Can I use SMB connector in cRIO 9012 as an external trigger source to excite my system?

Similar Questions

• Can I use USB hubs on cRIO?

  I would use the USB port on the cRIO 2 purposes. One for connecting to a USB key and another to control a small LCD 16 x 2 display. LCD screen will be updated very rarely but will give us a lot of read/write on the USB drive. I want to know if I can do this by using a USB 2.0 hub.

  Thank you

  I personally never did this, but everything I've heard of this material makes me believe that you should have no problem with that.  Adding devices USB COM can certainly be done with latest cRIOs running Linux, not sure of the compatibility.  I've also heard of others using a USB hub with several external storage devices.  I know also that the myRIO supports hubs, I've heard some work with a hub to support a USB ethernet and USB thumbdrive USB camera to a hub, which then goes to the myRIOs a USB port.

  What is your hardware?  What cRIO do you plan on using, this USB hub if you chose and what USB LCD screen.

• Can I use Time Machine to back up to an external hard drive

  iMac mid 2011

  OS X 10.11.5

  I use Time Machine - have for a long time.  It backs up my internal hard drive on a joint external Western Digital 2 TB of hard disk, as usual.

  Can I also add that another attached an external hard drive (where I have videos and photos stored) and saved it on the first external hard drive also?

  Thank you.

  Yes

• Can I use to connect to the monitor external hdmi

  Can I use the HDMI port to connect to an external monitor while shooting video with my EOS 7 d? In addition, this monitor can be a 1920 X 1080 HD monitor? I would need to get a mini HDMI cable DVI, but want to make sure, that it would not harm the camera before trying.

  Thanks in advance!

  Hello HowardLane,

  Yes, you would certainly be able to use the EOS 7 d HDMI output to connect to an external monitor.  While a studio monitor is usually used because of their qualities of accuracy and calibration of color, any monitor with a HDMI terminal input would work.  This will not harm the camera.

• Can I use ANY XP Professional disc to reinstall the operating system on my computer. I have the thing professional XP installation sticker code on my computer, but do not have the disc that came with my computer.

  My C: drive boot sector is dead.  Now, I need to get a new drive C.  I don't have the original disc supplied with the computer.  I don't have access to an XP Professional Upgrade disk.  Can I use with the passcode on the sticker on my computer to install the operating system on a new hard drive?  If this is not the case, what should I do to get XP installed on my new hard drive.

  It is one thing for a replacement...  Thank you

  You cannot use your authentication code with a upgrade disk.

  See How to replace Microsoft software or hardware, order service packs and updates of products and replace product manuals .

• Can I use my Win 7 Pro Upgrade to upgrade my laptop running Win 7 Home?

  I bought the Windows 7 Pro upgrade before realizing that I had bought the wrong upgrade to what I had on my computer. I ended up having to buy a Win 7 Home, then update to Win 7 Ultimate, so I could keep all my programs in tact. Now, I'm about to get a laptop. If the laptop has Windows 7 Home installed, can I use my Win 7 Pro upgrade for the version of Win 7 Home upgrade? If not, what version on the laptop do I need if I can use my already purchased Win 7 Pro Upgrade? There is no other computer autour who can't use my upgrade, it seems, because I ordered the version of 64-bit operating system, so I guess that laptop must have an operating system 64-bit as well.

  Anytime Upgrade using year already bought Retail Pro/Ultimate key

  In Windows 7 Home Premium, type Anytime Upgrade in search programs and files box on the start menu, and then click the Windows Anytime Upgrade.  From there, you can enter your product key of Windows 7 Professional/ultimate retail and perform a simple upgrade. All programs and files will remain on the computer, there is no drive necessary and it takes about 10 minutes.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Upgraded version can be used to install new PCs?

  Hello. Although he fails to upgrade (why unknown - request in another thread), I bought the updated release of W7. Maybe it's hardware related.

  My query is, so if I bought a new PC (no software installed), can I use the version upgrade for a new installation on the new PC instead?

  Windows 7 Upgrade license can be used only if you have a real qualification Windows Vista or Windows XP operating system installed.  Otherwise, you will need to purchase a full license of Windows 7 version to install and activate on a blank hard drive.

  In your specific situation, consider returning your package to upgrade Windows 7 from Microsoft to get a refund, then buy a new license of Version complete, such as:

  Microsoft Windows 7 Home Premium 64-bit 1-Pack for system integrators - OEM

  or

  Microsoft Windows 7 Home Premium 32-bit 1-Pack for system integrators - OEM

  To return to your software, please visit: Microsoft North American Retail product refund Guidelines

  Carey Frisch

• What are the Causes of 'loop Hang"problem with file i/o when using timed multiple loops on one OR cRIO-9012?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  I experienced a problem with an application. I think I've isolated the problem in the "Timed loop question - Source Code.zip" attached source code. A detailed list of my results are in the attached document "Timed loop detailed question - Results.docx.

  Overview - it seems to be closely related to the IO files and the use of "Timed loops" on the OR cRIO-9012

  1. If I activate the e/s in two loops, then two loops crash simultaneously

  2. If I activate only the e/s in a loop, then only this loop crashes

  3. If I activate the e/s in two loops and make a 'While' loop earrings, then it don't crash

  4. If it is wrote nothing in the file I/o, then it don't crash

  5. If the reference to the file is left open instead of opening and closing on each call, so it don't crash

  6. If I try to run it on "My Computer", then it don't crash

  7. If the IO is only activated in a loop and programmed to wait for one second between the file access, then it always crashes

  In my real application, any given row is only writing (at least) once a minute, but I couldn't still my application to plant within a period of 24 hours by writing a single error of a single loop once per minute, with a low CPU use. It was the impulse to test the seventh point above.

  It seems that the best solution was to open the reference to the file and let it open. I think it is a good practice in general and I'll do the update in the application. This should solve the problem, but it is very difficult to verify this due to the sporadic nature of the question. As such, I'd like to understand what was causing the problem so I can verify that it was fixed. So far, my attempts to create a single, coherent theory able to explain all aspects of this issue have failed.

  I just wanted to know at all that there has been a request for corrective action (CAR #214156) has filed for this issue to be fixed in a future release. This seems to be a problem with the VxWorks operating system, we use in real time. We have additional cRIO chassis which have a Pharlap OS where it does not work. For now, you can search for this CAR ID notes to see if this problem has been resolved for publication in the future.

  Currently, there are two solutions, we have identified for this problem:

  1. open the file before the loop and close it after. (recommended)
  2 perform file i/o in a normal loop and transfer data to a queue.

• CAN 985 x and cRIO 9012

  I have a cRIO-9012 controller and chassis 9101.  I can't perform the basic examples.  My question revolves around game upward.

  Background: I have 8.6 with time real/fpga, NIRIO 3.0, NICAN2.6, as well as the 985 x software 1.3.2.  I loaded up the most recent 2008 of NIRIO3.0.0August on my RIO, however running example base reception/emission FPGAs cause time-out errors.  I added another module (9472) just to make sure I can turn some of the visible lights.  However as soon as my typing the CAN node loop this loop freezes all my lights are flashing away.

  This morning I thought that to run the example, channel CAN Receive.  I've loaded and sent the channel config in RIO.  I try to deploy the host VI and receive the following:

  Deployment RIO0 (the goal settings successfully deployed)
  Deployment ncConfigCANNet.vi
  Cannot download ncConfigCANNet.vi

  LabVIEW: Unable to load the shared library nican. *: ncConfig:C on the target RT device.

  Here's where I'm confused.  I thought that the VX works system does not support the CAN.  I see not everything CAN be supported under the NIRIO3.0.0August 2008 software, but this error of downloading indicates miss me a driver (or else...)  Someone had a similar problem, I'm missing the software on my controller?  Any suggestion is welcome.

  Thank you.

  I have found a new 9853, we received last month.  I could put in the 4 Groove and using my reception and transmit programs successfully.  I could watch the heart CAN, in addition to performing a loop of CAN1 to CAN0 test.

  The original 9853 headed on an RMA for NEITHER.  This module is apparently 1 year old.

• Can anyone confirm that a square-end 85w can be used in a 13 "MacBookPro 2012? I hate 60w L-shaped connector.

  Can anyone confirm that square-end 85w, for example as expected with MacBook Air, a connector can be used for a MacBookPro 13 "beginning 2012? I hate the 60w L-shape connector which was published with this laptop. Power cable from my previous small white MacBook had the square-end connector and it worked GREAT. The L one shape is difficult to reach, and it does NOT have quick disconnects if someone tripping over the power cord. Thank you.

  The version of Magsafe backward compatibility rather than another, is documented;

  However for the moment, I have not access to an old bookmark on this aspect.

  A problem with some MacBook Air power adapters is that they lack power for use

  with the other big power demanding models. Start/MacBookAir used power 45W.

  Examples of magsafe power adapters:

  http://eShop.MacSales.com/search/MagSafe+adapter

  Other info MagSafe:

  • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

  • Find the right adapter cord for your laptop Mac - Apple Support and sector

  I used a newer MagSafe2 with old computer equipped with MagSafe original ports.

  Don't know why, but any form adapter is needed to make it work. It's a square-edged 85w.

  Good luck in this case!

• What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions?

  What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)

  Hi jojosalud,

  According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.

  Kind regards

• Computing time on the CRIO-9012

  Hello!

  I'm actually under an algorithm on RT using CRIO-9012 with 60 MB of memory and 118 MB approx.what disk space I did it in record time is I used flat sequences. I created three frames of it and placed the resorption in window of 1st and 3rd. My middle manager code. By subtracting the amount of time between the 1st and the last frame to get how much time is taken by my algo. When I only launches on the VI created on the HOST PC, it takes approximately 14ms and if I run it on CRIO RT be close (initially deployed and then run). VX Works is also running on CRIO RT. I assumed that this time should be less time on my computer. If I continually run the VI on RT, time moves at about 1.2 sec I need to know that if I want to know how to find out the exact time taken by my algo when it is deployed on RT? If the memory is improved, it will affect the performance?

  sets says:

  Hello!

  I'm actually under an algorithm on RT using CRIO-9012 with 60 MB of memory and 118 MB approx.what disk space I did it in record time is I used flat sequences. I created three frames of it and placed the resorption in window of 1st and 3rd. My middle manager code. By subtracting the amount of time between the 1st and the last frame to get how much time is taken by my algo. When I only launches on the VI created on the HOST PC, it takes approximately 14ms and if I run it on CRIO RT be close (initially deployed and then run). VX Works is also running on CRIO RT. I assumed that this time should be less time on my computer. If I continually run the VI on RT, time moves at about 1.2 sec I need to know that if I want to know how to find out the exact time taken by my algo when it is deployed on RT? If the memory is improved, it will affect the performance?

  RT operating system such as VxWorks is not a guarantee for performance of running faster, all depends on how fast the material is! This particular device cRIO has a 400 MHz processor and 64 MB of RAM. Compare that with your host pc.

  What a RT OS gives hard limits on necessary. In other words, you can get a more predictable in your discussions parallel/process jitter, while, as in Windows, the process/thread scheduler is not deterministic.

  If someone sold you this system based on the performance and processing speed is, I return it.

  BR,

  / Roger

• cRIO-9012 regularly loses connection

  I am trying to collect and log data using a cRIO-9012, an analog input module (NI 9209) and a CAN (NI 9853) using Labview RT module.  The cRIO is connected directly to my computer with an ethernet cable.  The problem is that as the main VI is executed, it starts to slow down and finally stops after a certain number of loops.  It tends to stop at the same place every time, leading me to believe that it is a memory problem.  I'm currently no data record (see below), but I'm not sure if the values are stored on board the cRIO without my knowledge.

  Here's a screenshot of my troubleshooting VI.  It reads simply 5 analog and entries including VI falls down after about 896 loops (and it can be reproduced).

  

  I don't know if that helps, but it's the VI which is called by the target FPGA above block.

  

  You see the same behavior if you move the FPGA VI open to outside reference of your loop?

• an iPhone 5s cable charger can be used on an iPhone 4S

  I used a my iPhone 4S cable charger on someone of another iPhone 5s.  Now my charger cable does not work.  It's probably too bad?  Stores are closed tomorrow because it's a day holiday here and my phone is low in the battery.

  IPhone 5 s charger cable allows charge and iPhone 4S?

  When the shops are open on Tuesday I go to solve the problem.

  concerning

  Jake

  Your original question answered on the use of the iPhone cable.  iPhone 4S cable charger can be used on an iPhone 5 s  IPhone 5 s is a lightning cable, and iPhone 4S uses a 30 connector pins. To use for each other, an adapter must be used. While it would be rather strange that he stop work could lead to the use of the cable with other devices, everything is possible. You can make an appointment on the Apple Store to have the cable looked at, and if it is under 1 year and found damaged and not corrupted user, Apple should replace it.

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com