Can I saw my drawings in real time so that edit them in Photoshop?

Similar Questions

• On a Linux operating system, what tools need to developed a real-time application that communicates with FPGA?

  On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?

  It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.

  Is this possible at all?

  Thank you

  Michel

  Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.

  1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:

  Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014

  2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian).  The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:

  Linaro Toolchain for Cortex-A

  3. I installed the linux drivers from NOR-RIO 15:

  Driver OR RIO 15.0 for Linux

  4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:

  Example of API Interface FPGA C OR real time Linux and Eclipse

  Michel

• How can I draw the intensity in real time of a picture in time real (imaq 1394)?

  I have a firewire camera.

  I hooked up my camera to my pc with labview and now I display image in real time. How can I draw the intensity of a region dependent on time?
  Y - intensity
  X - time... I would watch the variaions real-time intensity...

  Thanks in advance

  The light meter example is pretty much what you want to do. It is located here:

  \National Instruments\\examples\Vision\2. Functions\Light Meter\Light meter Example.llb\Light meter Example.vi

  In the example, the x axis are the number of iteration, but it is easy to modify to use a graphic instead of a graph and chart the time instead.

  Hope that helps.

  Christophe

• Oracle database can interact with sysbase database in real time?

  There are two database, it is oracle, one is sysbase, sysbase is the database of products. My program only can consult the oracle database and cannot visit sysbase database directly. My question is whether there is a direct connection to oracle, sysbase herbal database, when I visit oracle, oracle database can interact with sysbase database through this link in real time? How to make above function? Please give plan for her.
  
  Thanks in advance!
  Best regards
  Edward

  Yes it is. You must create a heterogeneous connection between these two databases
  Take a look at the links below:

  http://www.DBA-Oracle.com/t_heterogeneous_database_connections_sql_server.htm
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:13401716754850
  http://download-West.Oracle.com/docs/CD/B10501_01/server.920/a96571/repmultdemo.htm

• I inadvertently erased the entire photo with webroot... program a stupid mistake, but a mistake nonetheless.  How to reconnect my backup photos.  I can import them, but I am unable to edit them with photoshop.

  How to reconnect my backup to Photoshop photos.  I inadvertently delete the program whole photo with webroot... permanently.  Help

  I'm having a problem of understanding that you wrote it's describing.

  You wiped out the entire photo with webroot... program what it means.  This means that you wiped out of Photoshop? What is webroot?

  How to reconnect my backup photos?  For this that and why are you concerned about your backup Photos if you program you Photo wiped out, you also destroy your Photos?

  You can then import but cannot change the theme in Photoshop.  What you can import you them with and where do you have to import them and why you can not change what you've imported with Photoshop.

  Provide relevant information to get faster answers

  More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:

  • Product number and the version of Adobe
  • Operating system and version number
  • The full text of all error messages
  • What you were doing when the problem occurred
  • Screenshots of the problem
  • Computer hardware, such as CPU; GPU; amount of RAM; etc.

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• How can I get a graphic display in real time of a task daqmx

  Hello

  I have set up a task DAQmx using the DAQ assistant and the task is to work and produce a graph/data, but not before the task is complete. How can I get a display in real-time of the numberical values or graphics?

  Any help would be really appreciated

  Thanks, Paul

  paultryan wrote:

  I could get set the frequency of sampling and to give a regular change of output, but im looking to get this long-term data acquisition. For example, the graph changes everything but 1 - 5 get 30 minutes of data.

  I used the DAQ assistant and labview is completely new to me, if im not sure where it take it from here.

  concerning

  Then you should use a chart - not a graphic. A graph has a story. You must set this. Right click and select "Chart History Length".

• How can I get a display of a Gaussian filter in real time by painting with the brush?

  I'm trying to find information on how to get a live view of the Gaussian blur by painting with the brush.

  Google is not useful, nor own Adobe forum searches produce something useful.

  I've seen talk about Smart filters and naming the layer as a smart object in order to activate a dynamic filter, but I can't get the display in real-time of the filter when you paint so I'm not sure if this process is helpful at all for me or not because I can't locate information specific to what I'm trying to do.

  I use by way CS5, so if this option does not exist, it would be useful to know so that I'm not spinning my wheels.

  Thank you

  You seem to talk about to see in the future.  You want to see the effect of a unused Gaussian blur filter while wearing the brushstrokes on that later, you intend to use the Gaussian blur.  How would this work?

  I use constantly a similar workflow for shading in my illustration work.  If the blur spreads too wide effect, I use Free Transform to resize. If it becomes too transparent, duplicate the layer to increase the opacity.  If too thick, I reduce the opacity of the layer.  I wouldn't bother using intelligent layers of the to because it would have no benefit.  Is it that help at all?

• NOR-DAQmx compatibility with the system in real time

  I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

  I am using LabVIEW 2015 in my current computer.

  Thanks in advance.

  Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

• Error-307650 during a sequence in real-time with API LV

  I created a basic real-time sequence that checks the time it takes a signal reach a certain threshold.

  

  On the side of the LV, I use the API to call this sequence. I make sure that all channels and settings are defined as in the examples. However I get 307650 error that says "NEITHER VeriStand: Index was out of range." Must be non-negative and less than the size of the collection.

  ' Parameter name: index.

  Any suggestion to help here? THX. Code is attached.

  There are two problems here:

  1. The Stimulus profile editor is not indicating that there is an error with this sequence, although there is a. Note that the variable InitialTime is used in an expression, but is not declared as a parameter or a local variable.

  2. you get an error at runtime because of it, but it's not terribly useful (index out of range).

  You can fix this by adding a local variable of InitialTime to your sequence. I dropped the CAR 338386 about this bug.

  Once you do this, there is something extra, you will need to set in your VI which runs the sequence so he could get the results of the sequence properly. You use correctly the value of the sequence name to read the back of the sequence Variable. You use the Session name used during the deployment of the sequence. Which does not match the name sequence.

  To get the name of the sequence, use VI to get all the names sequence on your session profile of stimulus to get the array of names for all of the top level of the session sequences, then index on the first point, given that you only use a single sequence. Example below:

  

• OEDQ-UCM: Match individual real time does not

  Hello

  We have created personalized for the individual and entity matching rules and added custom fields (which are used to match) in the fields of the seller for account and Contact deduplication parameter. We tested the rule through web services in real time and that they work as expected.

  To account when we create a record in duplicate in the user interface, based on the new rule to match the popup comes with the score. But for the Contact it does not work. We have one rule for Contact match in which if is a field (say A field) is a match. But through the user interface, we can create duplicate with the same values in the to field.

  In the sdq Connector log, I can see pilot records and records of candidates are passed to OEDQ.

  March 17, 2015 23:13:59 [11796526]: sdq_init_session

  March 17, 2015 23:13:59 [11796526]: return of sdq_init_session from 432685954

  March 17, 2015 23:13:59 [11796526]: sdq_set_parameter 432685954 < data > < parameter > < name > RECORD_TYPE < / name > < value > contactmatch < / value > < / parameter > < parameter > < name > clusterlevel < / name > < value_2 > < / value > < / parameter > < parameter > < name > matchthreshold < / name > < value > 70 < / value > < / parameter > < / data >

  March 17, 2015 23:14 [11796526]: sdq_get_dedup_keys 432685954 < data > < DriverRecord > < mobilephone > < / portable > < faxphone > < / faxphone > < dob > 05/03/1979 < / dob > < email > [email protected] < / email > < uid1 > EMIRMUR < / uid1 > < FGBFullName > Murali Katikk < / FGBFullName > < uid2 > PSPRTMUT < / uid2 > < FGBPassportExpDate > 03/06/2017-00:00:00 < / FGBPassportExpDate > < firstname > MURALI < / firstname > < individualid > 1 - DAY2 < / individualid > < lastname > KARTIKK < / lastname > < middlename > < / middlename > < jobtitle > < / jobtitle > < alternatephone > < / alternatephone > < City > < /. City > < Address1 > < / address1 > < / DriverRecord > < / data >

  March 17, 2015 23:14:01 [11796526]: sdq_dedup_realtime 432685954 < data > < parameter > < name > RECORD_TYPE < / name > < value > contactmatch < / value > < / parameter > < parameter > < name > clusterlevel < / name > < value_2 > < / value > < / parameter > < parameter > < name > matchthreshold < / name > < value > 70 < / value > < / parameter > < / data > < data

  > < DriverRecord

  > < mobile phone

  > < / mobile phone

  > < faxphone

  > < / faxphone

  > < dob

  > 05/03/1979 < / dob

  > < Email

  > [email protected] < / email

  > < uid1

  > EMIRMUR < / uid1

  > < FGBFullName

  > Murali Katikk < / FGBFullName

  > < uid2

  > PSPRTMUT < / uid2

  > < FGBPassportExpDate

  > 03/06/2017-00:00:00 < / FGBPassportExpDate

  > < first name

  > MURALI < / name

  > < individualid

  > 1 - DAY2 < / individualid

  > < name

  > KARTIKK < / lastname

  > < middlename

  > < / middlename

  > < jobtitle

  > < / jobtitle

  > < alternatephone

  > < / alternatephone

  > < City

  > < / City

  > < address1

  > < / address1

  > < / DriverRecord

  > < CandidateRecord

  > < Email

  > [email protected] < / email

  > < first name

  > MURALI < / name

  > < individualid

  > 1 - DAWX < / individualid

  > < name

  > KARTIK < / lastname

  > < / CandidateRecord

  > < CandidateRecord

  > < Email

  > [email protected] < / email

  > < first name

  > MURALI < / name

  > < individualid

  > 1 - DAXD < / individualid

  > < name

  > KITENGE < / lastname

  > < / CandidateRecord

  > < / data

  >

  Can I see any newspaper OEDQ to check what is causing the problem? where could I find it? If I run AAU Batch Manager job too, records become Source_inserted, with no results in S_DEDUP_RESULT. It works when I test the web service. I am new to AAU and OEDQ. Ask for to provide you assistance on this.

  Thank you

  ALIOU

  Hi Liam,

  Check objects integration ["Contact Dedup IO" and "Account Dedup IO"] and the [deduplication] Business Services using Siebel tools.

  Then in Siebel, update data cards to bind the fields in the UCM IO to DQ IO.

  Kind regards

  Nick

• Real-time validation while creating a node

  Hi all

  I have the following problem when it comes to check if the required fields have been filled.

  I created a real-time validation that checks if a field is empty or not. It works pretty well for nodes that are already being implemented.

  But when I want to create a new node DRM gives me an error until I can create the node: "Please fill property X".

  Is it possible (except batch validation) to solve this problem?

  Thank you very much!

  Kind regards

  Pascal

  This is the common problem with validations in real time on the required fields, like the GET validation as and when the node is created,

  Try to evaluate the node creation date, if is that a new deal validation allows to fill the properties in the other case, look for the values of fields are mandatory.

• AE 13.7 which is not yet present in preview in real time.

  Hi all

  I have the latest after effects CC2015 (13.7), but I still can't previews my comps in real time? It's to play in real time only when I jump 01 framework on the preview!

  I have the 5K. iMac with retina display core i7 with 16G of ram and GPU ATI. with OSX El Capitan.

  I just want to see the simple RAM Preview. As before the 0 button on the keypad. is this possible?

  Best,

  Ali.

  This is a bug with the works of the new architecture (introduced in 13.5) with El Capitan (if the bug is Apple's fault or Adobe is irrelevant - it is a very annoying bug if you do not know workaround). We have a number of discussions here about it. And he has been mentioned in the blog of Adobe After Effects in a few messages.

  As I alluded to earlier, there is a very simple solution.

  Anchor another Panel under your control panel mounting. Like this:

  

  Note how the render queue is anchored in the timeline panel.

  That's all.

  This will allow you to get cached previews who read in real time with the space bar so of numpad 0 found. If you prefer to keep your queue of rendering also, choose another Panel, you worry less.

  Alternatively, you can apply the update fixed a bug of beta-testing the 13.7.1 intended to fix this bug: help test the update of the fix after effects CC 2015 (13.7.1)

• RAM Preview plays is not in real time on the new Macbook Pro

  Hello world

  I have problems getting after effects to play the video in real time in AE CS6. I use a brand-new Macbook 2015 Pro 13 "retina with a dual core 3.1 GHz processor Intel Core i7 and 16 GB of RAM. I just made sure my copy of AE CS6 is up-to-date with the latest updates (11.0.4.2), and yet I am unable to read the video or animation in real time using the RAM Preview to any size greater than 25% in the Viewer.  If I try to play a video clip of 29,976 fps, the framerate tops out at about 17-18 frames per second. When I press 0 for the RAM Preview, it starts caching the images such as normal, but even after a loop continuous cadence comes not near real-time. The audio plays fine, but the video starts immediately behind. I can't even a scene of simple great test of a form of retouching layer move on the playback screen in the real time RAM Preview.

  That said, I can get it to play in real time if I reduce the viewer up to 25%. But obviously, I won't be limited to work in quarter resolution on a new laptop. My last Macbook pro from 2008 and completely across the well treated RAM previews, being able to cache images and play them back in real time without problem.  I have to assume that there may be a function that I'm missing or something goes wrong, unless I just grossly overestimated the capabilities of my new laptop.  But surely, it should be able to manage simple video playback. I had no problem using first on this computer, then it can of course deal with the video.  Any help you can offer would be much appreciated, because this problem becomes really frustrating!

  Just for fun, try the trial of CC 2015 and see if it behaves correctly.

• ORACLE 11G 'real-time applies' does not work?

  We have an original database on ORACLE 10.2.0.4 and update us for 11.1.0.7.
  After that, we create backup of database and tried to use the "real time applies.
  
  Principal database can transfer standby database log files and ensures database can also apply to newspapers. The problem is that we can NOT work on 'apply in real time '.
  
  Ideal ant that bad?
  
  = procedures = (standby database)
  
  SQL > bootable media.
  ORACLE instance started.
  
  Total System Global Area 2087780352 bytes
  Bytes of size 2161272 fixed
  1795163528 variable size bytes
  251658240 of database buffers bytes
  Redo buffers 38797312 bytes
  Mounted database.
  
  SQL > alter database open read-only.
  
  Database altered.
  
  SQL > alter recover managed standby database disconnect log file using current;
  
  Database altered.
  
  SQL > select PROTECTION_MODE, PROTECTION_LEVEL, DATABASE_ROLE, SWITCHOVER_STATUS, OPEN_MODE, GUARD_STATUS from v$ database;
  
  PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE SWITCHOVER_STATUS
  -------------------- -------------------- ---------------- --------------------
  OPEN_MODE GUARD_S
  ---------- -------
  MAXIMUM PERFORMANCE STANDBY UNAUTHORIZED PHYSICAL PERFORMANCE
  NO CLIMB
  
  SQL > select process, status from v$ managed_standby;
  
  STATE OF THE PROCESS
  --------- ------------
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  INACTIVE RFS
  MRP0 APPLYING_LOG
  
  6 selected lines.
  
  
  = Configuration of primary database init.ora file =.
  
  # for DG Employment
  db_unique_name = DBPMY
  log_archive_config = 'dg_config = (DBPMY, DBSBY)'
  Log_archive_dest_1 = ' LOCATION = / Archive/DBPMY/arc/Vault MANDATORY.
  LOG_ARCHIVE_DEST_2 = "service = DBSBY valid_for =(online_logfiles,primary_role) db_unique_name = DBSBY LGWR ASYNC = 20480 REOPEN option = 15 NET_TIMEOUT = 30'
  *.log_archive_format='DBPMY_%r_%t_%s.arc'
  log_archive_dest_state_1 = enable
  LOG_ARCHIVE_DEST_STATE_2 = enable

  Is your compatible parameter to at least 11.1?

  Best regards
  Robert
  http://robertvsoracle.blogspot.com