Can I use SkyDrive as a USB?

Hello, I would like to know how to start to use Skydrive you... like... my player "by default". I would use "cloud" associated with SkyDrive as a flash drive which I use... to connect to the 'disc' usb port on my computer. Also, I am the answers to my questions to get an idea of the forum calendar. So please quick reply is desired.

Thank you

Good bye

SC

ASK THE QUESTION IN THE FORUMS OF SKYDRIVE:
http://windowslivehelp.com/forums.aspx?ProductID=6

Tags: Windows

Similar Questions

  • Can I use a 6343 OR USB as an entry grounded to trigger an injector?

    Hello forum members

    I'd like to be able to fire a solenoid valve high speed (low impedance about 1.6 ohm) with a peak and hold the pilot injector (from AEM).  The output of the P & H driver is activated when the trigger on input is connected to the Earth.  Can I use the 6343 to provide this ground trigger?  I read somewhere in the manual that I might be able to use a PFI or DIO line as output a 0 at the wheel.  Is that what I'm looking for?

    Thanks in advance,

    -Mike

    Mike,

    On the second page of the document, he says: trigger impedance: 220 ohms, shot at 12 V input impedance ("draw" 60 my).

    IF YOU CONNECT THIS TO A LINE OF DIO, YOU MAY DAMAGE THE USB-6343!

    What you want is a driver as the series of ULN200x of ICs.  They can handle the 12 V and 60 my. Pour reversed are available as well as high logic of the DIO line will be on the ground in the entrance to the injector driver.

    Lynn

  • Officejetpro 8610: Have router or Internet now. Officejetpro pro can be used totally with the USB on my laptop

    am away at the moment and won't have Internet connection / router. Don't think abt that when I had a wireless model. Ugh.

    She seems to have a USB port. Can I operate completely with USB and forget abt the wireless.

    of course hope

    Thank you

    Sue

    Yes, of course, you can still use the printer even without internet connection.

    You can read this article

    Download and install the printer driver and software Via USB

    Hope that helps!

  • BlackBerry smartphones can not use my bb as usb and can not copy any images or music

    Hello

    I read the post with how to use the bb with USB, I downloaded the drivers USB V5 and I still don't see my bb as a hard drive in the computer, I rebooted the pc and everything...

    Before that, I installed the office and devide manager, Device Manager see my bb but the Office Manager could not if I uninstall it and follow the way of... I'm really lost here, it's my first bb and I have no idea what to do... You will appreciate any help here.

    BTW, mine is a BB pearl 8100

    Thank you!

    Claire

    Hi and welcome to the Forums!

    Since you do not know where to go, I'll suggest to start again...

    (1) strictly regarding the RIM software uninstall from your PC:

    • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software

    (2) download a new copy of the Desktop software:

    • I suggest to use the package v5.0 without Media Manager English - which will have everything you need. Optionally, you can DL the USB drivers only, but then you will not have the full DTM application, which helps you keep your BB up-to-date as allows you to perform a backup on a regular basis.

    (3) download a new copy of your OS Package of device:

    (4) install this OS Package of device on your PC (it changes the RIM Desktop software with the stuff specific to your device on your operator)

    (5) follow these instructions to configure everything to use your BB to your PC:

    • You can jump on the download and installation of the Desktop Software market - you already have those.

    (6) with that, everything should work. If this is not the case, here are some troubleshooting tips:

    • KB02640 Troubleshooting USB connections
    • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    • KB00019 PIN code not displayed in BlackBerry Desktop Redirector

    Good luck and let us know how it goes!

  • Can I use an adapter for USB 2.0 on my 6100 SP?

    Hello
    I have a Satellite Pro 6100 and it uses the old USB 1.1 and when I plug anything modern in it it says "it can run faster." Is there any adapter that you know that I could use?

    Thank you.

    Hello

    You need something like this.

  • Can I use the El Cap USB install on MacBook Pro iMac?

    Hello everyone

    I made an installer USB for El Capitan on my iMac (Lion 10.7) and I was wondering if I can use it on my MacBook Pro (Mountain Lion) or each machine has its own setup program? When you download El Capitan is specific machine as supplied with Snow Leopard installation discs?

    1 n °

    2. it is not specific to the machine.

    (137572)

  • How can I use reverse imaq for USB video camera?

    Hello

    I'm trying "opposite" a video image live.  I try to use the "Imaq Inverse" VI and it works for photos, however, I can't it works with a camera USB which is striking images.

    I get an error "not an image" that occurs in the Imaq reverse VI when I image acquisition to enter USB plugged into the Img Src for the Inverse VI.

    Any suggestions how to get around this problem?

    I enclose two files.  The "Live video" VI allows the user to acquire video directly from a USB camera.  The VI 'Negative video Live' is the file I'm having a problem with.

    Thanks for your help!

    Hello

    I guess your camera deliver RGB images (even you initialized the 8-bit image).

    If so, try this way:

    It will be useful,

    Andrey.

  • Can I use more than one USB-6008 in the same program?

    I'm working on a project that may require up to six modules USB-6008.  Before I buy more I need to know if I can use all six at once in the same Lab View program.  Can anyone help?

    Hello Nick,

    LabVIEW is capable of handel that the number of data acquisition tasks quite easily, but you have to remember that USB has a maximum bandwidth. Therefore, you have to make sure you have enough on your PC USB hubs. In general there are between two to four USB slots by hub and each of them will have a maximum flow rate which will be divided between all devices connected to this hub. So even if you can get four USB DAQ devices attached to four USB ports if they are on the same hub, you might notice significantly reduced rates of data transfer. I would say rather than buying six or more USB 6008, why not buy a PCI card that is able to handel a lot more entries with greater bandwidth.

  • Can I use old portable portable USB Drive on the new computer

    My old, revered, laptop computer dv1240 gave the soul.  I suspect a motherboard problem, not a hard drive problem.  I have since bought a m6-1045dx laptop and I was wondering if there was anyway I could connect my old laptop computer as a USB drive to try to recover the data.  I like everyone swore I would be back up tomorrow, thank you!

    Hello:

    You should be able to use one of these... Specifications of show that your laptop is an IDE drive...

    http://www.Newegg.com/product/product.aspx?item=N82E16817182143

    Paul

  • Can I use a 16 GB USB key to create a disk recovery for a Pavillion dv6?

    It has a cover of 17.3 G * drive *, but he says that 1.9 GB of that is free, so is necessary to actually use something more than 16 GB?

    Thank you!

    HP document says 8-16 GB, with recommended 16 GB flash drive:

    http://support.HP.com/us-en/document/c01890478

  • What cable/device can I use to connect my USB only all-in-one 200xt to my HD TV?

    Is there a USB cable to HDMI that would do this?

    Tommy, welcome to the forum.

    Everything I've read, there is no way to connect your computer to your TV.

  • I bought a 32 GB USB CRUZER EDGE today. I can't use it (RAW problem)

    I bought a 32 GB USB CRUZER EDGE today. I can't use it.

    USB is in RAW format and I can't format it.

    How do I do for change in NTFS or FAT32?

    Bring (or send) back. It must be formatted in FAT32.

    But before you do, just check that the problem is with the drive itself and not your computer by trying it in another USB port and another computer.

  • can I use the same USB cable for two printers - HP Officejet 4315 and HP Officejet 6110?

    I have an existing HP Officejet 4315 with USB cable and want to use the same cable replacement for my other printers, the HP Officejet 6110.  This allows me to change the cable between the printer and still work?

    Thank you for your thoughtful replies.

    As you asked specifically about the compatibility of the USB cable, I would say that it will work because both devices support USB 2.0 (that is, both devices can be used with the same USB cable alternating).

    Installation of the software for the two devices must be made successfully to use various functions.

  • Can I use USB wireless is down?

    Can I use my power cord USB to my wireless connecting wireless printer is not available? Or I can I use only one or the other ALL the time?

    Jane

    Oh, you must add a USB version of this one.  You try to print to the wireless version and if wireless does not work, it won't work.

    -Connect the printer to your Mac with USB cable
    -Sys Prefs, Print & Fax
    -Select the sign more to add the USB version.  Look for the USB version of the printer, select it.

    -Name it something different like... USB.

    -Click Add.

  • How to use skydrive to surface

    Hello!

    SkyDrive works very well in my pc and laptop. I need an account 362 on RT. What on Earth is or how to access skydrive RT?

    Should I uninstall skydrive pro?

    • If you do not need, yes you can uninstall it.

    Can I use skydrive and skydrive pro together on one device?

    • Absolutely, they are separated.

    SkyDrive is available on Windows 8 on my pc pro?

    • Yes.

    Should I open a skydrive and an acount pro skydrive?

    • You would pay for a pro account (unless your company provides to you).  It comes as part of Office 365, so if you need a desktop software and are going to buy anyway, of course you can use.  But if you don't need this software (or already have Office), you can just use the free version of SkyDrive consumer.

    I can point both skydrive and skydrive pro in the same folder?

    • This could probably be done, but I have not tested it myself.  I point my Google Drive and SkyDrive in the same folder and that worked.

    Should I move sjydrive to sktdrive pro? Are there costs involved in this? Is the amount of space on skydrive top pro?

    • SkyDrive Pro is a completely separate thing, you cannot upgrade the free version of the consumer up to the Pro version.  See above response on opening a pro SkyDrive account.  The storage space is more Pro, but you pay for it.  You can pay for the extra space on the consumer version too (it comes with 7 GB free).

    Looks to me that you don't need Pro.  If you have problems using SkyDrive, let us know that we would be happy to help you.

Maybe you are looking for

  • No avatars bookmars

    Firefox updated itself to 9.0.6 and now, when I opened the menu bookmarks, all that I see is the list, without the typical avatars which normally accompany, as the globe orange and blue of Mozilla. How can I restore them? Going back to the old Firefo

  • HDMI monitor

    I just bought a HP p6710t computer that has only the VGA port.  My existing HP monitor is a w2207h which has the HDMI connection.  How do I connect these 2 and get good quality audio and video?  Another question: if I bought another monitor that had

  • My iphone 5s clique on random spots on screen with touch me.

    My iphone 5s clique on random spots on screen with touch me. He also sometimes I won't let me click on some letters.

  • Degradation in speed WRT610N

    IT pro with a new router WRT610N - Firmware Version: 2.00.00 B05 Connection Internet is a cable modem of 30 MB and I have connections wired two gigabit for the WRT610N and two 100 MB wired connections and multiple wireless devices.  I use WPA-2 on bo

  • Size & TextField fonts

    I use flash.text.TextField to enter & showing a large amount of text. It handles well the scroll jumps & line. How can I change the font type & size? try to get the ti to match the default value of qnx.ui.text.TextInput. Thank you