I'm quite familiar with the Web publishing tool in the Options menu. I would not have to start the web server everytime I open LV I only VI running on a computer. Web publishing tool properly generates the html page. This VI is just the race throughout the day and requires no user input. I would like to only it if, in the case of a reboot of the machine, some users might just run the VI and don't have to worry also from the Web server. Is there a way to do this?
Hi tir38,
You can use the nodes property programmatically, start and stop the web server in LabVIEW. See the knowledge base article for more details.
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
The code will sit in the while loop until I press stop.
Web server: Active Server = FALSE
Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">
"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b. KeepAlive on KeepAliveTimeout 60 Timeout 60
As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
Copy a new default configuration file before the entry into force
Writing a predefined file (encoded) before initializing config
Definition to root before initializing directory (it actually generates an error because the server is not active...)
Set WebServer.Active = TRUE several times inside the while loop
Toggle the web server in the ini file
System:
LabVIEW 2010
PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
I can't start my webcam when the cat to live messenger
Hello
Try to install the drivers fom the camera manufacturer's Web site. If you do not disconnect, wait about 10 seconds, then reconnect the device. If those who do not work, restart your computer (or restart the computer). Also make sure that Live Messenger is set to the correct camera.
Captivate 8 - video integration problems. Video won't play Web server when published under the title of course HTML5 and video is selected to play in the same screen. Play video it works only in a new window. The problem is the customer's requested integrated video and it shows as an option in Captivate 8. In addition, the video screen is not at the same place on the screen, the image moves to the top of the browser window in Internet Explorer. Graphics problems appear ONLY in IE and Chrome for PC. We have updated browsers, installed all updates to Captivate 8 etc.
The issue seems to be with internet explore. The url is *.mp4, if IE browser opens Media player in a new window to read the files.
Workaround solution:
Instead of using the interaction of the Web object, you can use a Web object (objects-> Web) site in the menu object.
After insertion, select the code incorporated in the style of the real property section. (Screenshot below)
Encapsulate the url in an HTML video tag and use it as input.
I installed NetworkAcc on my BlackBerry Storm 9530 with OS c. 5 and now I can't use my web browser. I get the error message: "Cannot see the web page when the radio is off, please turn radio". on and try again. »
I don't have any idea how to enable or disable the radio. What is the problem and How should I do?
I'm not familiar with "NetworkAcc" but to turn on your wireless radio, you need to go to 'Manage connections' and check the Mobile network (and also wifi or bluetooth if you want to use wifi or bluetooth.)
How can I create an exception to allow users to access a web server on port 80 in the demilitarized zone inside? They cannot do that now because, in my view, the server goes through a NAT the public address, so how can I set up where a request from inside on port 80 on this server will not translate the IP of the server to a public IP address (via NAT)?
I have an application that I'm migrates from the web to mobile, and I recently encountered a problem where it will crash on the charge, but _ONLY_ when they are packed for liberation as well as iOS.
FOR EXAMPLE:
1. for Android, works at
-Emulator
-USB debugging
-release mode compilation
2. for iOS, works in:
-Emulator
-fast compilation USB debugging
-USB debugging standard compilation
Doesn't work in:
-compile ad hoc
Initially, I thought it was because of loading SWF with ActionScript, but even after replacing these files with static JPEG, it always crashes.
I commented all the traces, after another report by the forum that has listed the tracks as a problem with ad-hoc compile.
I tried mobile bundle strings resources out of the sight of problem that these channels are not displayed in the view of problem (but do it somewhere else).
In all cases, the result is the same:
Discover loads then freezes before he gets far enough set navigatorContent property (declared in MXML) so it hangs just with no. visible labels.
Have you tried a number of things to debug it and twenty minutes by compilation, there is a limit to how much I _can_ try, so, please, please, someone has an idea of where to look the potential problems that could be causing my application to fail?
Thank you
Gaius
I have it.
I used the Swiz (which is awesome, btw) framework and compilation of the library of Swiz rather that to use the CFC that I needed a change to the base, I forgot one of the metadata tags since the compiler args - for some reason, recovered by operating in any other mode of compilation, it crashed when running in release mode.
I was encouraged to post this here (update on the Photoshop forum post)
"I've seen several similar topics having problems with Bridge () for CS6 beta), nothing new with performance problems with Photoshop CS6
I installed most of the programs downloaded from the cloud. More running. So far, of my user account, I found again, Bridge and Indesign meet a 'problem' at the opening and close with no other message or details. Dreamwever, Flash, Illustrator and first run as far as I tested it. Everything seems to start very well from an admin account.
My user account Photoshoip CS6 shows a message about a locked file and cannot work. I can start CS6 PS using run as Admin and seems to power. I tried to change some permissions on discs and on my user account has yet CS6 PS do not start. (I need to check again) I read similar posts on earlier versions. I tried to purge the preferences, both manually and by using the crtl + shift, alt departure. I just still can't get CS6 PS to run from my user account.
Prograams CS5 of Design Premium start/run fine as far as I KNOW
I do not install beta CS6
FWIW
MB Gigabyte, w / i72600k
Windows7 64 bit
SSD for C:
standard drive for user accounts (moved / User for this disc)
standard drives for scratch and the starage file (each its own drive)
I tried to uninstall/reinstall without change the game.
I'm out of ideas.
Kevin
I'm sorry that I don't update this before today.
I solved the problems mentioned above.
I gave in.
I bought an ssd larger, moved my / User to the C: drive and created a new user account (such as the former was munged with attepts to fix the problem as soon as possible). Great pain, took a few hours a year later I found things I would put in place which had to be changed.
After the new installation of the WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit UCM_server1 EE cannot start. (Please see trace below). WCC 11.1.1.7 work fine in this environment.
Steps to follow:
1. installation of jrockit - jdk1.6.0_45 - R28.2.7 - 4.1.0
2. installation of WLS 10.3.6
3. installation of the WCC 11.1.1.8
4 creating the UCR 11.1.1.8 schema
5. creation of field of config.cmd with AdminServer, UCM_server1, IBR_server1
6. run Admin - (success)
7 run (optional) NodeManager - (success)
8 run UCM_server1 - failed
Still not work after having patched MLR 1 for WCC 11.1.1.8 or upgrade 11.1.1.7.
Log files we can see this problem caused by the JniNativeOsUtils.dll file in ' < Middleware Home > \Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1.
I have replaced JniNativeOsUtils.dll with the same 11.1.1.7 file version and UCM_server1 started working
I got errors when starting (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can raise in trace below), but COE upward and the works.
I also get error when you try to start the utility SystemProperties or ComponentWithard:
Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe." Load Assembly Microsoft.VC80.MFC, processorArchitecture = "amd64", publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.
I can access websites through bookmarks, most visited, history or if I click on links in Google, etc. If I click on a link directly, it will open. If I copy & paste or type a link into the address window, click Enter or on the arrow "go to" in the address window - no response. I tried several Web sites. This seems to have happened since the 29th of Firefox upgrade. This only happens with Firefox.
You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:
Windows/Mac: choose Help > restart with disabled modules
Linux: run firefox-safe-mode in the Terminal/Konsole
If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.
This might or might not be relevant to your question, but it seems that user.js is currently active in Firefox. The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
You can delete a possible user.js file and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox. You can get the profile below:
Help > troubleshooting information > profile directory > see folder
or
Go to Subject: support , and then click view the folder next to the profile directory.
Win XP Professional operating. TO 38.3.0 with lightning 4.0.3.1
Since the update of the program, it became initiate very slow and when finally the opening is generally slow, all around. Perform simple tasks like move a file, the program seems to wonder off into outer space. If you try to do anything but the program reports a message "do not reply" up to what he ended up doing ing to the first task. More often or not, he then proposed the following message is displayed. "" Script: chrome: / / Script: chrome://messenger/content/mailWindow.js:17messenger/content/mailWindow.js:17 ".
Hello I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system I put things in the host operating system, follow router setting page (shared ip settings page) 1 DHCP using OFF 2 DMZ host server using on 192.168.10.201 3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81 TCP/IP 1 use the following IP 192.168.10.201 2 gateway 192.168.10.1 3. the DNS settings of 4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8 for now, when someone tries to access my WAN IP then page host server is apear (from external network) If I stop server Web host then cannot access my WAN IP
and in VMware, I put the (Windows XP Pro) TCP/IP configuration 1 use the following IP 192.168.88.201 2. default gateway 192.168.88.2 3. the DNS settings of 4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8 5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81 and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of How can I make the Web server of the guest to access other networks operating system? in the guest operating system, I can access Web server of the customer by access 192.168.10.201 but I can't access Web server of the client by typing host operating system access the 192.168.10.201 any ideas? My version of vmware's vmware-workstation - 6.5.2 for windows
Hi Teayun,
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you
My "C" drive is it is full and I don't know what programs and files should be able to uninstall unused programs. Those that I was able to uninstall I was doing ground but that's left, I don't know what are the components.This has affected security do
I try to get my L20 to use all cards PCMCIA with Vista, but I get the dreaded 12 code problem.Y at - it a patch for this problem? I know some Toshiba must have a Vista BIOS works correctly, but there doesn't seem to be one for the L20. P.S. cards wil
Hello We have an HP 5500dtn. We were interested in upgrading the ram and adding a hard drive for better performance. However, the manual has no guidelines on how to complete it. Does anyone have directions on how to upgrade memory RAM and add a hard
I have problems to install a registry cleaner, so I'm removing any and all programs, toolbars, etc. that I did not thing that I need. I came across this list in my programs: Microsoft Automated Troubleshooting Services Shim, installed 11/23/10, if I
