Can I use a SATA drive on my SR1090nx?

New here

Hendrikus

Hello

Based on the following specifications, you can not:

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00064822

Hope this hepls.

Tags: HP Desktops

Similar Questions

  • Can I use a SATA drive in the virtual host as a SCSI disk in virtual machine?

    I'm under (64-bit) 2008 R2 RC as host and VMware Workstation 6.5.2. I installed a linux VM, the distribution doesn't really matter, but now I use Debian 5.01 AMT64. I am trying to use SATA drives to the host as drive virtual in the VM, but not successful. Here's what I did.

    -In the virtual machine of VMware Workstation. Add - & gt; hard drive - & gt; use a physical disk - & gt; Choose the device (use entire disk) - & gt; Finishing

    The drive is affected as IDE drive. Here's the first question, I can use it as a SCSI drive? There are only 4 available in CD-ROM and VM IDE drive takes one. I want to be able to use 10 disks.

    -L' use above configuration, if I start the VM, I don't know where devices are. I can't find any device in the name of/dev/hda, / dev/hdb etc.

    Here is my second question. Where are the devices on a virtual computer that were created as virtual disks?

    Hello

    with 2 k 3, you won't have these problems.

    VMware affect physical as IDE disks if the host sees as IDE. He attributes as SCSI host sees the SATA or SCSI drives.

    If you want to change that - you can use this old post of mine. If the descriptor of uncertain post before use you it so that I make the changes.

    Ulli

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

  • Can I use the SATA port connected to an optical drive to plug in a hard drive?

    I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

    Thanks, CHemming

    CHemming,

    I've not seen UEIF support in the existing BIOS.

    If your demand on a 3T led, re - consider a maximum of 2 T.

    If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

    The cage of your system hard disk will support 3 hard disks. Manual upgrade service

    All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

    When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

  • Satellite A300 - where can I find the SATA driver?

    Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
    I tried to find it here:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    There are a lot of drivers, but none for SATA.
    and here: http://downloadcenter.intel.com/
    Here I can't find appropriate for my model injector.
    Thank you in advance for your help!

    Hello!

    The SATA drivers are in the Intel Storage Manager, so you need to download this package.
    You can find it on the Toshiba site and on the Intel Web site.

    Check again for Intel Storage Manager Web sites.

    Good bye

  • Can I put my SATA drive on my PC?

    I have an old HP Pavilion (very old) with 80 GB SATA a1220in. Yes, you think I do with such an old PC, but it is appropriate for my use, as I'm not a hardcore gamer or anything.

    So, what I want to ask is, can I put my hard drive on this PC? It's 80 GB which takes no time to fill up, and yes I can use the external hard drive, but I don't want to attach an external hard drive whenever I start my PC. And added, I want to Dual boot in another operating system.

    Most of the time the drives built for the Protocol SATA II will also work with the controller in the PC in discussion.  It's questionalbe whether SATA III or SATA 6.0 GB drives will be unless they expressly declare that they can be made to work with it.  SATA II or SATA 3.0 GB usually can be changed either with a rider or a software to run on the SATA I controller.  The link you show referencing the SATA I or SATA (serial ATA-150 - what your motherboard calls it) explains the old SATA: SATA revision 1.0 - 1.5 Gbit/s - 150 Mbps

    I suspect only an old SATA revision 1.0-1.5 Gbit/s - 150 MB/s will be hard to find, but a SATA II drive, which can be set with a jumper will work fine. See this page from WD:http://wdc.custhelp.com/app/answers/detail/search/1/a_id/1337/c/130/p/227, 294

    BTW: Find a SATA II WD drive which has the jumper and it will be fine.

  • Satellite U300-14 b: can I use the graphics driver for the Intel page?

    My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

    The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

    I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

    Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

    Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

    > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
    Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

    Best regards

  • Can I use two hard drives in the Qosmio G40-10th

    Anyone know if it is possible to install two hard drives in this laptop. I read simewhere that it had to be two slots hard drive in it?
    If so where is it located?
    Ther would be all issues around extra heat that could be generated etc.?

    I have had mine for about 5/6 months and have had a screen replaced (defective backlight).
    Many other people have had problems?

    I wonder if its worth buy the extended warranty.

    See you soon.
    Sunil

    Hello

    As far as I know this laptop takes support only a single HARD disk.
    Check the underside of the laptop. Do you see a second slot (cover) the second HDD?
    I imagine that it has a single HARD drive Bay, and so only a single HARD disk can be used.

    I m not a G40 owner and, therefore, I cannot comment on any other issue.
    But each computer technology may start to malfunction it is why I always recommend buying an extended warranty.

    Best regards

  • Satellite P200-1 - can I use 2nd HARD drive?

    Hello

    I am always working on my Satellite P200-1 and now, my HDD1 is full.

    I see that there is a location for a second HDD. But I can't find the plug!

    Therefore, it is possible to connect a second HDD on my satellite P200-1BY? Because I bought a new HARD drive and I can't plug it, I only have 7 days to return the HARD drive to the store.

    Thanks for your replies!

    Hello

    If the connector to the second HARD drive is not available there is no way to use two internal hard drives.
    This HARD back and buy HDD external, placed in the HARD disk box. This HARD drive you can connect using the USB cable and it is the best solution for you.

    I guess that HARD disk internal, you have lots of data that you don't need every day and you can save it to external HARD drive. So you can do free space on the internal HARD disk.

    I do the same.

    Good bye

  • Can I use 2 hard drives on the Satellite A200-1YX

    Hello, who knows if it can work 2 hard drives on the A200 1YX.
    In the manual is written there are 2 locations for hard drives, but it says that for some models of Satellite A200.

    Can I use 2 HDD on Satellite A200-1YX?

    As mentioned by user above, different Satellite A200 series are present on the market.
    Some supports 2 hard drives and some as a single HARD drive.

    But both series are equipped with a second Bay I recommend you simply remove the cover plastic that holds the second HARD drive Bay and check if the HARD drive connectors are available.

    Good bye

  • can I use a flash drive to complete the main memory

    I read somewhere that a flash drive can be used to complete the memory on your desktop

    Hello

    ======================

    ReadyBoost in Windows 7 supports 8 drives and a total of 256 GB. For each device - the device
    must have an access time of 1ms or less. The device must be capable of 2.5 MB/s read speeds
    Random 4 KB indicates the spread uniformly across the entire device and 1.75 MB/s write speeds for 512
    KB random writes spread uniformly across the device.

    Understand the ReadyBoost and the question of whether it will Speed Up your system
    http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

    More information that might help:

    ReadyBoost
    http://www.vista4beginners.com/ReadyBoost

    What is ReadyBoost
    http://www.winvistatips.com/ReadyBoost-T25.html
    Explore the features: Windows ReadyBoost
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    Understand the ReadyBoost and the question of whether it will Speed Up your system
    http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

    DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
    many of them are or stretching at least the truth. Look at the sides of the player below and buy
    a you know is FAST.

    Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
    is more than you can use it for storage. And you need a fast reader.

    ReadyBoost - list of speed Flash memory
    http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

    How to find the index of ReadyBoost speed
    http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

    Speed tests USB Flash Drive - any size car - link to the utility USBDeview
    http://usbspeed.NirSoft.NET/

    Publish a speed test of your USB - also a link to the utility USBDeview flash drive
    http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

    http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

    http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

    Keep an eye on ReadyBoost with Windows 7 performance monitor
    http://blogs.TechRepublic.com.com/window-on-Windows/?p=2257

    Monitoring of ReadyBoost on Windows 7
    http://blogs.msdn.com/b/saveenr/archive/2009/05/02/monitoring-ReadyBoost-on-Windows-7.aspx

    I hope this helps.

  • Can I use an optical drive as a drive backup of the file history?

    I want to use a DVD drive as a backup... win now called historical file... by car.  Flash and HDs readers see an option, but not internal or external optical drives.  They can be used?

    What operating system are you talking?

    An external drive, network, or the Cloud drive are seen the best options. DVD players are not seen as viable options. Read this microsoft document on setting up a historic file player.

  • Can I use my hard drive as slave on my laptop?

    My Dell Dimension 9100 does not work and I would try to run the hard drive as slave on my PC toshiba laptop. Is it possible or it would have to do on another office?

    Thank you
    Danny

    Hey Danny,

    ·         What exactly is the problem you are having with the Dell computer?

    Most laptops will not accept that the two internal hard drives.

    You will need to check with the manufacturer of laptop for more information on the connection of two hard drives to your particular model.

    You can also use a USB hard drive which you can then use to retrieve the data on your hard drive to the laptop via the USB port.

  • You can mix SAS and SATA drives in a RAID 1 PowerEdge T110 II configuration

    Hello

    I have a RAID 1 configuration and one of the two drives in the array has failed.  I've removed and replaced by another drive hoping the Dell Perc adapter H200 would rebuild the mirror automatically, but it does not.  In Server Admin OpenManage virtual disk displays as degraded.  The issue I think may be the replacement drive is SATA where the original was SAS.

    Is there a way you can make the adapter accepts a SATA drive or is it simply not supported?

    SIV

    Hello.

    Dell controllers, including the H200 are not supported mixing SAS, SATA or SSD in the same table. They may, however, each separately constitute a virtual disk on the same controller. Consider replacing the disk failing another identical or higher capacity SAS drive.

  • Can I use Vista Ulitmate drive to install a copy of Vista home Premium if I have my key Premium?

    Can I use my Vista Ulitmate drive to install a copy of Vista home Premium if I have my Premium key on my old laptop that needs to be reformatted and I can't find my Premium drive?
    Thank you

    You can if it's a Genuine Microsoft Vista DVD, but is NOT if it's a Dell, HP, etc the recovery disc.

    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 8 can't find my SATA drive (2). It does not appear in disk management, but it appear when I open the tab of properties on any drive and click displays all disks. What should do?

    I bought a new computer (custom build) and Frys Electronics put it together for me.  Disk 0 is a 128 GB SSD, 1 disk is a SATA 2 TB drive, and disc 2 is a 1 TB SATA drive. Readers of 0 and 1 have been configured correctly when I installed Windows 8 but Drive 1 was not found\initialized. Player 2 does not appear in the disk management window, but when I click on properties on any drive, and then on the "hardware" tab, the drive appears.  If I can get windows to find it, I can go configure manually.  DiskPart cannot find disc 2 in the 'LIST' command and when I get in car 2 on other commands that require a number of disc, nothing happens.

    What should I do?

    Thank you.

    I ran an old Western Digital (the two SATA drives are WD) diagnosis and there are 1 OK to drive.  I tested it and it doesn't have a writing that test a few zeros.  I thought that it was a bad drive and I must return to the seller.  The next morning I tried the WD diagnosis again and this time he passed.  The app then allowed me to format it and it assign a drive letter.

    It seems to be OK now, but I'm not load all the files on it again.

    Thank you all for your support.

    Don

Maybe you are looking for