobile AMD processors

  You can select from the following list of processors LLano. Processors Trinity and Richland are 2nd and 3rd generation and use a socket FP2 and FS1R2

  http://en.Wikipedia.org/wiki/List_of_AMD_Accelerated_Processing_Unit_microprocessors#Sabine_-_.22Llano.22_.282011.2C_32_nm.29

  It may be useful

• Can my aspire am3470-uc30p upgrade gpu?

  Can my aspire am3470-uc30p upgrade gpu?

  Oh, ok. You asked if the gpu could be improved, not the cpu. Thank you for pointing this out. Of the record, this has an A8-3800 AMD inside. I don't think this can be improved more. I see that other models with processor A6, but the highest I see here is the A8 processor that you already have. The motherboard is usually designed for certain processors and it seems that it is the highest it can go. I hope this helps.

• can I put my windows 7 32-bit operating system to 64-bit?

  can I put my w7 32-bit to 64-bit? My frend say, my operating system can be upgraded to 64 - bit...

  my current system I got the tools and performance information:
  Reference of the manufacturer-acer
  model - aspire 4552
  total 3.00 GB ram memory - system
  system type 32 bit os
  Number of processor core-2 (amd athlon II P340 2.2 GHZ)
  64-bit capable Yes
  graphics-ati mobility radeon hd 4200
  Thank you..

  Yes, you can install Windows 7 64-bit.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I am using windows 7 home basic 32 bit.i bought the copy under license in August 2012.how can I put my windows 7 32-bit to 64-bit? Wat is the cost?

  I use genuine windows 7 home basic 32-bit.

  I bought the copy under license in August 2012.
  How can I update my windows 7 32-bit to 64-bit?
  or can I put windows 7 32-bit to 64-bit windows 8?
  Wat is the procedure & fees for it?
  pls show me the right way.
  thanx

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit Windows 7: Starter, Home Basic, Home Premium, Professional and Ultimate see here.

• IPod 160 GB Classic is stuck on the apple logo. I have reset several times and I can not put in DFU mode or resets it to take. Done all the help topics that I have seen here and nada... Please help

  help me get the apple logo take off. I reset it, tried and failed to reset. I can't put it in dfu mode. I'm stuck and need help pease. I did everything that was mentioned in other posts similar to this issue.

  That may mean the iPod has a hardware problem, such as a faulty hard drive or the logic board.

  When you do a Reset (press and hold the Menu and Center buttons), going blank at the start before the Apple logo returns the screen to the iPod?  Or do you mean that the Apple logo is 'stuck' and it doesn't go away when you try of the reset?

  Is the "DFU mode" procedure for disc Mode.  Have a look here to confirm that this is what you have tried

  How to put your iPod in disc - Apple Support mode

• How can I put text in front of a form

  Hello I have header and one line below. For the character as j, p, etc. the background is cut by the line; How can I put the text to be in the front of the line? I tried to bring the line.

  Thank you!

  Select your line segment and then organize menu: Section Masters: move Section Master object. This will put this line in the background on all pages, and your text will appear on the line.

  Alternatively, you can consider giving your line transparency more or less color darker, so that it does not interfere with the readability of your character chutes.