Captivate 8 - video integration problems. Video won't play Web server when published under the title of HTML5. When to play the video it works not embedded.

Similar Questions

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  This message appears when I start my computer.  I think my pc has viruses/malware.  My antivirus firewall program wouldn't start / missing.  I gave my pc days back and managed to restart the firewall.  But I get the message... There was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  To clean malware, take a look here and try what is below if you still have the problem.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Try this program because it will show you everything that tries to run at startup.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Captivate 6: Impossible to get any JavaScript to run when published under the title of SWF

  Version 6.0.1.240

  Windows 7 x 64

  I have a button with a 'Execute JavaScript' action and event failed to get a simple alert("hello"); to work when published under the title of SWF.  I tried to publish with each different versions of Flash Player.  JavaScript works well when it released as HTML5.

  If you want to that JavaScript to manipulate SWF/HTM Captivate content then you need to get your Flash global security settings to approve the location of the output folder:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/how-to-set-up-Flash-global - security

• DLL from there was a problem starting C:\Users\Carol\AppData\Roaming\wupdate\pnpsql.soft the specified module could not be found

  This message keeps popping up how much - what I do?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the above mentioned error message. I would like to know information about this problem to help you better.

  (1) where do you get this error message?

  (2) that you get this error message while opening any application?

  In the meantime, please follow the following suggestions to solve the problem.

  First of all, start the computer in safe mode and see if the problem occurs in safe mode.

  Step 1: See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  In addition, open the link and follow the instructions to get the event logs, so that we can see which application is defective.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• With more than 2 GB videos for veiwing h264 problems, they won't play in windows or version mac et seq., less than 2 GB, they play very well.

  I work for a video company, video encoding, the only problem we have is Firefox plays videos not encoded as H 264 (1080) greater than 2 GB, because they do not play. I tried the two latest version 9.0.1 in mac and windows and no change. In Internet Explorer, Chrome, the video plays well. Is there a file limit in Firefox? I read somewhere else that FF also has problems downloading files of 2 GB, do not know who is bound. Any help would be appreciated.

  Firefox does even not play H264 content by default. For HTML5 video, it will play OGG / Theora and WebM, but a plugin is necessary for the H264 content.

• Video won't play in IE but works in other browsers

  I have a flv video on a page that was placed there by using Dreamweaver CS4.  He plays in all the other browsers I test except IE7. (Firefox, Chrome, Safari) Others make sure that it dooesn can't space in IE7 also.  Don't even play when I test in "Preview in browser" in DW. The page passes validation. Impossible for the life of see me why. Any ideas.

  http://www.princetonmarketing.NET/new/PMG-production.html

  You have all these references to the scripts, but I'm sure you don't need all.  Is this an old page created in an earlier version of DW?

  Try commenting on JavaScripts running on your page and then systematically re - introduce 1 at a time to see where is the culprit.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• The video camera work not blackBerry Smartphones

  Running a BB Curve 8900

  Recently updated to V5.0.0.461 (Platform 5.2.0.42)

  My problem is when you try to use my camera to the video format, I get "unable to start recording.

  I AM able to take pictures very well.

  I have a lot of available memory, as I have a card of 4 GB with about 155 MB used. Memory is obviously not the issue.

  I didn't know all of the messages that the status of this problem or anything close for the moment. (Except that I ran out of course)

  My provider is TMobile - but the software was from another provider. Overall, the phone has will work perfectly on the 5.0.0.46 1 software, a few things here and there but I have worked through them.

  Help with graphics problems would be great!

  Thanks in advance

  For the closure of the post office. I did resinstall the OS and not had another chance with the recording.

  Then, I went and checked again the location of files that would be recorded on the card.

  Still no luck then I created a folder on the press card, baptized "vids" and chose this location of files on the media as a location map that would be saved the vids.

  Tried to save again and it worked!

  Thank you

  Jason

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Problem with links to another Web page when using the Internet

  I can open any website, but when there is another highlight link to another Web page I get an "Error on Page" message down to the left of the screen when I try to access it. When I point out this message, I get the message "no such interface supported." This is on a HP Pavilion dv 7-3173 nr notebook new. I use Internet Explorer 8 and the operating system is Windows 7 Home Premium.  I have disabled the firewall without success and it occurs either wireless or ethernet connection.  A typical error detailed message is as follows:

  Webpage error details

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; OfficeLiveConnector.1.3; OfficeLivePatch.0.0;. NET4.0C; BRI/1)

  Timestamp: Sat, December 2, 2010 17:27:10 UTC

  Message: No such interface took in charge

  Line: 2

  Char: 11896

  Code: 0

  URI: http://www.durabuiltbuildingproducts.com/menumachine/menumachine2.js

  I would appreciate any suggestion or help.

  Hello

  Try to download and install Firefox on the link below and post back if you still have the problem by clicking on the links within Web sites.

  Firefox

  Looking forward to hear from you.

  Best wishes

  DP - K

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• My password for the integrated on my HP OfficeJet 8100 Web server does not work

  I entered my password, and kept the username by default (admin), but now I can't access the pages of EWS (locked).  How can I reset EWS (or the full printer) to the factory settings?

  Maybe my password is too long?  (20 characters)

  Thank you!

  Hello

  Please, make sure that you type the user as administrator when you type the password, then check to see if that can help you.

  If the same persists, reset the network settings, which will also reset the administrator password:

  

  If necessary, print a Network Setup page to find the IP address if it has changed, which can be done by pressing a second time the summary and the button wireless on the printer control panel.

  Kind regards

  Shlomi

• Display problem multiscreen-cannot configure monitor two (side-by-side) with the ability to work on both

  Hi all

  I am trying to configure Win7 so I can use two monitor (side-by-side) with the opportunity to work on both. For example, to keep the email open on one monitor and use other software on monitor B.

  Here is a screenshot that shows the settings I use. Can someone please take a look and advise?

  Thank you!

  Todd

  

  The graphics card may have the drive necessary to operate 2 monitors on a split bar but monitors also communicate with the PC to tell him what the monitor can handle using the SDC.

  It cannot accept the two sets of data SDC on the same entry even if theoretically they have the same data to send.

• Hello, I'm Matthew Alexander, and I have a problem with SEO for 2 Web sites. One of the sites SEO a Go Daddy and one of them is not. I am currently using a mac. Is their anything I need to do?

  @

  Hello

  Positions of sites in our search results are determined based on hundreds of factors designed to offer end users to useful and accurate search results. some basic steps are

  1. keyword research

  2 content, make sure you have a unique and original content. No duplicate content

  3. on the back link of quality sites, no spam.

  and so on.

  I've added a few links where you can start, hope this helps

  See

  Works by Google search

  https://www.Google.com/intl/en_US/insidesearch/howsearchworks/index.html

  For more information on improving the visibility of your site in Google search results, I recommend that you visit Webmaster Academy that gives an overview of the key concepts for maintaining a Google-friendly site.

  Intro to the Academy of Webmaster - Webmaster tools help

  Please let me know if you have any other question.