Can media encoder convert a mov to WMV file?

Similar Questions

• convert MOV or WMV files in flv to play session

  Hello

  does anyone know a tool where I can convert MOV or WMV files to a flv file that can be played in an Adobe meeting?

  I tried SUPER! but when I download the file it gets converted and I see only a white screen on the pod.

  Just my settings are wrong? Must be some resolution / audio format?

  When I open it with media player classic, it can be played.

  Welcome them

  Stephan

  Hi, it IS a free solution. While you install the trial version of Flash CS5, but the media encoder is free, there is no expiration as Flash.

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Surface RT read .mov and .wmv files

  My RT Surface, largely healed a litany of problems that I posted previously, still has a problem I forgot to mention before: the native video app or app PressPlay play all my .mov and .wmv files. No problems with mp4s; they play very well.

  Is this just a limitation of Windows RT or a particular problem with my device? I recently did a clean reinstall, and the problem persists, just like before. The files in question are stored on the MicroSD card.

  Hello

  WMV 9 is supported in Windows RT.

  Take a look at the files supported on the surface from the link:

  What types of files are supported on the Surface?

• Can Media Encoder take a sequence of images in the watch folder and turn it into a video file?

  I use OSX and Media Encoder 6 (6 pm) and does not know how the spyware file take a .jpeg or .dpi sequence and turn it into a single video file.

  I tried to copy all photos in the folder of the watch, who made 60 video files individual (one for each image).

  I tried to make a subfolder in the watch folder and copy images in there... to which Media Encoder did nothing.

  What Miss me? Media Encoder will take image sequences and make out like an audio-less video for me?

  Thanks for any imput.

  Hi action_packed,

  This is the documentation: http://helpx.adobe.com/media-encoder/using/add-items-encoding-queue.html

  Still image sequences are not supported as a source through spyware records footage. If a set of still images is placed in the watched folder, each individual file will be added under a separate item in the queue rather than the entire sequence as a single piece of film.

  Make a feature request for it here: http://adobe.ly/feature_request

  Thank you

  Kevin
  

• Can hear his only, can not see the video when playing wmv files received by e-mail

  Original title: wmv files

  I receive emails with extension of wmv file, but cannot hear the sound.  I need to download and where?

   
  Hi 123lj,
   
  1. what program you use to play wmv files?
  
  If you use Windows Media Player to play the file, then try these steps and check the result.
  Step 1: Check Windows Media Player video playback settings
  a. Click Start, type of media player, and then click Windows Media Player.
  b. click the ALT on the keyboard to display Tools menu, click Options.
  c. click on the performance tab.
  d. under reading video and DVD, check if "Enable DirectX Video Acceleration for WMV files" is selected. If this is not the case, then select it.
  e. click ok to apply the changes.
  f. close media player and check the result.
   
  Step 2: Check the updates of Windows to see if there is an update available for your video card
  a. see question ' "what types of updates can Windows install automatically?".
  b. follow the instructions to install the update of the driver.
   
  Step 3: If your driver software update does not resolve the problem, try to reduce (or turn off) video hardware acceleration by following these steps.
  a. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
   
  See Read an audio or video file: frequently asked questions
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player plays is not the wmv files

  I installed a new version of AMD Catalyst Software Suite V 12.2.00 08/03/11 and immediately pinned the problem of not being able to run the MWV Media Player files.  The media player will turn green and the audio works well.  I guess that my old (2008) Dell Studio 540 Intel Core Quad 2.66 Hz machine is too slow for all graphical applications included in the CCC again.  I uninstalled the entire update and installed the driver more AMD V 8.950.0.0.  Rebooted and tried to execute a file on Media Player WMV.  The same problem.  I went back to a restore point, until the day before the installation of the new version of the Suite software Catalyst.  Then I rolled back to the previous driver V 8.920.0.0.  Does not solve the problem.

  I finally ended up at this place where someone posted the same problem.  I went if the three methods that have been listed.
  Method 1: Go to the Play-year-audio or video file FAQ
  Result: Nothing useful there.

  Method 2: Re-save the file and check, it is that it works.
  Result: Panel received
  DllRegisterServer in successful wmvdecod.dll OK

  Method 3: Change screen Resolution.  My procedure was different from that used by anyone trying to help the first user.  I'm running Windows Vista 64 - bit SP2.  I had to go through the display settings, advanced settings.  Click on change settings and I received the message: your current display driver does not allow changes need to be made to hardware acceleration settings.  I then clicked on the Troubleshooting tab and received the following panel;  Catalyst Control Center cannot be started.  Currently, there are no settings that can be configured using Catalyst Control Center.     No big surprise that I had uninstalled the CCC.  Should I reinstall again?

  Having listed all the codecs on my machine, I have no idea what to do with them.  The only one that seems to apply is WMVideo Decoder DMO.

  My profile is:
  Dell Studio 540 Intel Core Quad 9400 Hz 2.66 6 GB memory
  Vist Windows 64 - bit SP2
  Dell E207WFR ATI Radeon HD 3400 Series
  Driver AMD V 8.920.0.0
  Windows Media Player V 11.0.6002.18311

  Hello

  (1) is there an error message or an error code during playback of .wmv files?

  I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow method 1 to disable audio enhancements.

  Method 1:

  a. Open Sound by clicking on the Start button, and then clicking Control Panel.

  (b) in the search box, type sound, and then click sound.

  c. on the playback tab, click speakers and then click Properties.

  d. click the enhancements tab, and then select turn off check all sound effects box.

  Method 2: Uninstall and reinstall Windows Media Player with Windows features enable or disable:
  Step 1.
  Uninstalling Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and uncheck the brand in the face of Windows Media Player.
  (d) restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and place a check mark in front of the Windows Media Player.
  (d) restart the computer.

• Windows media player does not open the wmv files and when I go to turn on or off windows feartues windows media player is not displayed in multimedia features

  Windows Media Player is not in the multimedia functions to scroll to the bottom of the pop-up window

  Hi WilliamHendry,

  1. did you of recent changes on the computer?

  2. you receive an error message during playback of WMV files?

  3. are you able to play other file format music files using Windows media player?

  In Windows vista, you will not find Windows media player available in the list of Windows features.

  Check and make sure that your computer has all the necessary codecs installed.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

• Windows Media Player 7 won't play wmv file.

  I downloaded a record of a conference I went to (so I trust the source). The file is a .wmv file. When I try and play in Windows Media Player (version 12 for windows 7) I get this error message:

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.
  I tried a solution I found here on the resolution of the WMP settings through the windows and that has not worked.
  I'm looking for help fixing WMP or find another player who will play .wmv files (I currently have a Divx on my computer).

  I downloaded a record of a conference I went to (so I trust the source). The file is a .wmv file. When I try and play in Windows Media Player (version 12 for windows 7) I get this error message:

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  I tried a solution I found here on the resolution of the WMP settings through the windows and that has not worked.

  I'm looking for help fixing WMP or find another player who will play .wmv files (I currently have a Divx on my computer).

  =============================
  Have you tried the DivX Media Player?

  Media Player freeware at the following address may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://www.videohelp.com/tools/Media-Player-Classic-home-cinema
  (works on XP/Vista/7)  (The name of the file to download is:)
  "mplayerc_homecinema.1.6.4.6052.x86.exe).
  (start with left click - Download (direct link)

• Media Player does not open the .wmv files

  I have a laptop HP with Windows 7 software.  My Media Player not open .wmv files.  I tried Microsoft FixIt tne failed.  What should I try next?

  You have created another user account to verify the issue? Follow the instructions here: -.
  Create a user account

  Or, try the following utility: -.
  Repair Windows Media Player with Fix WMP Utility
  Download and run the utility. All the instructions are given above (in the link).

• Why can't I convert my FAT32 to NTFS file system in Win XP SP3?

  I want to move to Vista and Windows 7.  When I ran the upgrade for Vista, I was told that I had to do a clean install and upgrade option has been disabled due to the FAT 32 from my hard drive file system.  I can't wipe my drive because I have a bunch of stuff and I don't have the storage means to do so.

  I followed the instructions on how to convert without data loss, but when I arrived at the command line and entered ' convert c: / fs:ntsf "I got a message that the drive had to be dismantled and that it translated when I rebooted.  So I've done that and restarted.  The blue screen came and began to convert.  Then there were a bunch of error messages regarding bad sectors or bad files and that it could not be converted.

  I then ran chkdsk and chkdsk /f.  The first chkdsk says that there are errors, but they would not fixed because I didn't run with the extension/f.  So I did this and then said that he had to do a restart.  So I restarted and the chkdsk took forever.  When I got back to my office, I ran the line convert again and now I get something along the line of FAT32 and NTFS conversion are not available.

  So in addition to abandon and wipe my drive, how can I fix my drive?  Of course, chkdsk /f has not helped and not more than chkdsk/r.  I tried the magic of partition, acronis, and anything else I can get my hands.

  What should I do now?

  Hi sweetp267,

  Try these steps and check the result.
  a. connect to the admin user account.
  b. Click Start, run, type cmd and click ok.
  (c) in the command prompt, type the following command and press ENTER: CONVERT C:/FS: NTFS /V
  d. check the difference.

  The /V will verbose mode and can give more information, if it fails. A restart will be required because the drive is currently in use by the operating system.

  See How to convert a volume to FAT32 to NTFS in Windows XP file system

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop people from copying my wmv files but still leave access/view the file?

  and then I sell my files wmv on CD/dvd-if I do this do I have to pay Microsoft a fee/charge?

  Hello

  I suggest you to ask your question in the MSDN forums.

  You can follow the link below to ask your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• I can't open a live Movie Maker project file.

  I tried to download it on SkyDrive. I clicked on add files and select the computer, but the project file will not always be open. How can I access the project folder for the movie I was doing?

  PAM Ebert

  I tried to download it on SkyDrive. I clicked on add files and select the computer, but the project file will not always be open. How can I access the project folder for the movie I was doing?

  PAM Ebert

  =============================================
  Please provide more details...

  If you try to reopen the WLMP file for editing and it won't
  Open... it is maybe damaged... consult the following links for information:

  How can I fix a project file that does not open in Movie Maker?
  http://Windows.Microsoft.com/en-za/Windows-Live/Movie-Maker-fix-project-file

  How to recover a file corrupted maker?
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-program/how-to-recover-a-corrupt-Movie-Maker-file/996b4557-44DA-49FB-A899-c340a0ea4584

• How to make a dvd with an audio track after export using the media encoder? I have 2 separate files?

  Hello

  I just burn a video that I have completed. It's a m2v file and so I have a point of view audio AC3 and a video track. I thought I was ready to go, but I can't understand how to burn audio and video on the same disk. It's very embarrassing because the settings I should use for export to keep video quality will give me 2 separate files.

  So, what programs you use or recommend I would like to add an audio track? I don't want people to have the ability to switch between tracks, I just want a normal life trace that you have when you watch a movie, I mean he's playing just by default.

  Thanks to the adv.

  Mark

  Again is Adobe for DVD software, although there are others.  In General, the export of the elementary streams for use in an authoring application is the preferred method, then you are doing things.

  Specific help again, I would do you for the help file again.  If you decide to use another application, its own set of instructions will guide you.

• .wmv cut in half horizontally inside Premiere Pro, AE, Media Encoder...

  Hi all! I'm having a problem with the help. WMV in AE, Premiere Pro and Media Encoder. Whenever I open the picture in a sequence or the source window, the image is cut in half horizontally (see photo below). I brought in a MP4 and had no problem so for now, I think I've narrowed to strictly a. Problem WMV. The file plays perfectly fine in real time; sounds great, photo (from what I can see) seems good; Miss me just the top of half of all hehe to WMV file. I tried the WMV inside AE as well but that you have the same problem. I also tried to export WMV with Media Encoder but it exports the WMV cut in half any format I said the file conversion to...

  My Premiere Pro, AE and Media Encoder are perfectly up-to-date; My 660 it from Nvidia is up-to-date; I just installed latest Windows 7 codec package; Just installed Windows 7 x 64 new updates.

  Also, it is a great note... It is the first time I used the first Pro/AE/Media Encoder on this system. I just built this PC about 1 month ago and have had 0 problems with it other programs (Photoshop, 3ds max, etc...) I recently installed first, AE, Media Encoder on it and am running on this problem on my first start of first/AE/Media Encoder.

  My system specs are displayed below the photo and file specs.

  The photo below shows my configuration and the question that I have. Finding Nemo video on the left is the. MP4 (file specifications are below) and the video on the right is the. WMV in question (also sheet below).

  

  I tried several different bitrates WMV, etc., and each of them do this 'cut in half thing..' No problem with other types of files well!

  The. WMV is...

  Type: Windows Media

  File size: 8.5 MB

  Image size: 1920 x 1080

  Frame rate: 29.97

  Audio Format: 44100 Hz - 16-bit - stereo

  Project Audio Format: 44100 Hz - 32 bit floating point - stereo

  Total duration: 00; 00; 00 14

  Pixel format: 1.0

  The. Specifications of the MP4 are...

  Type: MPEG Movie

  File size: 1.4 GB

  Image size: 1920 x 1080

  Frame rate: 23.976

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 01:40:47:21

  Pixel format: 1.0

  Created by: Adobe After Effects (Windows) CS6

  My system specs are below.

  ------------------

  Information System

  ------------------

  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318) - 1533

  Language: English (regional setting: English)

  System manufacturer: ASUS

  System model: all series

  BIOS: BIOS Date: 19/04/13 17:27:15 worm: 08.01

  Processor: Intel Core i7 - 4770K CPU @ 3.50 GHz (8 CPUs), ~3.5GHz

  RAM: 32768MB RAM

  Available OS memory: 32706MB RAM

  Page file: 8393MB used, 57018 MB of available space

  Windows Dir: C:\Windows

  DirectX version: DirectX 11

  DX setup parameters: not found

  DPI setting: Using System DPI

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  If I think of any information that may help narrow this question, I will surely post it! Thanks for your help everyone.

  -Mitch

  Win Update breaks WMV http://forums.adobe.com/thread/1252244