Can I read text files in Multisim 11.0?

Similar Questions

• How read text file and decode

  Hi, I have a file which consists of 2 columns, it is first of all time/date stamp and 2nd is ON / OFF text.

  I would like to determine the time when the text is ON or OFF.

  I am not able to analyze the data in separate columns 2 and then read, can someone help me on this?

  The example of the file is attached.

  I was going to throw away the solution, but bob and cruz are probably right, that he is HW.

  What is the problem with your vi above, is that you are matching the model from the OFF, but you don't have a table, so your search through your entire text file and on the OFF first display you text in front of her. You must first create a picture of your spreadsheet from the read text file string. This can be done either by using a string of worksheet function array or as cruz said the spreadsheet file. Im not sure of your desired end result, but from there you can feed in a for loop and find each item ON or OFF.

  That should help you get started.

• close the reference on "read text file" - Ref num vs prefer class conflicts

  Dear users,

  Vi Analyzer asks me to close the refernce created by VI "read text file". So, I would close a refnum created by primitive VI "read text file". I used a direct wire, wiring by top and bottom of the casting, but each of them attend class conflicts (see the screenshot below). It is even possible to correctly transform the refnum (byte stream type reference) to refer (reference VI generic) and remove the refnum?

  

  See you soon,.

  You must use the close file.

• I can not read PDF files when I open my e-mail-windows explore internet. Something happened because I use to be able to read them.

  Windows Internet Explorer

  Can not read PDF files.  Something has changed.  Used to be able to read.  Can't understand why.

  Download a free pdf reader and try again

  Foxit

  http://soft2011.co.UK/PDF-reader.php

  Sumatra

  http://blog.Kowalczyk.info/software/sumatrapdf/free-PDF-reader.html

• Windows Contacts now display an Adobe icon for each of them and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.

  For some reason any, that my Windows Contacts show now an icon of Adobe for each of them, and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.  I tried right-clicking and using "open with...". "to set a default value, but no other programs are listed as possibilities.  By clicking on 'Browse' of course gives me a window of the Explorer, but I have no idea what program select open Windows Contacts with.

  Contacts Windows used to work perfectly, and I have no idea if this problem started, or why.

  Can someone tell me how to open them properly, with the Windows Contacts program?  Thank you!

  original title: my Windows Contacts have Adobe icons and does not (Hijacked by Adobe Reader 9.0?)

  Go to: Control Panel, programs by default, associate a type of file or Protocol with a program.

  Scroll down to:...

  .contact... Click here to highlight, click on change program, click Windows Contacts.

  Make sure that there is the box... Always use the selected program to open this type of file.

  Repeat the process for:...

  . Group

  . P7C

  .vcf

  (Protocols)

  LDAP

• Windows Media can not read the file. I moved my music on my new computer, now I can not play

  I have an emachine computer and I put my music on discs and put it in my new computer. the only problem is that this message keeps coming up. Windows Media can not read the file. the player might not support the file type or does not take in charge the codel that was used to compress the file. need help

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• can PE read psd files created in photoshop 7

  can PE read psd files created in photoshop 7

  julieh76912556 wrote:

  can PE read psd files created in photoshop 7

  If you want to say: ' can elements can open files created in the full Photoshop, the answer is Yes, with some restrictions.

  See this recent post:

  Hi, with photoshop can elements - I open and work with a psd file that was originally done in photoshop cc?

• I shoot in the NAVE with a Nikon D5300 but Lightroom 6.1 says that it can't read my files. How can I fix?

  I shoot in the NAVE with a Nikon D5300 but Lightroom 6.1 says that it can't read my files. How can I fix?

  I just tried again and this time I have not had any problems - very strange. But thanks for your quick response.

• I have a panasonic G3 camera and already use 3 years lightroom for raw files, now I bought a new G7 and he can't read raw files in lightroom, to me terrible, that I update lr to 5.7

  I have a panasonic G3 camera and already use 3 years lightroom for raw files, now I bought a new G7 and he can't read raw files in lightroom, to me terrible, that I update lr to 5.7

  Move the discussion to Photoshop Lightroom

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• SpeedGrade windows are all white - can not read text

  Hello

  After a new installation of Speedgrade creative cloud, the main window is covered in white, and I can't read text or navigate through the workspace.

  

  Any suggestions?

  Thank you

  Ed

  Please ensure that a good graphic driver (nvidia) is installed

• Problem reading text file

  CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

  All temperatures in ° F.

  If I use the scan function, say:

  public static char cdum [2048];

  ScanFile (DataFile, "%s > %s", cdum); I get these results:

  cdum [0] is - 2

  cdum [1] is 65 (which is the ASCII character 'A')

  The rest of the cdum is all zeros.

  In a hex editor in decimal display grouped by bytes, the line is:

  0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

  ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

  So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

  Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

  Data file attached.

  Thank you-

  Scott

  Hello

  I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

  This is consistent with your observation of 16-bit data.

  LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

  So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

• creating or reading text files based in compiled vi (.exe)

  I did my .vi which contains features for reading/writing of settings and write log files. All goes well until I want to create an executable to distribute to colleagues who don't have labview development. When you run the .exe, it seems that I can't create or read .txt or .ini files. No idea how I can import functions open file in read/write/text to my .exe?

  In fact, you try to create or read a file inside the executable.  Of course, this won't work.  Instead, use the Directory of the Application.  It returns the folder that contains your project (in the LabVIEW environment) file or the folder of the executable (when in the execution engine).

  So in your example, you just have to the Application Directory and the path to build to get the location of your settings.ini file.

• Reading text file and graphic

  Hello everyone. I'm new to Labview and have started using it only a week ago. My advisor gave me a difficult project and I'm stuck. My goal is to recover data from a Keithley instrument by setting voltage and current measurement. I could find a driver to do, but now he wants me to take my measurements and make a different chart that is already in the driver. The graphic I get is for X vs Y that has tension on the horizontal axis and the vertical current. After I receive this information, it is then saved in a .txt file. Which wants me to my Advisor, is to take the values that are recorded and divide (V / I) which is equal to the resistance and then to draw resistance depending on the tension. Since I am very new to Labview, I have trouble reading the text file, strength design values and the tracing result. To add to my troubles, the computers I use have only up to Labview 7.0 Express. If anyone can help me please, it will be greatly appreciated because I would rather graphic using Labview values instead of using Microsoft Excel. Thank you.

  Sorry, misunderstood how you want to display the data. The first table seems to be the tension and the table that is the output of the divide is the resistance. Instead of build table and a graphic waveform, you'll want to use the bundle where the upper entrance is your x axis and the background is the y axis and sire of the output of the present in a XY Chart.