Can I use the drive HARD internal extra for my Satellite A200-1 to 9?

Similar Questions

• HP G62-355DX: recommend some course HP laptop model that can be used the same hard drive using G62-355DX?

  I have a HP G62-355DX dead, I think the hard drive is ok, so I want to buy a new laptop HP to change the hard drive, so I can recover my data and OS environment.

  Could someone please recommend some course HP laptop model that can be used the same hard drive as G62-355DX use?

  Even the hard drive can not put it in the bag laptop, but work with the HARD drive interface.

  Or is there any external HARD disk enclosure can be used to read the data hard disk, the data does not have compreesed.

  Thank you in advance.

  Hello! You need a new PC Yep!
  But there are other ways to do

  You can buy a SATA USB adapter that will allow you to plug in the HARD drive on another PC and the take-off data

  NOW YOU CAN ONLY SAVE DATA FROM THE DISK IF THE HARD DRIVE IS NOT DEAD

  Good luck!

  Best regards: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Currently, there is no Windows 8 driver for mobile phone Pantech Renue P6030.  However, I download pictures from a Pantech Renue by connecting the mobile phone to a computer with Windows 8.  On the phone screen a menu popped up.  I chose mass storage link that connected to the computer, File Explorer.  From there, I did some limited tasks which enabled me to copy the images on my cloud.  Not all features are on the Explorer of files to allow downloading of all the pictures, but accomplished most of the tasks I wanted to finish.

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• I can't use the microphone in my headset for Skype and recording programs

  Hello...

  I can't use my microphone in my headset for Skype and recording programs.
  Can someone pls help? I tried the camera on my phone, it works perfectly.
  I use v8.00.03 (T) Edition Premiun.

  Post edited by: worldliner

  Sorry mate but could you be more specific?

  > I use v8.00.03 (T) Edition Premiun.
  What does that mean? Toshiba BT stack or what?

  There is a new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba
  Its v8.00.12

• D recovery Partition is maximally and Red-can I extend partition on the drive HARD internal OEM?

  On my Presario CQ60 renovated, built in the recovery D: partition / disk hard internal (250GB) is appx. 12 GB but is maxed out, red color, and play with her risk of crashing the entire operating system (done).  Is there a setting I can do the d: / partition, enlarge or otherwise, in order to reduce the alarm I feel?  I have plenty of room on the c: / drive to use if it can be done, since I use a WD Passport external drive for the storage of most.  Thank you.

  See the following articles 2

  http://support.HP.com/us-en/document/c01508532

  http://support.HP.com/us-en/document/c01555992

  .

• How can I erase the drive hard so that I can sell my HP Pavillion/Windows XP/3 GB ram/512 MB hard drive?

  I need help wiping my hard drive, so I can sell my computer

  Hello

  You can use the process below to completely erase your hard drive, but you must have your game that recovery disks to reinstall the operating system if you want to sell it with XP installed.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://software.lsoft.net/KillDiskSuiteFree-Setup.exe of

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into yout laptop. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert your first HP recovery disc and restart the computer to start the installation.

  Kind regards

  DP - K

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Can I use Windows 7 Upgrade media to upgrade a Vista computer that has not been upgraded to service pack 1? Can I use the option of custom Setup for Windows 7 Upgrade media? I would go from Vista Home Premium to Windows 7 Premium.

  The computer on which I am trying to upgrade is vascular under Vista Premium, but it was never upgraded to Service Pack 1. He has a problem with PIECES that is caused by a defective ntdll.dll module and so the updates do not work. Windows Upgrade Advisor tells me I must update Vista SP1. I really don't want to spend the time to solve the problem of Vista. I would like to just do a clean install using the custom install option on the Win7 upgrade support.
  Help.

  Wrong forum. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  That being said, you can not use an upgrade to Win7 edition to make a clean installation on a computer running Vista without SP1 installed, but you can buy a complete edition of Win7 (detail) and install it after formatting your HARD drive. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can I use the local names of disk for files

  Hello

  I have 3 partitions on the disk of hard primary 465 GB where C is the system partition d & E are partitions of data I have a secondary hard drive online and think that let me use D & E as folder names, as these can appear as a Local disk icons, I have my data on will be my idea nearly worked

  I intend to use the description above if

  I can restore the data on the primary drive if it comes with empty data partitions

  I can try this experience

  As long as the names of folders does not contain the following characters, Yes, you can go ahead:

  : \ / * ? <> |

  As for names and icons, you can set the names of the files so readers define the folder icon to look like a hard disk partition. The following link will help you:

  http://Windows.Microsoft.com/en-us/Windows/folders-FAQ#1TC=Windows-7

• Choose the right hard internal storage for my Macbook Pro

  Hello

  I have amac book pro with this specification:

  Model name: MacBook Pro

  Model identifier: MacBookPro9, 1

  Processor name: Intel Core i7

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 8 GB

  Boot ROM version: MBP91.00D3.B0D

  Version of the SCM (System): 2.1f175

  Serial number (System): C0 * V35

  Material UUID: A2089733-79E3-5628-A2B7-252143B9745B

  Is it? can I change the it is a HDD with a SSD?

  < personal information under the direction of the host >

  a DSS replacement for this model would be a 2.5-inch form factor drive.

  The internal Bus is SATA-II, then don't pay do not supplement for disc SATA-III (but a SATA-III will demote and work very well).

  Build your new Mac OS on the drive in an external case or adapter and make sure it is by working together, so that you don't do too much at once and can't debug what would be issues when you start 'surgery' to install the drive...

• Can I use the car adapter More4You PX1189E-1NPO with Satellite A100?

  Hello
  I have the car more4you PX1189E-1NPO adapter and the Satellite A100-169 power supply 15V witch.
  Adapter and this laptop work together?
  (On the car adapter it is written: 'Use with all portable Toshiba up to 19V dc 6.3Amps').
  And Toshiba.eu says:
  UTES & OPTION_ID = 98981 http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=EU&action=SHOW_ATTRIB & tab = 1 #1
  "The adapter adjusts, conditions and regulates the power of entry to the correct voltage required for your notebook."
  On the Site of Toshiba Switzerland they even say it regulates to 15V.
  If I can use it with my laptop 15V, isn't?
  BR
  Phil

  Hello

  Jordan is right, he wasn't. I have the same card and the card is really just for the machines of 19V. It s easy to find, just look at the site of the compatible machines and you will be
  mention that each of these machines is a 19V machine.

  I think that that s a mistake of misunderstanding of the administrator of the site or who designed the site, then believe me, buy another, which is 15V and not to 19V.
  And Don t manual work on something that has been built and certified for this and for this machine. Believe me, this connector is already the right one for the machines according to,.
  Thus, if your machine is broken because you have modified the original equipment, then your warranty will be revocated and your machine has disappeared.

  Welcome them