Drive HARD recovery failed, Qosimo does not start with BOOTMGR is missing

Similar Questions

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Satellite A200 PSAF3A does not start with 4 GB

  Hello

  I have a model A200 PSAF3A-0QH01N.
  I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
  Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

  Any advice?

  According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

  Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

  Where have you bought?

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• Unfinished system recovery - the computer does not start

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  Hey Pete Skett

  problem with the packard bell recovery media, or how it was made by yourself you will need to contact them for support

  It's their recovery process and the media

  http://IL.PackardBell.com/PB/en/IL/content/support

  I suggest that you ask them to send you a set of vista recovery disks that they should have for a nominal dollar cost and also ask them if you have a recovery partition on your hard disk to perform a recovery to factory standards

  If you have a recovery partition, it will save you money

  You can press F11 on startup to see if you can enter the recovery partition recovery process, if you still

  Ask packard bell for the correct key sequence

  Walter, the time zone traveller

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Satellite C650 does not start with android phone on

  Hello

  I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

  Thank you very much
  Ian

  Cool. Thanks for the comments.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• 7 does not start with a connected external Western Digital hardrives.

  I have two external hardrives WD, connected to a pc to the bridge under windows7.  When the hard drives are connected, Windows7 does not start.  It hangs on the black screen.  Without the disks attached, it starts very well.  Anyone know what I can do to not having to pick up leads outside whenever I want to start?

  Solved.

  Use Windows Update to install the update from Western Digital Technologies WD SES device released by Microsoft in January 2011.

  My system hangs is no longer with USB Legacy Support set to 'Auto '.

• Windows 2008 R2 on HP ML115 restored to VM does not start with BSOD Stop 0x0000007B

  As a contingency plan for our server HP ML115 running Windows Server 2008 R2 Foundation, we want to restore the backup created with windows (optional bare metal) backup to a virtual machine under VMware player 3.1.2. Restored boot fails with BSOD Stop 0x0000007B. Initially, the machine works with the integrated Nvidia RAID controller. We tried with the converter to migrate the image to the new disk controller, but the virtual machine does not start. Any attempts to install the driver LSI SAS 3000 in the physical machine failed because the seller and models do not appear in the console devmgmt even if we are using the corresponding diskette/driver.

  Any tips are appreciated. Thank you.

  You may need to start the virtual machine with an Image of CD/DVD/ISO OS appropriate Live with the ability to edit the Windows registry on the client, and clear the nonexistent controller while allowing the new virtual controller and add the driver if necessary and check the .vmx config file is to show the controller suitable as well.  I did not go with your particular scenario however have done with similar cases so it's doable.

• C870-19(r) satellite does not start with the new SSD

  Hello

  I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.

  He said: not found system.

  Post edited by: joch333n

  None found system means that there is no system installed on the SSD drive...

  What you trying to do?
  You start from a disk in order to install the new system?

  In this case, you should disable startup secure in the BIOS.
  I also recommend moving from UEFI mode MSC!