Can not activate WiFi on Windows 8 - 3372-2VU X131e

Similar Questions

• Can not activate WIFI on Satellite P200-1FY

  Hello =)

  First of all, I apologize for my bad English, I will do my best to be understandable!
  So, I got a problem with my satellite P200-1FY: I can not activate the WI - FI card. I have try the combination of keys (fn + F8), and it does not work. I check the center of mobility of Vista in the Control Panel, it says that WIFI is not activated, but [I can't click on the button to activate it. | http://anonlinepieceofmymind.com/blog/images/wifi.jpg]
  I have the latest version of the driver for the wireless card, so I can't understand why it won't work. (but maybe just because I'm just a total beginner ^_^')

  Thank you for your time and help,
  Edward.

  Have you turned on the switch on the side of laptops?
  I put t know not which way the switch is present, but check it must be somewhere on the side.
  This switch must be turned on everything first, then you can use the FN + F8 key combination.

• NB - FN keys does not work so I can't activate WiFi on Windows 7

  I can not turn on because wireless FN + F8 does not work on Windows 7. Could someone help me solve this problem?

  Is it possible to remove Windows 7 and reinstall Windows XP again? (I formatted the C drive before installing Windows 7) Now, I don't know how to remove Windows 7 and reinstall Windows xp.

  I thank very you much for your help in advance.

  I think that if you formatted the entire score, you need to call tech support to a recovery DVD, to the United States, we are charged $ 24.95... If you don't remove the hidden partition, you can start recovery at startup option.

  HTH,

  Jeff

• can not activate Wifi on acer aspire v5 - 573 g

  WiFi won't turn on my pc win 8.1. The possibility to activate the wifi is faded. Device Manager displays the device works perfectly. The driver is "WLAN_Atheros_10.0.0.263_Win8.1x64". I reinstalled the driver. Don't know what to do more.

  Any help would be appreciated. Thanks in advance.

  We recommend to check first if the button on your Acer Aspire V5 - 573G or wireless switch is turned on (if you haven't checked it out already) so that the aircraft is allowed to connect to wireless networks. Usually, Acer laptops and netbooks, wireless or key switch is placed in one of the following ways:
  1. a dedicated button located above the keyboard.
  2. a toggle switch, located on the front or the side of the unit.
  3. the FN and the key with the icon wireless on your keyboard. Usually, the combination of keys "Fn + F3" (without the quotation marks) is used.

  The key can be identified by looking for a wireless connection icon. For more information, you can consult the support page on Acer at the following address:
  http://Acer.custhelp.com/app/answers/detail/A_ID/1304

  If you are still not able to identify the Wi - Fi or key switch, you may need to consult the user manual of your device for details. In this case, your wireless connection switch is already selected, but you are still not able to connect to the wireless network, you can consult the following Acer support page for some options more troubleshooting:
  http://Acer.custhelp.com/app/answers/detail/A_ID/32747

• Can not activate wireless after Windows vista install driver problem?

  Hi all

  Don't know if this is the right place for the post, if not I apologize in advance.

  I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I have brought a new and installed Windows Vista disc premium edition (not a backup / recovery disc).

  Everything seems fine but I can't turn on the wireless, the C700 has a button at the top wireless rough (which has a red LED when not away) to the left side. Normally impose you it, and it lights up (turns blue LED) but nothing!

  I have commented on Wi-wired and update windows etc and have tired to find wireless driver I guess that I'm missing? You are not sure if it's wireless missing driver or a keyboard driver?

  After installing a few drivers I found where time no joy!

  Can anyone help?

  See you soon

  P

  You are the very welcome.

  This driver below should set you straight up.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Best regards

  Paul

• Can not activate the restore Windows Pro CD to reinstall

  I'm trying to fix a friends computer. It's an Enpower AMD Athlon 64 3200 + 2.01 GHZ, 1 GB RAM, Windows OEM Pro. The hard drive crashed, and they lost all their data. I replaced the HARD drive and am now in the process of re - install the restore CD of Win Pro comes with the computer. Unfortunately, the key ProductID (OCA) outside of the case has partially torn. How can I return this product key?

  I searched through these forums and found a key in the UNATTEND file. File TXT on the CD, but it won't accept it. I also tried suggestion of forums in order to preserve the OEM key and failed also, are there other options to get this key without having to purchase another license?

  I'm afraid you're out of luck.  If the torn label had been noticed before the HD crashed, the existing product key could have been found using a program like Belarc Advisor or the Magical Jelly Bean Keyfinder.  However, with the death of HD, it is too late for that now.

• Can not activate VT with windows XP 64-bit host, Ubuntu 32 bit Gueast, intel i7 CPU

  I'm trying to enable hardware virtualization support and I get the message error "hardware virtualization is disabled in BIOS/firmware of the host.

  I downloaded the vt.iso. When hardware virtualization support is enabled in the bios, it reports that:

  CPU 0: MSR feature control is unlocked!

  ...

  UC 7: MSR feature control is unlocked!

  When I disable from bios hardware virtualization support, I get

  CPU X: VT is disabled in the control of the MSR function!

  I have the card mother Gigabyte GA-EX58-DS4.

  Version of VMware 6.5.1 build-126130

  I am naïve.

  You have a link for this document?

  See my first response

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• NB305-N410BN-G = FN + F8 can not activate 3G / but FN + F8 can activate WIFI

  Hello world

  You also have a problem with the switch of Toshiba FN F8 on Windows 7 Starter x 86 (32 bit). I can turn on and off the transmission of my built-in WIFI, but not my built in 3 G mobile broadband (Sierra Wireless Gobi 2000). It has worked well so far. But then I had to send my Netbook for service because the screen stays black. An external monitor and it worked fine... In any case; They exchanged the motherboard and now LCD is well again. But my 3G connection does not work, because I can not activate the transmission of the antenna.

  Real conditions / situation / comments:
  (1) sierra Wireless Gobi 2000 3 G card is present in Device Manager, it is activated and shown without problems or restrictions.
  (2) I can even test the modem successfully!
  (3) under network connections the Sierra card is present but displayed with a red X. But I can't activate it.
  (4) in addition I can disable there despite the red X already indicated.
  (5) when I run Toshiba Wireless manager shows that the card is present but transmission is switched off. "Please switch on with FN + F8"... arrgh!

  I tried already following as follows:
  (1) all installed available and past Sierra drivers Sierra 3 G driver (v1.1.140; 05/03/2010; 37.58 M)
  (2) because of the BIOS update to the latest version 1.50 = wireless connection switch is activated = and the WIFI worked very well...
  (3) installed last Toshiba Value added Package (v1.3.6; 09/04/2010; 44.36 M)
  (4) installed last Toshiba Flash Cards Support Utility (v1.63.0.5C, 28/12/2009; 9.38 M)
  (5) installed last Toshiba 3 G Connection Manager (v2.1.97, 20/05/2010; 29.28 M)
  (6) perform a restore of the entire system with recovery system (installation of a 1:1 copy of the delivered original from drive C :) partition
  (7) tried another way to complete a new installation of Windows 7 starter x 86 emty C: drive and installed the drivers from the Sierra as well as the added value of Toshiba utility to support package and flash cards
  (8) tried 3rd party software to control the connection 3 G MWCONN (found here: www.MWconn.info)-the config.exe can activate the transmission for a few seconds using the function "device / network analysis / start". This causes the broadband connection blue LED on the fronside of my netbook to be turned on for a few seconds. But üfter the test off again. So I turn on the transmission temporarily but not permanent. AND - THERE IS A MEANS OF TRANSMISSION OF SWITCH ON BY MEANS OF THE SOFTWARE! - But HOW...! ?

  What have I not tried again:
  (1) find someone with the same netbbok NB305-N410BN-G-online exchange the hard drive temporarily to test and market the Sierra 3 G in my netbook. It will be very difficult because I'm sitting in Germany actually...

  !!! Help, please! = does not, or no matter who else had same or similar problem...?

  Thanks in advance for any kind of useful tips and ideas!
  E U C A L L I

  and I also tried following:

  (9) the "Reset Flashcards" software solution

  EUCALLI

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• I bought the HP 7 window to Malaysia & it works normal, but when I'm at home in Myanmar, my computer can not activate because limited geographically with error code 0xC004C017 code

  Dear Sir.

  I can't activated Home Premium window 7 in geographically limited right, about, I bought Home premium Windows 7 in Malaysia & normal work but when I got to the House of myanmar, my computer some problem & I do factory setting of window 7 activate the window 7 but can not activate because geographically limited.
  I bought at the Malaysia (restriction of activation is Distribution and activation required to be held in South East Asia except Singapore), my country is myanmar's Southeast Asia too, why occur geographically restricted. My country myanmar is Southeast Asia. Please solve this problem fix for activation.
  my email address is * address email is removed from the privacy *.
  E-mail address is removed from the privacy *.
  Best regards
  TIN TUN AUNG, Myanmar
  Phone 959 5137238 {}

  Original title: code 0xC004C017

  Try to use the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• I did a clean install of Windows 7 teacher instead of an upgrade installation and now I can not activate Windows.

  Setup for Win 7 Prof error can not activate.

  I did a clean install of Windows 7 teacher instead of an upgrade because of idiocy. Now it does not accept my product key. Is it possible to set which does not imply a costly phonecall?
  Partial product key: PW487
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 4
  Trust time: 19:51:25 08/02/2012
   
  Try the Activate by phone:
  
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows can not activate at this time, try to activate Windows later.

  I bought my laptop 2 months ago and activated windows when I started it upward. Last week, however, for some unknown reason my laptop won't start properly so I had to do a restore to an earlier date. This good all worked but every time I start up it takes me to the screen of the PC settings and tells me to activate windows. When I click on activate "control key" text flashes for a split second, then disappears, nothing happens and it says above "Windows can not activate at this time, try to activate Windows later. If the problem persists, contact Microsoft and online support to activate Windows. "It is incredibly boring because all the days Windows spends half an hour to start the download of updates only so he can fail and take half an hour to undo the changes." My laptop came with Windows 8, so I have not updated. I know my activation key but have nowhere to enter the PC changes screen. I also tried to run the slmgr.vbs-ipk command prompt - followed my unsuccessful activation key, I get error 0 x 80070426. When I go to the Control Panel, system and security, Center of the action, activation of windows and click on activate since there I get error 0xC0000022

  Any help would be appreciated.
  Thank you in advance.

  Please see the link I copy below. Hope it will work for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/why-i-cant-activate-my-Windows-8-Pro/7d7ca188-9c05-4539-95f9-eecd8775927b?msgId=375c5a63-47fc-4EC1-983F-eb18f6e0cf3b

• Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

  Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

  Acrobat 7 is not compatible with windows 10.

  I recommend you upgrade to Acrobat DC. (Plans and price |) Adobe Acrobat DC )

  Kind regards

  Rahul

• I installed MCS on my new windows 7 and can not activate

  I installed MCS on my new windows 7 and can not activate. Any suggestions?

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/