Could not find instant during the construction of office linked clone.

Similar Questions

• Could not find screws during the opening program on another computer

  I am new to FieldPoint so I think it will be easy to solve.

  Today, I visit our West Coast plant, gathering information on a test station which runs Labview 6i. Finally, this system will be moved to another location (midwest).

  I want to be able to recreate this system at home.  I copied the program Labview 6i the PC Tower in the lab and opened on my laptop (LV 8.x)

  While the program is loading, I invited some of the screws is not found: Open.vi FP, FP Read.vi and 3 other FP screws is because I do not have the field point drivers on my laptop?

  I am also invited to FULLY. DLL, I read a scan.vi and read a scan(single_point_waveform).vi is the FULLY. Room DLL of Fieldpoint drivers?

  Thanks for your help,

  Bill

  Bill:

  Yes, the vi FPxxx are part of the Fieldpoint installation. The tescom.dll looks like it is a software for a pressure Testcom ER3000 controller, see:

  http://www.Tescom.com/pdf_files/dopsm1893x012_lr.PDF

  Looks like the vi HAVE read that they are part of the tradition, as opposed to DAQmx DAQ hardware drivers (drivers for the hardware OR).

  -AK2DM

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• Windows 7 64 bit with Abra customer 6.3 error "" point procedure entry GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.

  When you try to run Abra Client Version 6.3 on Windows 7 (64 bit) system we get the error message "" the procedure entry point GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.  The following error message is "the VFP6R. DLL file is invalid or damaged. "Does anyone have a solution?  We have become very dependent on this old Abra Suite and would not lose him.

  Thanks for the help, Bill.

  I tried the compatibility mode with the same results.  I installed the XP mode software and installed Abra in this virtual network and it works perfectly.

  Take care

  Johnnie

• Error Acrobat.exe - point of entry not found the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  When you try to save a file that I changed, the file will not save and I get the following.

  the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  New computer Windows 7, the new standard Acrobat installation.

  How can I fix it?

  Hi koko,.

  This happens with a specific file?

  Have you tried to update Acrobat on the last patch v11.0.09 and verified?

  If it please try to repair Acrobat in the 'Help' menu and check if you still faces questions.

  Kind regards

  Rave

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 1601 Windows Installer could not be accessed during the installation of Turbo Tax 2009.

  I try to install Turbo Tax 2009 on a Dell Inspiron 530.  I get the message that Windows Installer could not be accessed.  I tried all the fixes I could find and nothing works.

  When I try to install install 4.5 Redistributable, a dialog box appears saying "the update does not apply to your system" no matter which I choose in the list to download.

  What is going on?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Try the repost in the Forum Vista programs at the above address.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• Could not find photos in the computer anywhere except Windows Media Center.

  Original title: Windows Media Center hides my videos of me?

  I have windows media center, and I imported my blackberry videos. I can't find the videos anywhere on the computer, but when I go to the images on Windows Media Center. It is not sensible, and I can't download videos anywhere because my computer can not find them. Is there anyway to add to the computer and to get them off Media Center? I never got so bad to do something on a computer. I can't believe that the Media Center doesn't let me see the media outside himself. So, if anyone has the answer please help me.

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes on your computer before this problem?

  You can search pictures by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: How to search for files and folders in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• Error - Windows needs to continue Setup could not be installed during the upgrade to Service Pack 2.

  Original title: computer locked up on upgrade to xp p2.

  I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer.  I tried safe mode, but it kicks me back to the same screen

  Hi jodyjones,

  You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.

  How to use the automatic recovery feature to recover your computer or your Tablet PC if the Windows XP Service Pack 2 Setup program is not completed successfully

  
  Reference: installation of the Service Pack 2 (SP2)

  Hope the helps of information.
  Please post back and we do know.

• Custom dialog box could not be shown during the event of 'onCreationCompleted '.

  My application has a 'Warning' dialog box which must be indicated when the application is launched. There are two options in this regard. If users do not accept the warning, the app will be closed. I put it in the onCreationCompleted event handler in the first screen, but it could not be shown there. But I tried to click on a button to open it, it can be displayed correctly.

  I also tried with the dialog system, it can be shown correctly in the event of onCreationCompleted. But I couldn't use it cause my warning dialog box has a complex user interface design.

  attachedObjects: [
      CDialogDisclaimer {
          id: cddisclaimer
      }
  ]
  
  onCreationCompleted: {      try {
          cddisclaimer.open();  //Checked the log, no error, just could not show    } catch (error){        console.log("custom dialog error:"+error.message);    }
  }
  

  Does anyone knows how to fix this?

  Thank you.

  Hello

  It's very strange. Could you try to open it from Manager QTimer onTimer?

  Try to set a large interval first, then, if it works set to 0 msec.

  This page contains a snippet of code to start the timer in QML (search for "QTimer"):

  https://developer.BlackBerry.com/Cascades/documentation/dev/integrating_cpp_qml/index.html

• Getting the error "there was a problem starting C:\Program. The specified module could not be found"during the uninstallation of Panda antivirus.

  When I try to download a new security software on my laptop, he insisted first of all, I uninstall my existing software, but when I click on uninstall, I get the following message:

  "There was a problem starting C:\Program. The specified module could not be found. »

  Then, I went in my C: drive and tried to uninstall by clicking on it and clicking Security software on uninstall, but the same message came.

  Help, please!  I don't know that I now have no security.

  Thank you.

  Original title: Windows 8 - error DLL Run

  Use the uninstall program to remove it from the computer:

  http://www.pandasecurity.com/resources/SOP/Uninstaller.exe

  Directions for use:

  http://www.pandasecurity.com/homeusers/support/card?ID=55509

• Get "the file could not be created" during the recording of RAW to JPG in Photoshop CS6

  I've been editing countless Canon. Files RAW CR2 in Photoshop CS6 (v. 13.0 x 64 Extended), that uses the plugin Adobe Photoshop Camera Raw (v. 7.1.0.354), for the years and check in. JPG. But now ithased suddenly stopped working. When I save a file, it says "the file could not be created." My computer is a MacBook Air running OS X Yosemite v. 10.10.5. Nothing about the one who has changed recently. Photoshop has simply ceased to save files that I have edited. (It does not create the.) XMP files, however.)

  I really need to be able to do this work. Help, please. Thank you!

  Hi davids

  What happens when you save the file to a different location?

  Also to update your rough version of the camera to 9.1.1

  Download link:-http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/9.1.88/setup.dmg

  Concerning

  Assani