can I use Samsung 850 EVO 500 GB m2 for 15 Alienware?

can I use it?
 

Samsung 850 EVO 500 GB M.2 3.5 inch SSD (MZ-N5E500BW)

Yes! I have 2 on my lap :)

Tags: Dell Products

Similar Questions

  • Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

    I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

    In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

    Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

    This is Mac OS extended (journaled) with a GUID partition map.

    OS X will only be installed on a properly formatted disk.

    HTH

    Leo

  • EliteBook 840 G2: EliteBook 840 G2 Compatible with Samsung 850 EVO gbs 2.5 SATA III SSD internal (MZ-75E500B/AM)

    I am issued an EliteBook 840 G2, with a HARD drive.  I want to upgrade to an SSD.  Most of my colleagues use the:

    Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD (MZ-75E500B/AM)

    http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_3?ie=UTF8&QID=1...

    Is this compatible with the EliteBook 840 G2?

    Thank you!

    kengel

    Yes it is compatible

    Please read page 16

    http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04560057-2.PDF

  • HP Jet 11-d000nd: can I put the 32 GB SSD in the stream HP 11-d000nd with a SAMSUNG 840 EVO 500 GB SSD?

    Can I put the 32 GB SSD in the stream HP 11 - d000nd with a SAMSUNG 840 EVO 500 GB SSD?

    No, upgrade to the 32GB of internal storage mem is not possible.

  • Dell Latitude e5440 - Samsung 850 EVO mSATA SSD not recognized

    I bought a new 500 GB Samsung 850 EVO mSATA SSD for my Dell Latitude e5440 (running Windows 7 Pro).  The new player was not visible in 'Computer', so I downloaded, installed and ran the software Samsung magician.

    Samsung software shows that the drive is present.  And there is a button "Validate" - I clicked on - and now: ' Drive Health Status: Good ' and ' serial number: true "appears.

    However, the SSD is not visible when I double-click on computer and the Samsung software States:

    a. "AHCI Mode. Disabled (IDE or RAID).  AHCI mode is necessary for the best performance of the SSD. »

    b. SATA Interface s. o. cannot detect SATA interface details.

    c. s. o. OS OS optimization is supported only for disks using an operating system drive.

    Question 1: Activation of this AHCI mode will allow Windows to recognize the SSD?

    Question 2: How do I?

    Question 3: Activate the AHCI mode "switch off" (logout) my HDD 2.5 "?  (I want to keep Windows 7 to 2.5 "HARD disk and install Windows 10 on the SSD to have a dual boot system, until I got used to Windows 10).

    Inside of your battery compartment is a label with your license key Windows 7 OEM on it.  Photograph it.

    Download and prepare a USB key with a copy of Windows 10 TH2 Pro.

    Remove the disk 2.5 "and connect the new drive mSATA.

    Boot the system to the USB key.  10 Windows Installer should be of the presence of the DSS and will allow you to do the installation of Windows 10 - which in turn is almost certainly going to install the network driver suitable for your system without the need to add anything else.

    USE your 7 product key when prompted and you should be all set.

    Once this is done, you can reconnect the disk 2.5 "If you want to do - but remember that 10 installation is done separately from the 2.5 disk".

  • 2009 Mac Pro is plant after the boot Samsung 850 Evo 250 GB drive upgrade

    The system seems to hang mysteriously every two weeks. It restarts every time login screen. I tried to run DiskWarrior 5.0 on the system, but it doesn't seem to help.

    I've been thinking out the disc and its replacement with an OWC (mercury Accelsior E2) or a conventional hard drive. Another option could be upgraded to the latest OS X Server 5.0.3.

    2009 mac Pro

    Mac OS X Server 10.6.8 - stock (no Trim Enabler)

    8-core 2.26 GHz, 6 GB RAM, nVidia GeForce GT 120

    Highpoint RocketRAID 2314

    Interval since the last report of panic: 734359 sec

    Panic since the last report: 1

    Anonymous UUID: E2906FE3-AD37-43A4-9D1C-5D313A9E42B5

    Fri Jan 15 20:55:31 2016

    panic (the appellant 2 cpu 0xffffff7f80cc8b4d): "AppleAHCI: location (0) reused, newFIS = 0xaaef8027: 0x00000000: 0x00000000: 0x00000000, currentFIS = x 0 00358027: 0x403cb6a0: 0x00000000: 0x00000010, PxCl = 0x00000000 PxSact = 0x00000000\n"@/SourceCache/AppleAHCI/AppleAHCI-217.0.5/AppleAHCIPort.cpp:2801.

    Backtrace (2 CPU), Frame: Return address

    0xffffff8087943b00: 0xffffff8000204d15

    0xffffff8087943c00: 0xffffff7f80cc8b4d

    0xffffff8087943c90: 0xffffff800053c225

    0xffffff8087943d00: 0xffffff7f80cc71b9

    0xffffff8087943da0: 0xffffff7f80cbce8d

    0xffffff8087943dd0: 0xffffff7f80cbd29a

    0xffffff8087943e50: 0xffffff7f8117325d

    0xffffff8087943e90: 0xffffff7f811738e9

    0xffffff8087943eb0: 0xffffff7f8117348c

    0xffffff8087943ed0: 0xffffff7f811768f0

    0xffffff8087943f60: 0xffffff8000285b66

    0xffffff8087943fa0: 0xffffff80002c8527

    Extensions of kernel in trace (with dependencies):

    com.apple.iokit.IOAHCIBlockStorage (1.6.4) @0xffffff7f8116e000-> 0xffffff7f81182ff f

    dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

    dependency: com.apple.iokit.IOStorageFamily (1.6.3) @0xffffff7f80d59000

    com.apple.driver.AppleAHCIPort (2.1.7) @0xffffff7f80cc2000-> 0xffffff7f80cd8fff

    dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

    dependency: com.apple.iokit.IOPCIFamily (2.6.5) @0xffffff7f8081d000

    com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000-> 0xffffff7f80cc1fff

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    10K 549

    Kernel version:

    10.8.0 Darwin kernel version: kills Jun 7 16:32:41 PDT 2011; root:XNU-1504.15.3~1/RELEASE_X86_64

    Name of system model: MacPro4, 1 (Mac-F221BEC8)

    Availability of the system in nanoseconds: 130647334321206

    discharged kexts:

    com.apple.driver.AppleIntel8254XEthernet 2.1.3b1 (0xffffff7f80f07000 addr, size 0 x 118784) - last unloaded 87066847159

    kexts responsible:

    com Highpoint - tech.kext.HighPointRR 1.1.1

    com.apple.driver.AppleHWSensor 1.9.3d0 - last load 26409548610

    com Apple.nke.PPTP 1.5

    com Apple.nke.L2TP 1.5

    com Apple.filesystems.autofs 2.1.0

    com.apple.driver.AppleTyMCEDriver 1.0.2d2

    com.apple.driver.AGPM 100.12.31

    com.apple.driver.AppleMikeyHIDDriver 1.2.0

    com.apple.driver.AppleUpstreamUserClient 3.5.7

    com.apple.driver.AppleMCCSControl 1.0.20

    com.apple.driver.AppleHDA 2.0.5f14

    com.apple.driver.AppleMikeyDriver 2.0.5f14

    com.apple.driver.AudioAUUC 1.57

    6.3.6 com.apple.GeForce

    com.apple.driver.AppleUSBOpticalMouse 3.7.5

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AudioIPCDriver 1.1.6

    com.apple.driver.AppleIntelNehalemProfile 11

    com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1

    com.apple.driver.AppleLPC 1.5.1

    com.apple.driver.AppleRAID 4.0.6

    com.apple.iokit.IOAHCIBlockStorage 1.6.4

    com.apple.driver.Oxford_Semi 2.6.1

    com.apple.iokit.SCSITaskUserClient 2.6.8

    com.apple.BootCache 31.1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

    com.apple.driver.AppleFWOHCI 4.7.3

    com.apple.driver.Intel82574L 2.1.8b1

    com.apple.driver.AppleUSBHub 4.2.4

    2.1.7 com.apple.driver.AppleAHCIPort

    com.apple.driver.AppleEFINVRAM 1.4.0

    com.apple.driver.AppleUSBEHCI 4.2.4

    com.apple.driver.AppleUSBUHCI 4.2.0

    com.apple.driver.AppleHPET 1.5

    com.apple.driver.AppleRTC 1.3.1

    com.apple.driver.AppleACPIButtons 1.3.6

    com.apple.driver.AppleSMBIOS 1.7

    com.apple.driver.AppleACPIEC 1.3.6

    com.apple.driver.AppleAPIC 1.4

    com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0

    com Apple.Security.sandbox 1

    com Apple.Security.Quarantine 0

    com 2.1.14 Apple.NKE.applicationfirewall

    com.apple.driver.AppleIntelCPUPowerManagement 142.6.0

    com Apple.nke.PPP 1.5

    com.apple.driver.AppleProfileReadCounterAction 17

    com.apple.driver.DspFuncLib 2.0.5f14

    com.apple.driver.AppleProfileTimestampAction 10

    com.apple.driver.AppleProfileThreadInfoAction 14

    com.apple.driver.AppleProfileRegisterStateAction 10

    com.apple.driver.AppleProfileKEventAction 10

    com.apple.driver.AppleProfileCallstackAction 20

    com.apple.driver.AppleSMBusController 1.0.10d0

    com Apple.NVIDIA.nv50hal 6.3.6

    6.3.6 com.apple.NVDAResman

    com.apple.iokit.IONDRVSupport 2.2.1

    com.apple.iokit.IOFireWireIP 2.0.3

    com.apple.iokit.IOSurface 74.2

    com.apple.iokit.IOBluetoothSerialManager 2.4.5f3

    com.apple.iokit.IOSerialFamily 10.0.3

    com.apple.iokit.IOAudioFamily 1.8.3fc2

    com.apple.kext.OSvKernDSPLib 1.3

    com.apple.driver.AppleHDAController 2.0.5f14

    com.apple.iokit.IOGraphicsFamily 2.2.1

    com.apple.iokit.IOHDAFamily 2.0.5f14

    com.apple.iokit.AppleProfileFamily 41

    com.apple.driver.AppleSMC 3.1.0d5

    com.apple.driver.IOPlatformPluginFamily 4.7.0a1

    com.apple.driver.AppleSMBusPCI 1.0.10d0

    com.apple.driver.AppleUSBHIDKeyboard 141,5

    com.apple.driver.AppleHIDKeyboard 141,5

    com.apple.iokit.IOUSBHIDDriver 4.2.0

    com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3

    com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3

    com.apple.iokit.IOBluetoothFamily 2.4.5f3

    com.apple.driver.XsanFilter 402.1

    com.apple.driver.AppleUSBMergeNub 4.2.4

    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8

    com.apple.iokit.IOUSBMassStorageClass 2.6.7

    com.apple.driver.AppleUSBComposite 3.9.0

    com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0

    com.apple.iokit.IOFireWireSBP2 4.0.6

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8

    com.apple.iokit.IOBDStorageFamily 1.6

    com.apple.iokit.IODVDStorageFamily 1.6

    com.apple.iokit.IOCDStorageFamily 1.6.1

    com.apple.iokit.IOFireWireFamily 4.2.6

    com.apple.iokit.IOSCSIParallelFamily 2.1.1

    com.apple.iokit.IOAHCISerialATAPI 1.2.6

    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8

    com.apple.iokit.IONetworkingFamily 1.10

    com.apple.iokit.IOUSBUserClient 4.2.4

    com.apple.iokit.IOAHCIFamily 2.0.6

    com.apple.iokit.IOUSBFamily 4.2.4

    com.apple.driver.AppleEFIRuntime 1.4.0

    com.apple.iokit.IOHIDFamily 1.6.6

    com.apple.iokit.IOSMBusFamily 1.1

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.security.TMSafetyNet 6

    com.apple.driver.DiskImages 289.1

    com.apple.iokit.IOStorageFamily 1.6.3

    com.apple.driver.AppleACPIPlatform 1.3.6

    com.apple.iokit.IOPCIFamily 2.6.5

    com.apple.iokit.IOACPIFamily 1.3.0

    Model: MacPro4, 1, MP41.0081.B07 of BootROM, 8-Quad - Core Intel Xeon processor, 2.26 GHz, 6 GB, MSC 1.39f5

    Graphics card: NVIDIA GeForce GT 120, GeForce GT 120, PCIe, 512 MB NVIDIA

    Memory module: global_name

    Bluetooth: Version 2.4.5f3, 2 service, 12 aircraft, 1 incoming serial ports

    Service network: Ethernet 1, Ethernet, en0

    Service network: Ethernet, Ethernet, 2 in 1

    PCI card: scsi, sppci_scsi_bus, slot-3

    PCI card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-1

    Serial ATA Device: HL-DT-ST DVD - RW GH41N

    Serial ATA Device: Samsung 850 EVO 250 GB, GB 232,89 SSD

    Serial ATA Device: WDC 1.82 TB, WD2002FAEX-007BA0

    Serial ATA Device: ST31000528AS, GB 931,51

    Serial ATA Device: ST31000528AS, GB 931,51

    SCSI device: Equipment of SCSI target @ 0

    SCSI device: Equipment of SCSI target @ 16

    USB device: Keyboard Hub, 0x05ac (Apple Inc.), 0 x 1006, 0xfd300000 / 3

    USB device: Apple USB Optical Mouse, 0x05ac (Apple Inc.), 0 x 0307, 0xfd310000 / 5

    USB device: Apple keyboard, 0x05ac (Apple Inc.), 0x024f, 0xfd320000 / 4

    USB device: USB-SATA Bridge, 0x067b (Prolific Technology, Inc.), 0 x 2773, 0xfd100000 / 2

    USB device: CRCA102 * AF1, 0 x 0764 (Cyber Power Systems, Inc.), 0 x 0501, 0x1a200000 / 2

    USB Device: Hub BRCM2046, 0x0a5c (Broadcom Corp.), 0 x 4500, 0x5a100000 / 2

    USB device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0 x 8215, 0x5a110000 / 3

    FireWire devices: built-in_hub, up to 800 Mb/s

    FireWire device: G-DRIVE, HGST, up to 800 Mb/s

    The panic occurred because the queue of the AHCI is truncated. Thus all things SATA are immediately suspect.

    These extensions on the "scene of the crime" are used ordinary ACHI drivers for SATA drive.

    In your added kernel extensions, you have an additional driver for RocketRAID. If possible, you should remove only while debugging this problem. It was not explicitly on the "crime scene", but it may have made changes that caused the instability.

    In addition, readers could be involved in this problem, as a failed drive can spray data in the wrong section of memory, rewrite of things.

  • connection with a 1 TB Samsung 850 EVO SSD HD problems

    I recently bought 4 Samsung 850 EVO 1 TB SSDS that are recommended by Convergent design to be used with an Odyssey 7 q + VCR. In order to get the images on the timeline of Final Cut, I put on a SATA Adapter USB 3 SSD drives (mine is powered) and use software, once the disc appears on the Finder. Problem is that none of these Samsung 850 EVO appear on the finder. I checked my SATA USB adapter by plugging another brand of SSD drive. It works perfectly.

    Could someone help me with this issue? With a price of around $450, I don't really want these SSD drives to put useless due to a problem of Apple...

    I even tried to force allow the filling with this command: 'sudo trimforce enable', not work.

  • Samsung 850 EVO and TRIM?

    Dear friends,

    Yesterday, I installed a brand new SAMSUNG 850 EVO SSD (120 GB) on my MacBook Pro (mid-2012) and I want to know now I should activate TRIM and is it safe under the OS X EL CAPITAN!

    Once again his SAMSUNG 850 EVO (120 gb, basic version non pro), MacBook Pro (mid-2012) and OS X EL CAPITAN!

    Thanks for the reply.

    Hi, you can activate the trim after you have backed up your important things. I enabled it and don't have any problem and better see the SSD performance, but some of my friends in the face of a gray screen at startup upward.

    Also, I can say that you will not have problem as long as Apple allow you to do something on your Mac

  • Samsung 850 EVO Trimforce

    Hi, I recently installed a samsung 850 EVO my end 2011 MacBook Pro and I have read the weather or not, it is safe to turn on third-party SSD trimforce. But I couldn't find a solid answer anywhere. I also learned that there may be a bug in data loss with the Samsung models, but I'm not sure that this is true.

    You will get different views about the FILLING. Personally, I don't use the TRIM on 3rd party SSD. I do not quite written deserve its usefulness. So, I leave the built-in SSD Garbage Collection performance of the drive. That being said, I don't know of friends who have enabled on their Samsung 850 EVO SSD of TRIM and have not experienced any problems with corruption data.

    It's yours if you want to activate the TRIM on your Samsung.

  • ThinkPad W520 - BIOS does not see mSATA SSD Samsung 850 EVO

    I bought a Samsung 850 EVO 1 TB - my W520 mSATA SSD does not see.

    This unit is compatible with the socket inside the W520 mSATA?

    And if not I can buy a controller mSATA?

    Thank you

    Everything works now - the reader was not sitting correctly

  • Pavilion DV6215us: Pavilion DV6215us and upgrade to SSD Samsung 850 EVO does not.

    Pavilion DV6215us is SSD Samsung 850 EVO compatible? I cloned the original Hitachi hard drive and everything was going well. I have installed the Samsung and porwered upwards. The answer is only pushed Esc to get to settings that meets never or boots.  Given that the new drive to adapt very well and everything seemed fine before installing it is there any reason this SSD shouldn't work?  Y at - it info on SSD drives will work with the laptop?  Thank you

    Yes the DV6000 by DV6499 series with AMD processor is not able to support an SSD. The storage controller uses a SATA interface, but it is 'false' SATA running on a legacy IDE bus. No ahci, which is necessary for the operation of the SSD. That's why we put Windows XP on them without any special driver tips during installation.

  • Upgrading the RAM. Can I use the old memory of the computer for the newly purchased computer.

    My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you

    Hello nonmae,.

    You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.

    You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • can I use 4 monito in windows 7 computer for tense office

    can I use 4 monito in windows 7 computer for tense office

    Your terms "Extended Desktop" are ambiguous, as you have not provided sufficient details with your question.

    The correct terminology is "Desktop Extension" or "Desktop covering.  It is important to note that these are two things a little different.  Fully answer your question, it is necessary to describe the differences.

    Others that by activating the special modes provided by the specific video drivers on the special cards, Windows 7 does not support Desktop covering.  The WDDM (Windows Display Driver Model) for Windows 7 does not have The Extension Office.

    The Extension Office differs from Office covering that with Extenstion Desktop games will not mode "full screen" on all screens.  Also, you will see the taskbar on only one of the monitors, and will maximize demand for only the full monitor on which it resides when you press the expand button.  However, it is possible to resize a window on multiple monitors.  Also, it hosts capabilities and monitors of different resolutions.

    Apart from the games and their preferences for the maximization of the app, Desktop Extension is very useful.

    According to me, is it possible to use The Extension Office - a collection of video equipment - extend your Windows 7 Desktop in any number of monitors, although I have only used it with two monitors myself.

    -Christmas

    P.S. on the chances that your question is about a desktop image stretching on several monitors: Yes, you can do it.  Create a desktop image that is the size, in pixels, of the horizontal and vertical of the desktop space, and select 'Tile' mode when you set the background.

  • I have a boxed version of Lightroom installed on my PC. How can I use creative cloud without having to pay for it?

    I have a boxed version of Lightroom installed on my PC. How can I use creative cloud without having to pay for it?

    Despite some similarities (current and temporary), lr 6 purchased is not equivalent to lr cc.

    But if you bought lr 6 during 30 days you can exchange it for a subscription of cc of lr: http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

    My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

    It is unlikely, unless you manage to find a way to get Lightroom 4 for free.  Adobe does not offer it.

Maybe you are looking for