Can not activate wireless after Windows vista install driver problem?

Similar Questions

• can not activate iPad after extinction

  can not activate iPad after extinction

  The iPad battery is not empty? If this isn't the case, then have you tried a soft-reset/reboot to see if that gets it to start? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.

• Can not activate WiFi on Windows 8 - 3372-2VU X131e

  I did a clean Windows 8 Pro install, because I didn't want any-bloatware. And now I can't, for the life of me, turn on the WiFi. The combination of function (Fn + F5) to turn on keys does not work, so I just can't activate it via the OS.

  I tried to install these drivers (all support them my model):

  1. Hotkey features integration: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gevu44ww.exe
  2. ThinkPad Wireless LAN driver: http://support.lenovo.com/en_AE/downloads/default.page?selector=expand

  Any help would be greatly appreciated. Thanks in advance!

  
  

• can not find platform for windows vista update

  my computer does not find the platform for windows vista update and I can't find anywhere to download from. Help! is there anywhere I can download that has not removed?

  Only-how to get updates of platform for Windows Server 2008 and Windows Vista Windows Update the platform update for Windows Server 2008 and for Windows Vista platform update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start, click all programsand then clickWindows Update.
  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  To get the updates recommended for your computer and important, underRecommended updates, select the include updates in downloading, installing, or informs me of the box put up-to-date recommended.

  You check parameters WU to ensure that you get a list of bottlenecks and recommended.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I can not load silverlight on windows vista 32-bit, IE9, suggestions?

  I want to use Silverlight on my hotmail in Windows Vista.  I get a reference whenever I want to download a document or a picture.  I go through the process of the downloand and get the message "cannot install silverlight.  What's up with that?

  Hi, Gigi r,.

  Is there any previous installations of Silverlight?

  You could try uninstalling Windows Update/installees updates

  Try installing from a clean boot:

  1. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  1. On the general tab, click Selective startup.
  2. Under Selective startup, clear the check box load startup items.
  3. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  4. Click OK.
  5. When you are prompted, click on restart.
  6. After the computer starts, start the download and see if the problem is resolved.

  If the problem does not reappear when your computer is in clean boot mode, a background program probably causes interference.

  To restore your computer to a Normal startup mode, follow these steps.

  1. Click Start in the box start the search.
  2. Type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  1. Click the general tab.
  2. Click Normal Startup - load all device drivers and services and then click OK.
  3. When you are prompted, click on restart to restart the computer.

• Can I activate a clean Windows 7 install when I had originally a HP of Windows 7 installation?

  I have a HP Pavilion Elite comes with Windows 7 Home Premium 64 - bit installed.  I recently bought a 120 GB SSD and wanted to install the programs on the SSD and Windows 7 and use the old 1 TB of HARD drive for storage.  Rather than clone my old HARD drive I decided to try a clean install of Windows 7 on the SSD.  When I tried to do it via the recovery DVD I had done, I received an error message indicating that I could not do a Windows 7 recovery facility because the disc was smaller that the Windows drive has been installed originally on.  To work around this problem, I downloaded an ISO of Windows 7 Home Premium 64 - bit official and he has engraved on a DVD.  Then I used Magical Jelly Bean Keyfinder to find my original Windows 7 key and proceeded to do a clean install of Windows 7 on my SSD.  When it came time to enter my product key, my key is not accepted.  I have Windows 7 Home Premium 64 - bit installed on my SSD but I can't activate it and I am short on time.  I would be able to activate Windows 7 with key of my install original HP or I'm done here?  Is it possible that I can use the recovery of my original Windows 7 installation DVD to install it on my SSD and avoid this problem?  Thanks for any advice.

  Have you tried to activate using the key on your COA sticker?

• Can not activate changes after activation HTTP Tunneling

  Hi Techies,
  
  I'm stuck with OOM while activating the changes after activate us HTTP Tunneling on our PROD environment. using the administration console. Tried to do through WLST aswell but without success. It worked fine on UAT. I wonder why it is not on the PROD. I copy the stack for your reference. Any suggestions on this?
  
  
  # < 26 April 2012 0:01:51 EDT > < error > < Console > < machine01 > < AdminServer > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < wlsadmin > <><>< 1335412911650 > < BEA-240003 > < Console met the following error weblogic.management.provider.UpdateException: [management: 141191] the phase of preparation of the configuration update failed with an exception :
  at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateDeploymentContext(RuntimeAccessDeploymentReceiverService.java:652)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doUpdateDeploymentContextCallback(DeploymentReceiverCallbackDeliverer.java:133)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.updateDeploymentContext(DeploymentReceiverCallbackDeliverer.java:27)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.callDeploymentReceivers(ReceivedPrepare.java:203)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.handlePrepare(ReceivedPrepare.java:112)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.receivedPrepare(ReceivedPrepare.java:52)
  at weblogic.deploy.service.internal.targetserver.TargetRequestImpl.run(TargetRequestImpl.java:211)
  to weblogic.deploy.service.internal.transport.CommonMessageReceiver$ 1.run(CommonMessageReceiver.java:410)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  Caused by: means: allocLargeObjectOrArray - size of the object: 2106432, elements of Num: 2106409
  
  at java.util.jar.JarFile.getBytes(JarFile.java:358)
  at java.util.jar.JarFile.initializeVerifier(JarFile.java:317)
  at java.util.jar.JarFile.getInputStream(JarFile.java:386)
  to sun.misc.URLClassPath$ JarLoader$ 2.getInputStream(URLClassPath.java:689)
  at sun.misc.Resource.cachedInputStream(Resource.java:59)
  at sun.misc.Resource.getByteBuffer(Resource.java:155)

  If the OOM error occurs when you deploy for the first time, so we cannot really do much here rather than the two options below:
  1. If it's a great app, then split the application into multiple parts if this is possible, if the application has several modules.
  2 increase the bunch of 1.7 GB and hope that the slight increase will solve the problem.

  If the error occurs after several OOM earthwards, there is a possibility that you hit a bug.
  There are a few bugs of redeployment in WLS10.0. You can request a fix via a request for service support (SR)
  Once again remember that these are bugs related to redeployment only.

  Arun

• Can not activate the restore Windows Pro CD to reinstall

  I'm trying to fix a friends computer. It's an Enpower AMD Athlon 64 3200 + 2.01 GHZ, 1 GB RAM, Windows OEM Pro. The hard drive crashed, and they lost all their data. I replaced the HARD drive and am now in the process of re - install the restore CD of Win Pro comes with the computer. Unfortunately, the key ProductID (OCA) outside of the case has partially torn. How can I return this product key?

  I searched through these forums and found a key in the UNATTEND file. File TXT on the CD, but it won't accept it. I also tried suggestion of forums in order to preserve the OEM key and failed also, are there other options to get this key without having to purchase another license?

  I'm afraid you're out of luck.  If the torn label had been noticed before the HD crashed, the existing product key could have been found using a program like Belarc Advisor or the Magical Jelly Bean Keyfinder.  However, with the death of HD, it is too late for that now.

• I can not print from laptop windows vista dell 966 printer and network 7wireless.

  I have updated drivers etc. When you see through the wizard to connect to the printer OK. But it not connecting ", explains research of day then lookking for driver update in windows update etc. Any ideas?

  Ted,

  Try to read...

  File sharing and print in Vista (thanks to mombodog)

  and

  Share files and printers between Windows 7 and XP

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• When I try to open pps files, I create an association in the control panel of binding together. It drives me crazy I have a hundred emails that I can not open I have windows vista.__yorkytaylor

  Control Panel of the value binding

  http://ask-Leo.com/where_did_file_associations_go_in_windows_vista.html

  Link above shows you how to set the file Association in Vista.

  You also need PowerPoint, which is part of Microsoft Office, installed on your computer to read .pps files.

  Here is a workaround:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048DC840-14E1-467D-8DCA-19D2A8FD7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  Overview

  PowerPoint Viewer 2007 lets you view presentations created in PowerPoint 97 and later versions features. This viewer also supports opening presentations from Microsoft PowerPoint, protected by password. You can view and print presentations, but you cannot edit them in the PowerPoint 2007 Viewer.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot restore the system and can not get online with Windows Vista

  Original title: bought a hp with vista system has never worked right

  This system came without a disc I way to restore the system never worked, restore now int exp problems was trying to correct but are unable to online this vista system has no access to anything else. I would like to get a look of MS and correction online, but my system will not let me access MS

  Check with your computer manufacturer on how to restore your system correctly and if there is a problem, the manufacturer should be able to help.

  Maybe this will help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334

• Can not activate cc after payment

  Help, please

  Hello

  I see that your creative cloud account shows expired.

  Contact Adobe customer service for repair.

  Contact the customer service

• Can not activate VT with windows XP 64-bit host, Ubuntu 32 bit Gueast, intel i7 CPU

  I'm trying to enable hardware virtualization support and I get the message error "hardware virtualization is disabled in BIOS/firmware of the host.

  I downloaded the vt.iso. When hardware virtualization support is enabled in the bios, it reports that:

  CPU 0: MSR feature control is unlocked!

  ...

  UC 7: MSR feature control is unlocked!

  When I disable from bios hardware virtualization support, I get

  CPU X: VT is disabled in the control of the MSR function!

  I have the card mother Gigabyte GA-EX58-DS4.

  Version of VMware 6.5.1 build-126130

  I am naïve.

  You have a link for this document?

  See my first response

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Can not activate a genuine Vista upgrade online.

  How is it, I can't activate my Microsoft Windows Vista Home Premium SP 1 Upgrade key online, where the product is authentic? He was once before on the same computer, but then for some reason, I had to reinstall all this on the basis of Windows XP OEM of experiences which is as authentic and had no problem with activation. The network works perfectly well, and just at the moment where I want to activate it, it is said that the key I typed in is already in use. Please help, got only 3 days until what it stops.

  Hello

  "It was installed once before on the same computer"

  initial activation is still in effect

  That's why I said take the real person option