can not back sd 8 GB card

Similar Questions

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• I CAN NOT BACK - UP MY COMPUTER, I GET A CODE OX810000ED AND I do not KNOW HOW TO follow up AND the CORRECTION of THE PROBLEM, THINK YOU. John

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • errow message 0x810000ed
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
  1 are you using the backup and Restore Center or any other tool to save the files?
  2. when exactly you get this error code? It's when you launch the tool, or when executing backup?
   
  We have checked for the error code you provided and not found any information about it. We recommend that you check the error code to see if it is correct. Many users have fixed the problems of file backup by following these steps.
   
  Step 1: Check the status of dependent services backup.
  1. Click Start, type services.msc and press to enter.
  2. from the list of components, double-click Backup Windows and Volume shadow copy services.
  3. make sure that the startup type is automatic and the services are started.
  4. apply the settings.
   
  Step 2: Check the hard drive in order to correct mistakes.
  1. Click Start, type cmd, right-click cmd, and then click Run as administrator.
  2. at the prompt, type chkdsk /f /r and press to enter.
  3. once the scan is complete, close the window.
   
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
   
  Step 3: Start the backup.
  1. click on Start, backup and restore, the list right click on backup and restore, then click on run as administrator.
  2. try to create a backup and verify the result.
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Adobe can not suddenly charge my credit card

  I can't contact them.  Do I get a prepaid card or am I forced to simply switch to another software platform?  I had extreme problems with the Adobe customer service.  :-)

  The 'them' that you can reach means Adobe Customer Service?

  Here's a URL for Adobe CS billing issues:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_payments-invoice s-orders_stillNeedHelp

  I'm just another user like you if don't have any information about your situation, but if something has happened to the State of your credit card, and perhaps you can contact the card-issuing bank and see if they see something strange.  Maybe it's that you'll have to find another card to pay with, even if she does not have to be paid in advance, or at least mine isn't, it's just a debit card from my local Bank Bank.

• can not buy more than one card in photos

  I made a map in Photos project. When I want to buy maps (I need at least 40 copies), I can't. I have only one. When I click on change the number, a message appears on an unexpected error.

  I managed to order a card, but I don't want to do this 40 times because I don't want to pay shipping costs 40 times.

  I have only one. When I click on change the number, a message appears on an unexpected error.

  I just tried.  When I try to increment the number of cards by clicking on the "* +" button, this error will occur. If I type a number directly into the textfield with the quantity, I can change the quantity. And I will see a prompt for you to connect to the App Store with my AppleID and can proceed with the order.

• Lenovo g550 can not use wifi or video card after clean install of windows 7 ISO generic

  My hard drive crashed and I have no cd of restoration windows does not see the WIFI card or video now. I updated the drivers to support, but there's work to see them. I tried not to update the version of the bios again. Y at - there a step I'm missing?

  Update: wifi was disabled in the BIOS, so I allowed it and re-installed video driver and it worked as well.

• I can not back up my computer, or use Windows Proformances system check

  When I try to back up my computer or let windows create a system image and save, it will only create the system image and I just get an error message, I think this all started when I started having problems with my (say unavailable event log)

  Hi Frederic,.

  Write to us with the following information.

  (1) what is the accurate/complete you get error when you try to perform a system image?
  (2) that monitor performance of the system do you want to?

  (3) do you have any third-party security software or antivirus installed on your computer?

  (4) did the problem started recently?

  (5) as 'use of Windows System performance check' what are you referring?

  (6) are you referring to any utility troubleshooting? If so, then what convenience store?

  You can follow the links below.

  Backup and restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/backup-and-restore

  What is a system image?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-a-system-image

  Write the asked information. We will help you to come.

• Can not find the 2nd network card

  Hello

  I am running Server 2008 R2 on a virtual machine Workstation 8. I have two network cards on the physical basic machine (a regular cable and one wireless).

  However, I don't see the adapter wireless on my vm 2008. Literally, on the basic professional regular W7 OS, I see two adapters network from the Device Manager, but only the wired adapter from the Device Manager on the guest OS 2008.

  I have as full Server 2008 network settings.

  The two cards are activated in the base OS (in the case that has something to do with it).

  I would be grateful for any ideas about whyh, I see only the an adapter of my vm. Thank you!

  VMware has only a wired Ethernet adapter to the virtual machine, and if you want a WiFi network card in the virtual machine, then you will need to provide your own USB WiFi network adapter.

  If you're just trying to use the network adapter WiFi from the host to the bridge of one of the VMnets him and then use the virtual network Editor to remove the automatic bypass on VMnet0 and assign it the target adapter network host of choice.

• Can not activate WIFI on Satellite P200-1FY

  Hello =)

  First of all, I apologize for my bad English, I will do my best to be understandable!
  So, I got a problem with my satellite P200-1FY: I can not activate the WI - FI card. I have try the combination of keys (fn + F8), and it does not work. I check the center of mobility of Vista in the Control Panel, it says that WIFI is not activated, but [I can't click on the button to activate it. | http://anonlinepieceofmymind.com/blog/images/wifi.jpg]
  I have the latest version of the driver for the wireless card, so I can't understand why it won't work. (but maybe just because I'm just a total beginner ^_^')

  Thank you for your time and help,
  Edward.

  Have you turned on the switch on the side of laptops?
  I put t know not which way the switch is present, but check it must be somewhere on the side.
  This switch must be turned on everything first, then you can use the FN + F8 key combination.

• I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Radeon hd5450

  I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Hi Edrey Davila,

  1. what operating system is installed on the computer?
  2. are you sound the computer?

  If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• T2i can not format the card

  I used this card several times. I copied the files on my computer properly. When I put the card in the camera to format and turn on the camera, it says "No card in the camera" all my other cards work fine. I can still read the map with my card reader.

  How can I fix this card? Because the camera does not recognize that there is a car in the slot, I can't reformat the card in the camera.

  Have you tried to format it on your computer & card reader? If this does not work, I would recommend replacement before you have important pictures on it & can't get back them. The cards are not that expensive these days.

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems