Re: Satellite L850 - starting with "no boot device - please reboot"

Similar Questions

• Satellite L850D - 12 p - no boot device - please reboot

  I hope someone can help

  I have the laptop above and I turned it on to get this error

  + "No boot device - please reboot ' +.

  But was OK yesterday
  It doesn't let me in Bios at all. As soon as I turn it on I get this message instantly
  I tried a new hard drive in the laptop, but still the same error

  Hello

  > I tried a new hard drive in the laptop, but still the same error

  The laptop computer was preinstalled with the Win 8 System.
  The laptop BIOS UEFI s takes the mode and secure boot.
  This means that if the secure boot and UEFI is enabled, the laptop is unable to start the external device or wouldn't boot to other systems such as Windows 7 or Linux.

  To install another system, you must change the mode MSC UEFI boot mode and have disable secure boot option.

  To access the BIOS, you must press the F2 key immediately after the laptop has been powered.

• Satellite L50 - B - "no boot device - please reboot your system.

  This laptop does not start, it gives just the message "no boot device - please reboot your system.

  It looks like the partition table has disappeared.

  There is no support of recovery, no recovery partition, I can access it on the hard drive and no Windows key.

  How can I install windows on it?

  L50 - B PSKTNA-02R016 satellite

  Have tried to start while holding down the 0 key, but no luck.

  This computer is TWO DAYS OLD!

  According to specifications of the laptop, this machine was delivered with pre-installed Win8.1. Yes, there is no recovery media. For years, Toshiba and many other laptop manufacturers offer laptops without disk installation, but original recovery image is saved on the HARD drive, so if everything is OK you can start installation of recovery of the HARD disk image or create a recovery media that you can use for installing the OS.

  If you get your laptop work again thanks to create this media. How this is described in the document s user manuals.

  Recovery partition cannot disappear from the only one. to be honest, it's not clear to me what happens exactly with your laptop.

  Start your machine and press F12 to get into the boot menu. There you should find option enter the configuration. Using this option, you will be able to enter the BIOS settings. Please check if the HARD drive is listed and recognized correctly. by default the BIOS settings and restart your laptop. What happens when you do this?

• Satellite L50D-B - no boot device - please reboot

  Does anyone know what to do when you get only bios saying "no boot device - please reboot" during computer startup?

  Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.

• Cannot start by Satellite L850 - no boot device - please reboot

  Hi, can you help me?

  I have a toshiba Satellite, win 8, and when I try to start it it shows the message 'check' media (fail) and then shows "no boot device - please restart."

  How can I solve this problem?

  Unfortunately for these questions there is not some sort of magic bullet. Start your laptop and press F12 to get into the boot menu. If it works check if there is the option to enter setup. Choose this move down arrow and press ENTER.

  If it works, you will see the BIOS settings. On the first page (HAND), check if the HARD drive is listed and recognized correctly.
  In any case, use F9 and BIOS to the default settings. After doing this use F10 to save and exit.
  Check again please. If the same thing happen over and over again I fear you have professional m need help with this.

  What model of laptop do you have exactly?

• My laptop isn't just saying no boot device - please reboot the system.

  Please please please help me I can't do anything with my laptop, I pressed the power button, but the same message appears every time and I don't know what to do I tried pressing a button or two on the keyboard, but the message came under a just and repeated that the system I have is an INDIVIDUAL C855D TOSHIBA - 13N and it has windows 8. I desperately need to get up and running works correctly in as soon as possible I am in major panic like don't know what to do.

  I also want to thank you for the advice given earlier I take note of it that were unable to try anything, but I appreciate the input considerably.

  Hi LindseyMarsh,

  Thanks for posting the request in the Microsoft community!
  I understand that the computer Toshiba laptop says "no boot system reboot device please. Try the suggestions and check if it helps to resolve the issue.

  Method 1:
  You can try to repair the computer:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  Method 2:

  If the computer does not boot the system from windows DVD then it could be a setting in the BIOS that is not compatible to windows startup 8 DVD or it's hardware

  You can make sure that the boot order is correct in the BIOS (Basic Input Output System), and the video card settings.

  For all related parameters of the BIOS, I suggest you to contact the manufacturer for support.

  BIOS settings are different for the different computer based on the motherboard manufacturer and the key to enter the BIOS can vary.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Just reply with the results. I'd be happy to help you further.

• Satellite showing C55-5-137: no boot device please don't restart

  Hello
  Just bought a computer portable satellite c55-5-137 and when I start the computer shows this message: no boot device - please reboot the system.
  Tried to boot from usb win7, same message. Also in bios I don't have the option to disable secure boot, the only option is uefi (grayed out). Need help .

  I assume that the HARD drive is not visible somehow for your system.
  When you enter the BIOS disk HARD is listed and detected correctly?
  Try to set the BIOS to default settings and check again.

• Message ' No bootable device - please reboot '-Satellite C series

  Hello

  Didn't that my laptop for a little more than a month and the white on the arrow of the screen completely freezes just after the start. So could not use any program or do anything on the computer.

  Backed up all my data then got a friend IT to watch.
  Completely erase the computer to start and am now only able to get a black screen that says:-

  "Control of the media.

  then, after two seconds

  "No boot device - please reboot".

  Restarted about 10 times now and the same error message.
  When I press a key, the message is repeated.

  Thank you

  Hello

  First, check which device was chosen to start the laptop.
  Generally, the laptop should boot from the HARD drive.
  Then, go to BIOS (F2) and check if the HARD disk has been set as first boot device.
  In addition, you should check if the HARD drive is recognized in the first page of BIOS (size, name).
  In the case where the HARD isn t listed, the HARD disk drive is defective and cannot be found by the BIOS.

  This would require drive replacement HARD and the new installation of the OS.

• Satellite L50-B-1E2 - no boot device

  Hello!

  When I turn on my laptop I get the message "" No bootable device - please reboot '. " Any ideas on how to solve this problem?

  Thank you

  The message indicates that your laptop can not find boot device.
  This means that it cannot boot the system from the HARD disk.

  Question: Your HARD drive is recognized in the BIOS?
  Switch on and press F2 to enter the BIOS.
  On the first page of the BIOS, you should see the details of the disk (size, name)
  Who do you see?

  Also I recommend you to check the startup control device.
  HARD drive is set as the first boot device?

  Last but not least check options: secure boot and UEFI mode
  These two options should be activated in case you use Win 8.1
  In order to use the other system or to boot from other devices, you will need to disable secure boot

• HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

  ProdID:V0Q01UA #ABA

  Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

  He was sent to HP they will solve this problem, my warrienty coverd.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• Satellite L50D - no boot device please don't restart

  Hello

  I'm trying to fix my parents laptop: it's a Satellite L50D-B - 14 p. It shows the error "No. Bootable Device please restart System" at startup. So far, I tried disabling "secure boot" and by replacing the boot mode 'boot CSM', without success.

  I can see in the settings of the BIOS that the HARD drive is still recognized, is not dead. I don't have the installation diskettes.

  Any advice on what to try next would be greatly appreciated.

  Thank you.

  Any ideas on how I can proceed?

  Is the fact that the HARD drive can still be seen in the BIOS, means that it is not dead? At the MS DOS command prompt, I typed in C: and it found nothing - it gives me to think that the hard drive may indeed be dead?

  I also ran a program of removal of data from a bootable CD. He managed to acknowledge that the HARD drive has existed and acknowledged that he had 932 GB. However, it said 0 bytes were free (which is odd).

  Any ideas would be appreciated.

  Thank you.