Can I update last Directx 9.0 c?

Similar Questions

• Performance of poor game after the last update of DirectX. Can't go back.

  SUP ppl,
  I did a clean install of Windows 7 on my laptop Dell D510 crap, then install the drivers for my on-board Intel 915GM video card. I then installed brothers in arms and hidden and dangerous 2. When I started up the two games, they ran very choppy, practically unplayable. After some troubleshooting, I realized that if I installed the DirectX 9.0 c time (installation offline, by using the web update does not help) on top of the DirectX11 that comes with Windows 7, I started again two shooting games and they ran virtually perfect.

  After a while, I thought I'd go to install the Feb 2010 update of DirectX to see if the games would be even better, but after the update, games work again restless. I mean, BiA is running at 6 frames per second on average, H & D2 a little better at about 12 frames per second on average.

  Given that I had not many apps installed, I format the drive and did a clean install again, reinstalled both games, they ran like _, so I reinstalled the redist to 9.0 c DX, games went very well and I made the mistake of trying the latest version of DirectX again, and games ran as _. Once again! Whenever I run the update to 9.0 c, the screen with the installation just flashes and then I get a message saying that the components are already installed.

  I really don't want to reinstall Windows 7 again. I tried restoring the system (before the DX installation), Windows Update, the System File Checker, I didn't even look in the 9 .0c *. CAB files, search the Windows folder for files, took possession of them, then deleted, but the update always refuse to work. I'm here to ask if the following is possible:

  1 go back to the original DirectX 11, so I can install update DX 9.0 c.
  2 uninstall/delete the DirectX (on the MS site, it says it is not possible and I have to use the system restore.) WOW)
  3 anything else someone can suggest. Please, I beg you.

  Also, I read a ton of messages on the net saying that you need not DX 9, because the DX 11 is backward compatible, so on and so of suite, so please don't need to hear all that again.

  Thank you :|
  ~ A

  Hello

  See the link for the steps and more info - http://windows.microsoft.com/en-US/windows-vista/Run-DirectX-Diagnostic-Tool . Have you tried that? If Yes, what happened?

  Erwin, I am not 62; I'm 16 with 46 years of experience... Think positive... Think Differnet

• How/where can I get an update of DirectX?

  Updates

  How/where can I get an update of DirectX?

  Check here--

  http://support.Microsoft.com/kb/179113

  Tom Ferguson

• Music plays not after IDT set to update last night (HP automated update) how I can push the patch?

  I was warned of an HP update last night.  After the update is complete, Itunes/MS media player/You-Tube...applications are unable to play.  Check installed programs and the only update listed was one of IDT drivers.  How can I go back to the previous version?

  Hello

  My suggestion: use Windows Restore to restore the machine or please follow the instructions below to check and fix:

  http://support.HP.com/us-en/document/c01912228

  Good luck.

• I can't update my first macbook pro CC 2015 but need to edit a file that was saved the last with new version 2015.1

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Would be very grateful for any solution... !

  Hi Eclumes,

  I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?

  I already tried to deinstallate and reinstallate to the program...

  Are you a specific error when you try to update the application?

  In the affirmative, please follow these troubleshooting steps:

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Thank you

  Ilyes Singh

• Updated FireFox, restarted and now it will not open the browser, even if the icon does not appear in my taskbar. Was fine until the update last night. Win8.1 running

  When I move the mouse over the icon in the taskbar that appears after that I have I dbl-clicked on the icon on the desktop, you can see a miniature version of the browser open as usual, unfortunately, the browser will not open upward on the desktop. I've deleted and reinstalled several times. It has worked very well until I did the update last night.

  Machine features:
  8.1 to win
  16 GB of RAM
  3 video concerts
  Processor AMD FX-6200 6 3.80 Ghz
  64 bit

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or perhaps 8.x for Windows search of charms bar bar?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Since the update last night (05/02/2013) we are unable to access the internet.

  My son says that there is an update last night when he was on the computer and the browser only, that we can use to access the internet now is Windows Internet Explorer. I tried all of the recommended patches and it still does not work.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
  3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

  IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

  After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

  • (Windows 32-bit) C:\Program Files\Mozilla Firefox
  • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
  1. Go to the Windows Start menu and click on 'computer '.
  2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
  3. Find the folder "Program Files (x 86)" or "Program Files".
     • On 32-bit Windows, double-click the Program Files folder to open it.
     • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
  4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

  Now, go ahead and reinstall Firefox:

  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Can I update my BIOS using a stick USB Mem on Tecra 8200

  I want to update BIOS for the last level v1.6.
  I don't have a floppy drive selectabay, just a DVD player.
  Now, it would take 3 DVD to do this I assume IE duty in the order of the day for more BIOS later.,.
  v1.4 then 1.5V and finally v1.6.

  Is the Board of Directors supported the start-up of a stick USB Mem, or a USB FDD.
  Any thoughts on the best way to do it.

  Is there a utility I could download and do it from windows...

  My system is a 820E. Tecra 8200 series.

  Thank you.

  I doubt that you can not do this.

  Toshiba page offers a trad BIOS update that can be updated by using only the FDD drive.

  Please check this update of the BIOS Toshiba how to document:
  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  Concerning

• Game to "Save history" for 30 days, can only view last 7 days - how can I view the longer history of 7 days?

  "Save history" set to 30 days but can only view last 7 days of history - how can I view the longer history of 7 days?

  According to your troubleshooting info, you have 2 set preferences to update the:
  Browser.history_expire_days
  7

  Browser.history_expire_days. Mirror
  7

  In the address bar, type Subject: config and press ENTER. The subject: config "This might void your warranty!" warning page may appear. Click on that I'll be careful, I promise! to continue on the subject: config page.
  Search for the preference browser.history_expire_days. Right-click on it and select reset. Do the same for other preferences.

• How can I update Tiger operating system without an administrator password?

  I got an iMac using OS Tiger, last updated in 2010. I did not have the administrator password and have not been able to find out what it is. How can I update software?

  You can not. You need to get the original Mac OS X shipped with this computer. Contact Apple to order. Make sure that you have the serial number of the computers and the ID of the model practice before calling:

  Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.

  Contact product support and tech: Contacting Apple for support and service - this includes

  numbers of international calls...

  Mac App Store: Apple - Support - Mac App Store.

  For iTunes: Apple - Support - iTunes.

  Writing an effective question of communities of Apple Support

• I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

  NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

  Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

  Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

• where do I put update to directx, what file?

  I am a complete novice when it comes to computers. Where do I put update to directx, what file?

  Hello

   
  1. What is the operating system installed on your computer?  Click on the below link mentioned for assistance on this.
  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
   
  2. are you trying to install Direct X on your computer and get you an error code or message?
   
   
  For the installation of Direct X on your computer, visit the link below
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113
   
  You can read the article on the web page which the link mentioned below.
  DirectX: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions
  (This article is also applicable to Windows Vista)

• I have Microsoft Money 2006 how can I update and keep the info?

  I have Microsoft Money 2006 how can I update and keep the info?

  Hi NRHand7,

  Microsoft has stopped selling money on June 30, 2009. The last activation of version (more Money, or money 2008) required in order to be fully functional.

  For more information, you can consult the following articles:

  What is Microsoft Money Plus sunset?

  Money Solution Center

  We can refer to the following articles and check if it helps.

  How to export and import account information in Microsoft Money

  How to remove and reinstall Microsoft Money

  You can also post your query in Microsoft Money Forum to get help.

  Microsoft Money

  Hope this information is useful.

• Can't update without Windows of self-destruction!

  After the update a few weeks ago... Bad software removal tool... My father PC had white exclamation points all on that screen P.O.S.T.... then the screen would go and NOTHING...! Restart, and then go to the Startup Repair tool... Windows Startup Repair tool cannot fix... you want to restore?... long story short... so the only thing that worked was a REINSTALL FACTORY...

  NOW... I can't update anything... Update Windows and not even a no driver for the graphics card! If I... I will return to white exclamation on fullscreen P.O.S.T.... then NOTHING... points! I've restored the system several times and tried to update, only to have this accident to happen once I update... There's something like 83 updates and it's too much to try to step up to the problem... Heck I think is not yet get it until the first service pack!

  On top of OFF... Microsoft tool for support does not even recognize its product ID... even when I enter it manually... all YES, I'm in the correct information!

  As you can imagine, it's really a bad situation and bad support (no I don't want to pay Microsoft an another $50) it made it worse. After buying Windows since Win95, Xbox, 4 Xbox 360 (thanks to free material you knew was broken) and a Zune... I really think to change and do not return!

  Someone at - he lived it and managed to isolate the problem... I have the exact system he has, even screen, same graphics card, etc... and I am able to update without ANY problem!

  Thanks in advance! And sorry if I'm angry... I worked on it for about the last three weeks!

  Dan

  If you have a brand of computer, HP, Dell, etc, you are not eligible free Microsoft Support.

  All support is the manufacturer of your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.