5500dtn printer Hardware Upgrade

Similar Questions

• I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

  I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

  I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

  Update to the Sierra officially released

• Satellite Pro C660-2I - hardware upgrade

  Hey there, I was wondering if it is possible to update the graphics card, sound card and processor on this laptop? Please tell me you need to know

  Mobile units are no built like desktop computers and these updates is not possible. Hardware upgrade on laptops is very limited and can be done with the RAM and HARD drive.

  If you need machine with more performance is upgraded RAM up and implement faster SSD HARD drive or you need to buy the new laptop.

• HP Pavilion dv 6000: hardware upgrade for hp pavilion dv 6000

  I have an old hp pavilion dv 6000, I recently upgraded to windows 7 and everything works well, but I would like to make the hardware upgrades as well.

  I want to move to maximum capacity, specifically: processor, graphics card, hard drive, and wireless network card.

  If someone can provide me with a list of known compatible with my system hardware would be great, I'll also be open to any suggestion of additional hardware upgrade if someone propose

  Hello

  Two things, you will not be able to upgrade: display the card and wireless network card.

  (a) graphics card: we cannot spend more than 90% of laptops, including yours,

  (b) wireless network adapter: your machine was built before the mid-2014, the whitelist prevents you to upgrade the wireless card.

  Now, you have 2 items to upgrade (maybe 3): hard drive and the processor (CPU) (and maybe RAM)

  (a) HARD drive: any 2.5 "HDD or even SSDS with 9.5 mm or less. SSD is more expensive but faster. HHD, please select the one that has RPM faster (7200 RPM), large cache (more is better). They are numerous on the following list including SSD:

  http://www.centrecom.com.au/notebook-hard-drives

  (b) for the processor, please use following 5-69 of the manual page to buy the right part of HP. Please do not ask me why to buy at HP.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

• Tecra S3: hardware upgrade - CPU, RAM, HARD drive

  Hello

  I just got a laptop from my company and it's 2 a bit slow for what I do, so please advise me on a hardware upgrade or point me in the right direction to ask this question.

  My Tecra is S3 model PTS30E - 01P01CG3 Y5120397H series, it is about three years old and I would like to upgrade:

  1 - CPU Intel Pentium M1.86 gHz, I can replace it with a dual core or core 2 duo of?
  The motherboard does it take? What is the most powerful CPU it can use?

  2-ram memory is 1 GB and I want to place as much as possible. 2 GB is the best that I can place?
  Can you recommend a brand of RAM which would give exceptional results?

  3-disk HARD 80 GB comes, and I also want to know if I can replace it with a bigger?
  Than do options GB 120 GB, 160 GB, I have more? These HDD fit as the size in my laptop?

  4-If you have any other recommendation of dope performance, please let me know.

  I live in Romania, I'm not sure where can I make these upgrades. What is the nearest place?

  Thank you and have a nice day.
  Florin.

  Hello Florin

  Tecra S3 is old enough laptop model, and expect too much with upgrades, especially with the CPU. Of way General CPU cannot be upgraded and perhaps should not be upgraded. Each laptop model has a specific design and cooling modules are optimized for the specific hardware platform.

  1. so, for you it is important to have the laptop stable without damaging the hardware. Okay, just for the record
  Tecra S3 comes with separate Intel Mobile Pentium-M processors - [1.73GHz/1.86GHz/2.0AGHz (0.748-1.356V)/2.13GHz (0, 748 - 1.372V))]
  [/ 2.26 GHz (0, 748 - 1.404V)] and these processors operate at 533 MHz bus clock.
  Update CPU not is also not supported if forget it. The CPU you have inside is powerful enough. What you need is more RAM and perfectly configured and optimized operating system.

  2 RAM can be upgraded up to 2 GB and it is not the problem. You can use 2 x 1 GB RAM DDR2-400/533 1 GB (PA3411U-1M1G).
  This RAM is tested and works perfectly with your Tecra S3 of will be.

  3 disk HARD upgrade is also not problematic. Tecra S3 uses SATA HDD and you can improve it with more than 120 GB. I'm 100% sure that you can use 160 GB with no problems.
  In my opinion, that's good enough. Isn t it? ;)

  4. optimize the operating system. Disable all unnecessary background processes and your Tecra will be working perfectly.

  >.. .i don't know where I can make these upgrades.
  Do it alone. It is not so complicated. If you need help let us know.
  Good bye

• The hardware upgrade on HP computers

  Here is a video that illustrates the hardware upgrade on HP computers

  I hope this helps.

  Good luck!

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• Hardware upgrade of 4 servers windows 2003 7

  I just upgraded my Commvault software to version 9, with de-DUP.

  I noticed that my CF band is only changing to 100bm Brook.

  I read on the hardware upgrade to version 7.

  I have 14 VM to upgrade all the 2003 win. All have the latest tool installed 4.1

  Is there a there has been has I should look for before I start to put it off?

  before upgrade you the virtual hardware, you must upgrade the comment of VMware tools.  In an engine, the customer is off State, you can upgrade the virtual hardware.  From there on, turn on the prompt, login, let windows find all new device drivers and then restart again.  Here you connect and remove all devices shaded in Device Manager... Usually, restart us once more after that.

  With regard to the witch hunt.  If you are concerned, you can always snapshot the prior comments to the upgrade and if there are problems, return back.

  See the KB article how to properly uninstall the old drivers

  http://support.Microsoft.com/?kbid=269155

• ESXi host and VM hardware upgrades

  Hi all

  I pretty well know the answer to these questions (I like to read manuals), but I just wanted a few reassuring those who have ventured in front me.

  1 / when the upgrade to ESXi hosts of 3.5 to 4.0, it is my understanding that there is no real emergency in the upgrade of the host of the virtual computer (tools and hardware to version 7) as vSphere 4.0 will run happily with the older virtual machine (but without the new features).  However, I am wondering if anyone has experienced problems do not upgrade the machine virtual shortly after the upgrade of the host.  My intention is to do it very shortly after, but sometimes the best-laid plans go out the window in my role, so I'd feel comfortable if I new I could run the old VM indefinitely without any problem.

  2 / how 'security' is upgraded version of the VM from 4 to 7 material?  VMware I don't expect any problems, but I would like to know if anyone has experienced problems that can cause interruptions of service extended to the VM guest.

  Thanks in advance,

  Steve.

  1. I would separate between VMware tools and hardware upgrade. New tools not only to upgrade virtual hardware drivers, they also inflating to update and other features VMware uses to communicate with the guest operating system. In my opinion, you should pass the VMware tools as soon as possible. I can't say for sure if you have any questions without upgrading. My personal opinion/experience, is that during the "normal" old tools will.

  The hardware upgrade should not too important. In environments with hundreds of guests, you will actually have to update all hosts (in a cluster) material in order not to lose the capacity of invited guests 3.5 vMotion.

  2. the only issues I've had so far with the upgrade of the hardware have been networked. I had a few VMs to reconfigure the network manually after the upgrade.

  André

• Snapshot before VM hardware upgrade?

  Hello people,

  I read a lot of conflicting information around it, so thought I would ask here.

  We are going to be upgrade to vSphere 4.0 soon and of course will focus on the hardware upgrade of the virtual computer to version 7.

  Now, if I take a snapshot before you do the upgrade of HW and it goes pearshaped can I go back to the snapshot and the server will work?

  Or is it a one-way change, even with a snapshot in place?

  Same Xtravirt, which are usually about money, seems a bit confusing:

  ()http://xtravirt.com/do-i-upgrade-vmware-virtual-hardware-version-7( )

  They say:

  "When you upgrade virtual hardware version 3 to version 7, the upgrade is irreversible, even if you take a backup of virtual machine or a snapshot before you perform the upgrade.

  Then later in the same article:

  "using snapshots will give you the opportunity to come back if there is a problem."

  Thanks in advance.

  HW version 3 refers to the VM for instance ESX 2.x (see KB1003746 - versions of virtual machine hardware)

  I never upgraded to this version, so I can't say whether this is true or not. However, it is possible to return to a HW version 4 improved virtual computer. VUM proposes explicitly to take a snapshot before upgrading hardware.

  André

• HPlaserjet3390: My Laserjet 3390 offers more double-sided printing after upgrading windows 10

  My all-in-one worked perfectly but after windows upgrade 10 I can't solitaire to print double-sided and does not

  as one more option.

  How can I get print double sided once again.

  Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If the device does not have a double-sided hardware unit, then you can not do Automatic duplexing, but you should be able to do duplex printing Manual (print odd sides, reinsert the paper print same sides) if the demand for source document and printer driver supports this.

• Cannot print after upgrading to Sierra

  After the upgrade to Mac OS Sierra yesterday, I was unable to print on my Canon Pixma MX892. The Canon site says there is no update driver for this OS. When I try to print, I get an error "Failed to filter" and my printer spits out a blank sheet.

  Finally, I am informed that cgpdftoraster crashed.

  Taken from the Canon Website:

  "Canon is working with Apple to solve some problems of compatibility between Mac OS X Sierra 10.12 and printer drivers for Canon PIXMA inkjet printers.

  Everything is actually to solve these problems.

  Deeply, we apologize for any inconvenience you may encounter.

  Please see ourKnowledge Base article on how to print correctly with Mac OS X 10.12. »

• Cannot print after upgrade. Printer works with Explorer

  When I try to print from a web page in Firefox, I get no response in the print area. It started when I upgraded from the previous version of Firefox. Before that, it was fine. My printer is an OKI C3400 and works very well with IE9 and everything. I uninstalled and reinstalled Firefox n success. I am so frustrated, I put IE as my default browser.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

• Satellite 4090xcdt - Question about hardware upgrade?

  Hello!
  I want to upgrade the hardware in my old satellite 4090xcdt so I want to know what is possible.
  1. HARD drive: is there a maximum or something else?
  2 DVD: is it possible to replace the CD on a dvd player? How can I remove the cd player?
  3 CPU: is it possible to replace the CPU with a bit more recent? If so, how?

  Thank you in advance!

  Hello

  This unit is an oldie. It s about 7 years and as far as I know it has been bundled with a 4 GB HARD drive.
  Unfortunately I put t believe that more HARD drive be recognized on this laptop.
  The series XCDT supports 4GB max and XDVD series supports hard drives 6 GB.
  Xdvd models were shipped with a DVD - rom drive and these models have been supported: SD-C2102 and SD-C2202
  In addition, it is not possible to upgrade the processor.