Can not find doamin during the creation of a Pool of linked Clone

Similar Questions

• BlackBerry smartphones can not find pictures during the transfer to computer

  I have these settings on my storm. WE map media. PSG ON. MSM ON. Automatic YES MSM. When I use the software on my computer to transfer my photos from Roxio, in my view, nothing happens and I get an error message. When I look at the map support when it is connected to my computer, all I see is the music files I have loaded on it. I have more than 50 pictures that I want to move my lap top. Anyone has any ideas. Also after a photo is broken and loaded on the storm and when your research in this field and zoom in for a close can save you the fence up to as a separate peak. Thank you very much Mike

  stltrains wrote:
  When I look at the map support when it is connected to my computer, all I see is the music files I have loaded on it. I have more than 50 pictures that I want to move my lap top. Anyone has any ideas.

  Talk to your computer, close Desktop Manager and Roxio.

  On your PC, open my computer > and choose one of the removable drives, could be named 'BlackBerry' on readers, E, F, G or H, more common. Explore here to BlackBerry > user > pictures.

  ^^ Your path above could vary.

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  Hi drdrum,

  Greetings!

  Update the software of camera raw as Canon 5DSR is supported camera raw version 9.0 and above.

  Here is the download link: https://helpx.adobe.com/x-productkb/multi/update-error-u43m1d204.html

  Also, here is the list that displays the camera with respective camera raw support:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Concerning

  Jitendra

• Can not see any of the website features especially icons to link

  Can not see any of the website features especially icons to link

  See:

  • http://KB.mozillazine.org/Website_colors_are_wrong

• can not find size_t during import a dll and calling a labview crash function

  Hello, experts

  I need to use FingerLakeInstrument DLL (see attachment) within Labview for talking to a CCD camera. It is built from microsoft visual studio C++

  I unzip FLI dll in my D:\proj\...\linfli-32 and import the dll from there. created a c:\FLIDBG.txt FLI dll must write the debug message on it if are called the FLISetDebugLevel() or others.

  During the import of the dll, the first thing I got is (IE size_t) could not be found. I installed the free version of microsoft visual studio C++

  but can not find 'typedef unsigned int size_t;

  in the end, I just added

  typedef unsigned int size_t;

  in the libfli.h. Having done this, I am able to import all the functions in Labview and have a library of user called libfli.

  However, as soon as I start to call a simple function in a test.vi, as FLIGetLibVersion (char * worm, size_t len), which consists of nothing else the library, the labview crash.

  I created a simple C test.exe who calls a lot of functions with no problems

  any suggstion?

  concerning

  Xiaofeng

  You don't have not shown us how the LabVIEW code looks like. The size_t setting refers to the length of the buffer, in that you spend. In this case you pass a string. So, presumably, you created a buffer zone in LabVIEW to a string of sufficient size, and set the parameter "len" to the length of this string. You also have to make sure you use the correct calling convention?

• None of the links in my table of contents or INDEX works. Can not find file is the error message.

  The files on a network drive. Win7. FM 8. I renamed the files. Regenerated. Created a new book. Nothing works.

  I have no dashes and underscores in file names, but no other special character.

  Need for emergency assistance.

  The error message is:

  Can not find the file named

  \SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.

  FM.

  Make sure that the file exists.

  ______________

  Note that the table of contents and INDEX are listed in the book without a path while the chapter of body is the entire path (above) in the book view.

  Thank you

  IIRC, FM8 had a problem with a path with no subfolders 5 (or 6?). Try to put files up to a few levels or create a mapped network drive down to the lower levels.

• I just load windows 8 and all my office applications have disappeared. even can not find them in the list of programs, I am retired and was a dealer of microsoft my laptop had all about it at the office.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  I was in windows 7

  Assuming that you have chosen not to keep your programs and your files (it certainly seems like that) - then you will need to install Microsoft Office from your installation media using your product key.
   
  

• Windows XP Pro can't find HD during the startup of the CD process.

  Lately, when my computer starts, it began to automatically run the disk check process. During the process, several files are either deleted or recovered. It's embarrassing so I tried to repair Windows XP Pro OS. The problem is that Windows does not detect the drives. I tried the ASR system, the R option to repair, and continues even with the start of the CD but Windows reports it cannot locate my hard drives. My motherboard is GA-81955 X Royal Gigibyte with 2 IDE hard drives of 40G and 2 DVD/CD players. Thanks for any help.

  The problem is in the AVG Antivirus software that I had to uninstall and remove all references to it in the registry. With no antivirus on the computer software, everything worked fine.

  Then, recently, there was an automatic update of Windows that enamored System32 of the computer records. Due the Gigibyte motherboard and how second HDD and DVD/CD player were to be installed to operate Windows has not found any drive C.

  To get the C drive to work again I had to remove it and install it in another computer as a slave drive XP then manually restore the files of System32. The restored files are not the same that have caused other problems. I tried to reinstall only the C drive and 1 DVD/CD drive but windows still not able to perform automatic recovery. Spent several weeks to correct the problems and reinstalling the software.

  The best solution would have been to reformat the C drive and reinstall the software, but I didn't know if I had backed up all my data.

• Could not find instant during the construction of office linked clone.

  I am trying to build a non-persistent desktopool automated using a linked clone. She finds the parent VM, but it does not find the snapshot used as image to the next step. The computer virtual machine has a snapshot on it.

  The master VM is turned off?

  And also the wink has built with the virtual machine off?

  André

• I've just updated to the version of thunderbird 38.2.0 and can not find or access the calendar. SOLVED manually install the calendar

  I use windows 7 64-bit.
  I used the add-on of the calendar in the previous versions.

  You can install Flash via Tools | Modules. If it is already there, make sure it is up-to-date and if not, update. If it is not checked, select it.

  We seem to have a few wrinkles at the present time. While the calendar is now available in an automatic and eventually installed download for new users, we see reports of established users who have disabled the calendar to find the reactivation of himself and you come from the other direction; you want the lightning, but he does not appear to have been offered.

  Basically, it is still an add-on and can be added, enabled, disabled and removed just like any other add-on.

• Microsoft users can not find me on the network

  I've updated to El Capitan, 10.11.2 yesterday and it was a complete disaster to date. My main problem this morning is that the PC in my office cannot see my computer on the network. The CMA can always.

  I opened everything, share, everyone has permissions to read & write. Not only can they not connect to me, they don't see even I exist.

  Worked until I upgraded to, does not now.

  Help.

  El Capitan v. 10.11.2

  iMac late 2012

  Intel Core i5 at 2.7 GHz

  I suggest that you try to turn off sharing, on again.

  If this is not enough, try to start safe mode and then start again normally.

• HyperTerminal can not open COM16 while Device Manager displays COM16. Process Explorer can not find COM16 or the other.

  On my laptop in docking station, I used hyperterminal to display incoming data through COM16.

  After departure, using stand-alone laptop computer and reconnect again, COM16 cannot open Hyperterminal again. Not even when the laptop is completely stopped and started again.

  Device Manager displays COM16, but trial Explorer cannot find either.

  Disconnecting and reconnecting the USB-RS232 port are detected by Device Manager.

  How to solve this problem?

  Windows does no accounting of the com ports?

  Concerning

  Hello Michiel,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• You will need to disable a computer. Can not find disable in the help section

  You can use PSE 13 on another computer. In the old computer in Photoshop elements 13, in the upper left corner, help,does not show an off button. What to do?

  davidp67511823 wrote:

  Hello.  In the same menu help, nor is it a logout option. What should do?

  You are in the editor or organizer?

  Are you on Windows or Mac, which version?

• Resources does not get generated during the creation of plugin for the release/debug version of CC 2015

  I'm trying to generate a plugin release/debug for 2015 of CC using the SDK version 11.2, the build succeeds with the message below:

  
  

  merge_res.cmd done.

  1 > removal of old resources...

  1 > not found \*.idrc C:\Users\CS\Documents\GitHub\CS-DTP\IndesignPlugin\CSDTPObserverPlugin\build\releasex64\ (CSDTPObserverPlugin.sdk, resources)

  1 > 0 or the files copied

  1 > create library...... \.. \build\win\objRx64\CSDTPObserverPlugin/CSDTPObserverPlugin.lib and object...... \.. \build\win\objRx64\CSDTPObserverPlugin/CSDTPObserverPlugin.exp

  1 > CSDTPObserverPlugin.vcxproj-> C:\Users\CS\Documents\GitHub\CS-DTP\IndesignPlugin\CSDTPObserverPlugin\build\releasex64\C SDTPObserverPlugin.sdk.pln

  1 > restore_res.cmd done.

  = All build: 1 succeeded, 0 failed, 0 skipped =.

  
  

  When you try to load the plugin in InDesign, I get below error:

  "CSDTPOBSERVERPLUGIN. SOFTWARE DEVELOPMENT KIT. PLN"plug-in is missing plugin resources or the model/UI attribute is not specified in the PlugIn Version resource!

  
  

  
  

  
  

  
  

  Could you please check the .fr file included in the project is set up correctly to compile and the compilation is successful with success for this file. You can quickly verify this by right-clicking on the file in VS .fr and check if the compilation shown option is indeed active and clicking Treaty the file successfully. If all this is correct, then the next step is to check the output created by this compilation, the path of the compiled files and the command-line merge_res.

  Hope this helps you

  -Manan