can microsoft Systems Center essentials monitoring VMware Vms

Similar Questions

• How can Microsoft System Sweeper definition updates, I get them?

  How can I get Microsoft System Sweeper definition updates? The URL it gives for this does not work. (http://go.microsoft.com/fwtask/?LinkID=96776)

  Microsoft System Sweeper belongs to Microsoft DaRT, information about the updated definitions are displayed here:

  http://TechNet.Microsoft.com/en-us/library/ee460911.aspx

• Microsoft System Center Operations Manager Pack for vmware view?

  According to the link below, there is a vmware view management pack available for MS operations manager:

  http://blogs.VMware.com/view-point/2010/08/view-45-modernizing-the-Windows-desktop.html

  Where can I download this? I was not able to find it in the download portal.

  This package is actually available on the login server view itself once you have it installed.

  Information on integration with SCOM is found beginning on page 51 of the Guide found here VMware View integration:

  http://www.VMware.com/PDF/view45_integration_guide.PDF

  -Mike

• AcroPDF.dll being disabled by Microsoft System Center Endpoint Protection

  With the help of:
  Adobe Reader 11.0.10

  IE 11 (with 'Run anti-malware software ActiveX controls' enabled for the area)

  The Microsoft Antimalware component of PEIE IOfficeAntiVirus seems to be blocking the viewer Adobe Reader ActiveX (AcroPDF.dll) by adding the key "HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\ {CA8A9780-280 D-11CF-A24D-444 553540000" to mark as being dangerous.

  Adobe is aware of this and they are from Microsoft? If not, someone can do it please?

  Paul.

  Hello

  This issue has already been reported as a bug & we hope to get it fixed in the January update.

  Kind regards
  Nicos

• Event ID 1530 in a System Center environment

  Hello

  On a Windows Server 2008 R2 with System Center installed, we have the following warnings:

  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register User 15 handles is escaped from \Registry\User\S-1-5-21-1715555822-179605362-839522115-8025:
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\trust key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\My key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\CA key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Control Panel\International key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\Root key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\SmartCardRoot key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\Windows\CurrentVersion\Explorer key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Policies\Microsoft\SystemCertificates key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\TrustedPeople key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\Disallowed key

  The user S-1-5-21-1715555822-179605362-839522115-8025 is the user workflow.

  We have a workflow (written in c#), which runs a powershell script. This sometimes results in the following error:

  System.NullReferenceException: Object Reference not set to an instance of an object.
  at System.Environment.GetEnvironmentVariable (String variable, target EnvironmentVariableTarget)
  at System.Management.Automation.ModuleIntrinsics.GetExpandedEnvironmentVariable (String name, target EnvironmentVariableTarget)
  at System.Management.Automation.ModuleIntrinsics.SetModulePath)
  at System.Management.Automation.ExecutionContext.InitializeCommon (AutomationEngine, PSHost hostInterface engine)
  to System.Management.Automation.AutomationEngine... ctor (PSHost hostInterface, RunspaceConfiguration runspaceConfiguration, InitialSessionState iss)
  at System.Management.Automation.Runspaces.LocalRunspace.DoOpenHelper)
  at System.Management.Automation.Runspaces.RunspaceBase.CoreOpen (Boolean syncCall)

  I think that both the warning and exception, are related. But I don't know what the problem is.

  Can someone help, please?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• P2V - System Center Virtual Machine Manager 2008 R2

  I am running Microsoft System Center Virtual Machine Manager 2008 R2 on a Windows Server 2008 R2 with SP1 enviornment.

  I am creating a P2V Conversion in the P2V Assistant and 'Conversion of information' section, I get the following error message:

  Error (3210):

  And\pr boot volume system \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\ was not selected or is not found on the

  source machine >.

  Recommended action:

  Selected machine > cannot be virtualized. Verify that the system volumes and boot are selected for migration. So try

  try the operation again.

  Environmental information:

  Source server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Domain Services Active Directory, DNS, DHCP, printing and service of documents, files, & network policy and Access Services
  • Discs: C:\(OS) & D:\(File Share)

  Destination server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Files, Hyper-V services (IIS) Web server
  • Discs: C:\(OS) & D:\(VHD Files)

  Information about the conversion:

  • Configuration of the volume: (selected Volumes-C:------, D:\ & disk: Partition 0: 0)
  • "Offline conversion" because of the following warning: disk hardware or the file system on the volume \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\: is not supported by Volume Shadow Copy Service.

  I don't know what the problem or prevent this from happening. Assistance in this matter is greatly appreciated. Thank you.

  Hi Christophe,

  According to the description looks like you have a problem with a particular program in Windows server 2008, I suggest you post this question in this forum for further assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps. If you have questions about Windows do not hesitate to answer and we will be happy to help.

• I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files to help!

  I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!

  Hi Shawnmehringer,

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1. have you installed Microsoft Fixit Center on your system?

  2 are. what codec fix you referring?

  3. which files are disabled and you try to activate again?

  If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.

  Microsoft Fix it Center Forums

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• I can't install the SP3 from Microsoft Update Center

  I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  jneen420

  Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

  I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

  Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

  Follow the instructions below:

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

  [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

  Wish I had better news for you, Jeannine. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I remove Microsoft Download center of my office, I downloaded the malware removal tool and do not want to

  How can I remove Microsoft Download center of my office, I downloaded the malware removal tool and do not want to

  Have you checked in Add/Remove programs? --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I installed Windows sidebar gadget for microsoft fix Center solutions - but he said: NO DATA FOUND whatever that means and how can I solve this problem?

  How can I fix the problem of NO DATA FOUND on my sidebar gadget for microsoft solutions Center?

  Hello

  ·         Where did you installed gadget from?

  ·         What is the name of the gadget?

  ·         Do you have an internet connection on the computer?

  ·         Which site did you download the gadget from?

  Response with above information to better help you.

• Why can not download from Microsoft Download Center?

  I have tried 3 days to download .NET Framework 4 (standalone) from the microsoft Download Center, but I can't.

  Also tried downloading something similar and still the same problem.
  What is the problem with that?
  Why all the downloads from Microsoft Download Center does not work?

  Hello

  ·         What web browser do you use to download .net framework 4?

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  I suggest to start the computer in Safe Mode with network and check if you can download .net Framework 4.0.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

   

  Method 2:

   

  If you use Internet explorer, you can try optimize Internet explore for better performance and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Method 3:

  Also, follow the steps in troubleshooting this article and check if that helps.

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/KB976982

• How can I repair my Microsoft Fixit Center?

  My Microsoft Fixit Center does not work and the 803C 0107 error code was cited. How can I fix this?

  Hello David,.

  1. what exactly is the problem with your computer?

  2. why run Microsoft fixit?

  3. what Microsoft fixit did you run?

  4 did you change on your computer before the show?

  If you have issues running Microsoft fixit, the right place to contact you would be supported from Microsoft fixit solution Center.

  I suggest you to report the problem in the following link to get resolutions for problems with Microsoft fixit.

  http://social.Microsoft.com/forums/en-us/newThread?category=msftsupporttools&Forum=fixitcenter

• Can EE hyperic or open source windows file systems mounted remote monitor?

  Can EE hyperic or open source windows file systems mounted remote monitor? actions
  
  I have a server windows Hyperic Enterprise Version 3.0.3 and if I click on the dashboard, the Assembly resource file server, I see it as a green ball, local NTFS file systems, but the remote file systems have a gray ball. I see this on the server as well as on the windows client EA servers.
  If I try to conifure the disk, he says it is NOT installed or not configured correctly.  Since
  client and server hyperic windows run as root, I thought I could have access to the entire disk.
  Can monitor hyperic actions or remote windows file systems?  Maybe it's the account that installed the hyperic has a server share file system remote z:\, but my root account
  I use to access the EE hyperic server does not work?

  When you install the Windows agent as a service, it begins in place and works using the default SYSTEM account. This account has full administrative rights to monitor most of the things on the local computer, but will not be able to connect to remote shares on the network. The account used to install the software has no impact at this stage. In addition, the agent, not by the server permissions, are what effect the possibility of access to the remote network share.

  If you want to monitor your network shares using the agent on this box and not on the server that actually hosts the network share, you can change the agent service through the Services Control Panel:

  1. go to start-> Control Panel-> administration-> Services tools

  2. find the "HQ Agent" service and double-click (or right-click and select properties)

  3. on the connection tab, select it "this account:" radio button, and then enter a valid network user account information, as well as his password

  4. click on apply or OK to apply the change takes effect

  5 restart the service "Agent HQ"

  Keep in mind, no matter what you are using an account must have permissions to gather information of the local area, as well as the permission to connect to the remote network share.

• I can not turn on microsoft Security Center as it wont let me could you help please

  I would like help in the marketing of microsoft Security Center, because it won't let me turn it on and my computer is not protected I don't know why he used I barely noticed the problem and would appreciate any help to rectify the problem.

  How to enable Windows Security Center...

  Start button > in the search box, type Services> press the Enter key > scroll down to find the Security Center, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic (d...
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select Automatic (delayed start)
  the service status, click start
  Click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• System Center r2 2012

  I work in a school and I can see through our volume license console we have System Center configuration manager 2012 r2 in there. Are we able to obtain the System Center service manager r2? how much is it to add to our licenses.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum